Professional Documents
Culture Documents
Adopt super high efficiency rectifier ZXD3000 V6.0 with 98% peak efficiency, save
energy loss during power conversion process, and can be compatible with high
efficiency rectifier ZXD3000 V6.6 with 96.7% peak efficiency, flexible choice for
customer.
Rectifier module support work in the sleep mode to maximize system efficiency, the
power consumption of the rectifier is lower than 4W in this mode.
High power density up to 48.8W/in3, making optimum space utilization.
85V~295V wide input voltage, high adaptive to poor grid to protect battery.
The system can be remotely managed through a computer installed with Web explorer
anywhere if Ethernet is available.
Storage expansion through the USB interface, realize fast roll-out by batched
configuring site information.
Rectifier easy touch function enables operator of convenient communication between
CSU and multiple rectifiers.
Providing dry contacts, RJ45, RS232, and RS485 interfaces. Meeting the requirements
of HTTPS, SNMP networking to save maintenance and initial investment.
Parameters Description
Model Type ZXDU68 B701 V6.0
Rectifier module ZXD3000 V6.0 or ZXD3000 V6.6
CSU module CSU602A
AC input
Input type three-phase five-wire (L1/L2/L3/N/PE)
Input voltage range 85V AC~295V AC
Frequency 50/60Hz
Input power factor ≥0.99 (100% load)
AC input 1 × 125A/3P
AC SPD B+C
DC output
Output power Maximum 42kW
Output voltage -53.5 V (-42V ~ -58V adjustable)
Rectifier: 1-14 PCS
Module capacity Solar PU: 1-14 PCS
Rectifier + solar PU≤14
Peak efficiency:
98% for ZXD3000 V6.0,
Module efficiency
96.7% for ZXD3000 V6.6,
98.5% for ZXDT02-PU3000 V3.0
Supporting 3 tenants, DC breaker max 20P
Tenant 1:
LLVD1: 2×125A MCB,1×32A MCB
LLVD2: 2×63A MCB
Tenant 2:
LLVD1: 2×125A MCB,1×32A MCB
Load distribution LLVD2: 2×63A MCB
Tenant 3:
LLVD1: 2×125A MCB,1×32A MCB
LLVD2: 2×63A MCB
Remarks: The above is a typical configuration. The breaker of the same-
level shell can be replaced,the rest can be install in the power distribution
panel.
Battery distribution 125A/2P*3
DC SPD In=15 kA (8/20 μs)
Controller
Networking mode TCP/IP, SNMP
Communication interface RS485,RS232,RJ45,USB
Environment port Battery temp. ambient temp. flooding, door, smoke, humidity
Operation environment
Operation temperature -40℃~+70℃,
Storage temperature -45℃~+75℃
Humidity 5% ~ 95%
0 to 2000 m: 100% output power;
2000 to 3000 m: The power derating percentage is 1% when the altitude
Altitude
increases by 100 m. Customer shall use system under derating
consideration.
Structure
System Dimension 9U × 482 mm × 360 mm (H × W × D)
Chassis weight: 25kg (not including rectifiers);
Weight
Rectifier weight: 1.8kg/set
Standard
Safety IEC62368; GB4943
EMC IEC61000, EN 55032
Others
MTBF ≥2 × 105 hours
NO. 55, Hi-tech Road South, ShenZhen, P. R. China
Postcode: 518057
Web: www.zte.com.cn
Tel: +86-755-26770000
Fax: +86-755-26771999