SURFACEBURN —VERTICALBURN HORIZONTAL BURN
9 ee
ma ? :
Doesn't Ignite Self Extinguishing Slow Burn Rating
Under Hotter Flame —_UL94 V.0 (Best) Takes more than
ULaa 5vA ULS4 V-1 (Good) 3 min. to burn
UL94 SVB ULS4 V-2 (Drips) 4inches
UL 94 Flammability Ratings Summary
SVA__| Burning stops within 60 seconds after five applications of five seconds cach
Surface Bum | ofa flame (larger than thot used in Vertical Bur testing) to atest bar. Test
specimens MAY NOT have a bur-through (no hole).
‘This is the highest (most flame retardant) ULY4 rating.
SVB | Burning stops within 60 seconds after five applications of five seconds cach
Surface Bum | of flame (larger than that used in Vertical Bum testing) to a test bar. Test
specimens MAY HAVE a bur-through (a hole).
V-0 | Burning stops within 10 seconds after two applications of ten seconds each
Vertical Bum | ofa flame to a test ber. NO flaming drips are allowed.
V-1 | Burning stops within 60 seconds after two applications of ten seconds each
Vertical Bum | of, flame to a test ber. NO flaming drips are allowed.
V-2 | Burning stops within 60 seconds after two applications of ten seconds each
Vertical Bum | of, flame to a test ber. Flaming dips ARE allowed.
HB | Slow horizontal burning on a 3mm thick specimen with a burning rate is,
Horizontal | less than 3"/min or stops burning before the 5" mark. H-B rated materials,
‘Bum | are considered "“self-extinguishing’.
This isthe lowest (least flame retardant) UL94 rating.