Professional Documents
Culture Documents
9852 3593 01f Settings COP 2550UX+ Ver. F
9852 3593 01f Settings COP 2550UX+ Ver. F
Settings
COP 2550UX+ Ver. F
Worksite: ___________________________________________________________________
Drill rig type: ___________ Serial No.: ___________ Manufacturing No.: ___________ Feed No.: __
COP: _____________ Serial No.: AVO _______________ Rotation motor size: _____________
Make sure the hydraulic oil have reached normal working temperature before adjusting the base settings.
The rock drill pressures in this document refers to the pressure at the rock drill intakes. The hydraulic
pressure at the operator panel is usually 5-10 bar above the pressure at the rock drill.
……………………………………………… …………………..
Service engineer in charge Date