Professional Documents
Culture Documents
Qj241 Brochure English
Qj241 Brochure English
TECHNICAL SPECIFICATIONS
Crusher
Adjustment type Hydraulic Wedge Diesel tank capacity 660 litres / 174 USG
Drive Hydraulic via V Belts Hydraulic tank capacity 660 litres / 174 USG
3.22 m / 10’ 6 ⅝”
13.74 m / 45’ 1” 3.23 m / 10’ 7 ¼”
B5-324 ENG rev5 © Sandvik Construction 2016 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
3.86 m / 12’ 7 ⅞”
1 Heavy duty shaft and bearings 4 Jaw guard to withstand heavy
with automatic greasing 2 forces of ejected material from
system as standard the jaw
4
5
1 5 Mn corrugated jaw plates
2
Level sensor to optimize feed 3
rate into the crusher (optional)
CONSTRUCTION.SANDVIK.COM
5 The material in this brochure is of general application for information and guidance only, and no representation or warranty is made or given by the manufacturer that its products will be suitable for a customer’s particular purpose and enquiry should always
be made of the manufacturer to ensure such suitability. Whilst every effort has been made in the preparation of this document to ensure its accuracy, the manufacturer assumes no liability resulting from errors or omissions in this document, or from the use
or interpretation of the information contained herein. The manufacturer reserves the right to make changes to the information in this brochure and the product design without reservation and without notification to users.
Q J 241 JAW C R U S H E R
ENGINEERING IN MOTION
(3B only)
– Improved load control system for blockages and for crushing asphalt – Large capacity 660 litres / 174 USG
the feeder drive to ensure continuous, – Level sensor fitted to jaw to optimize feed diesel tank
uninterrupted crushing rate into the crusher (optional)
– Wear resistant liner plates (optional)
FEATURES INCLUDE:
– Emissions compliant 168 kW / 225 hp engine for
powerful cost efficient performance STANDARD FEATURES
– Automatic central lubrication system to reduce
maintenance time
– 50°C ambient temperature capability without the
need for a change of oil
– Reverse crushing action to relieve blockages, crush
sticky problematic materials and asphalt
– Jaw level sensor available for optimum regulation of
material flow into the crusher
– Designed for optimum fuel economy and low
operating costs.
Hydraulic raise and lower facility User friendly PLC control system with colour screen Steel pipework for better heat dissipation Easy access to engine compartment Tunnel arrangement Extended main conveyor for massive stockpiling
2 4