Professional Documents
Culture Documents
TURNBUCKLE
RANGE
2012
Product Catalogue
High Performance
Forged Chrome Bronze
Turnbuckles & Terminals
HAMMA Regatta open body turnbuckles have been designed to
match the extreme high performance of the HAMMA X and HAMMA
Pro cables for the dinghy, racing and cruising markets.
The HAMMA range of conventional and compact stainless steel
REGATTA wire strand has up to a 30% higher minimum breaking strength
FORGED CHROME BRONZE RIGGING SCREW
(MBS) than our competitors... so the challenge was to engineer a
range of rigging hardware that could match the increased
performance of our wire.
Made from the highest quality materials, and manufactured using
the latest cutting edge technology, a complete range of turnbuckles
Laser etched unique ID for traceability and terminals are now available.
When extreme performance, corrosion resistance and durability
count, the HAMMA Regatta range has been engineered to provide
Infinity design profile with increased the ultimate standing rigging solution.
material in critical stress areas.
root section
(minor diameter)
Cut Thread
Granular lines of a cut thread are completely cut through leaving the threaded
roots (minor diameter) exposed as high stress points for tensile stress buildup.
with Micro-stretch Technologies.
Technical Data
Material : AISI316
Construction : Compacted strand
Modulus : 132 +/- 10kN/mm2
Of Elasticity
Note : Limit tension is calculated
1x7 1x19 1x25
1x37 1x61 at 60% of MBL
HAMMA X-STRAND has been the leading conventional strand used in the southern hemisphere for over 20 X treme Outperformance
years, mainly due to a minimum breaking strength (MBS) that is up to 30% greater than our competitors.
The HAMMA Regatta range of fittings have been engineered to compliment this market leading product to Minimum Breaking Strength (MBS) of HAMMA X-STRAND is up
ensure your standing rigging performs when you need it to... when high performance and reliability count. to 30% greater than other leading brands
Material : AISI316
Technical Data Construction : 1x19 spiral strand
Modulus of Elasticity : 132 +/- 10kN/mm2
Note : Limit tension is HAMMA X !"#$%&'"()* !"#$%&'"()+
calculated at 60% of MBL
Product
Information
2012
A
Technical Data
D Toggle : Sheet AISI316 – EN 1.4401
Terminal : Bar AISI316 – EN 1.4401
Body : Bronze
Hex Nut : Forged AISI36 – EN 1.4401
Supplied : Both Hex Nuts & Split Pins
as standard
Turnbuckle Toggle-Swage (Metric Wire) Note : Limit tension is calculated
at 60% of MBS
A
Technical Data
D Toggle : Sheet AISI316 – EN 1.4401
Terminal : Bar AISI316 – EN 1.4401
Body : Bronze
Hex Nut : Forged AISI36 – EN 1.4401
Supplied : Both Hex Nuts & Split Pins
as standard
Turnbuckle Toggle-Swage (Imperial Wire) Note : Limit tension is calculated
at 60% of MBS
!!"!
A
Technical Data
D Toggle : Sheet AISI316 – EN 1.4401
Body : Bronze
Hex Nut : Forged AISI36 – EN 1.4401
Supplied : Both Hex Nuts & Split Pins
as standard
Note : Limit tension is calculated
Turnbuckle Toggle-Toggle at 60% of MBS
B
Technical Data
Body : Bronze
Note : Limit tension is calculated
at 60% of MBS
Turnbuckle Body
Technical Data
A
Toggle : Sheet AISI316 – EN 1.4401
D
Terminal : Bar AISI316 – EN 1.4401
Note : Limit tension is calculated
at 60% of MBS
Technical Data
A
Toggle : Sheet AISI316 – EN 1.4401
D Terminal : Bar AISI316 – EN 1.4401
Note : Limit tension is calculated
at 60% of MBS
L
Technical Data
Terminal : Bar AISI316 – EN 1.4401
Note : Limit tension is calculated
at 60% of MBS
Technical Data
L
Terminal : Bar AISI316 – EN 1.4401
Note : Limit tension is calculated
at 60% of MBS
Technical Data
A
Toggle : Sheet AISI316 – EN 1.4401
L Terminal : Bar AISI316 – EN 1.4401
Note : Limit tension is calculated
at 60% of MBS
C
L1
B
A
Technical Data
Eye Terminal : Bar AISI316 – EN 1.4401
L
Note : Limit tension is calculated
at 60% of MBS
Threaded Eye
C
L
B
Technical Data
A
Eye Terminal : Bar AISI316 – EN 1.4401
Note : Limit tension is calculated
at 60% of MBS
RGT-EYEM-0506
RGT-TTSM-0506 5 23.0
11 12.0
26.5 9.0
9.5 GAGC=%
9.8 107 GCA==%
>AGC=% 3,270 32.1
GBC>%
RGT-EYEM-0606
RGT-TTSM-0606 6 25.0
11 13.5
26.5 9.0
9.5 GGGC=%
9.8 119 GFE==%
>GGC=% 6,800 66.7
G?CG%
RGT-EYEM-0607
RGT-TTSM-0607 6 30.0
14 18.0
29.5 10.2
11.0 11.5
GD>C?% 133
?=GC? 6,800
?F===% 66.7
>@CB%
RGT-EYEM-0608
RGT-TTSM-0608 6 30.0
14 18.0
29.5 12.0
12.7 13.2
G@EC=% 133 EFD==%
?BEC=% 6,800 66.7
EECH%
RGT-EYEM-0708
RGT-TTSM-0708 7 30.0
14 18.0
29.5 12.0
12.7 13.2 ?AEC=
>=EC=% 144 8,800
EFD==% 86.3
EECH%
RGT-EYEM-0808
RGT-TTSM-0808 8 30.5
14 15.0
29.5 12.0
12.7 13.2
>BEC=% 156 EFD==%
?GEC=% 10,700 105.0
EECH%
RGT-EYEM-0810
RGT-TTSM-0810 8 38.0
18 22.0
37.0 15.0
15.8 16.5
>H>C=% 166
EB>C= 11,200
B=F@==% 109.9
B=EC@%
RGT-EYEM-0910
RGT-TTSM-0910 9 40.0
18 21.0
37.0 15.0
15.8 16.5
>@>C=% 177
EG>C= 12,300
B=F@==% 120.7
B=EC@%
RGT-EYEM-1010
RGT-TTSM-1010 10 40.0
18 21.0
37.0 15.0
15.8 16.5
?=>C=% 187
E>>C=% 12,300
B=F@==% 120.7
B=EC@%
RGT-EYEM-1212
RGT-TTSM-1212 12 44.0
22 26.0
42.0 18.0
19.0 20.0
?@>C= 230
H?>C= 18,000
B?F@== 176.6
B?EC=
RGT-EYEM-1414
RGT-TTSM-1414 14 52.0
25 27.0
46.0 21.0
22.2 23.0
EEDC> 285
DGDC> 23,900
ABF?== 234.6
AB=C@
RGT-EYEM-1616
RGT-TTSM-1616 16 62.0
28 34.0
54.0 25.0
25.4 26.5
H>@C= 299
@G@C= 29,700
ADFG== 291.4
AHHCE
D
C
L
B
A
Technical Data
Eye Terminal : Bar AISI316 – EN 1.4401
Note : Limit tension is calculated
at 60% of MBS
RGT-EYE-0606
RGT-TTSM-0506 3/16”
5 23.0
11 12.0
26.5 9.0
9.5 GAGC=%
9.8 107 GCA==%
>AGC=% 3,200 31.4
GBC>%
RGT-EYE-0706
RGT-TTSM-0606 7/32”
6 25.0
11 13.5
26.5 9.0
9.5 13.5
GGGC=% 119 GFE==%
>GGC=% 4,900 48.1
G?CG%
RGT-EYE-0807
RGT-TTSM-0607 1/4”
6 30.0
14 18.0
29.5 10.2
11.0 11.5
GD>C?% 133
?=GC? 6,600
?F===% 64.7
>@CB%
RGT-EYE-0808
RGT-TTSM-0608 1/4”
6 30.0
14 18.0
29.5 12.0
12.7 13.2
G@EC=% 133 EFD==%
?BEC=% 6,600 64.7
EECH%
RGT-EYE-0908
RGT-TTSM-0708 9/32”
7 30.0
14 18.0
29.5 12.0
12.7 13.2
>=EC=% 144
?AEC= 6,800
EFD==% 66.7
EECH%
RGT-EYE-1008
RGT-TTSM-0808 5/16”
8 30.5
14 15.0
29.5 12.0
12.7 13.2
>BEC=% 156 EFD==%
?GEC=% 10,700 105.0
EECH%
RGT-EYE-1010
RGT-TTSM-0810 5/16”
8 38.0
18 22.0
37.0 15.0
15.8 16.5
>H>C=% 166
EB>C= 11,200
B=F@==% 109.9
B=EC@%
RGT-EYE-1210
RGT-TTSM-0910 3/8”
9 40.0
18 21.0
37.0 15.0
15.8 16.5
>@>C=% 187
EG>C= 13,000
B=F@==% 127.5
B=EC@%
RGT-EYE-1412
RGT-TTSM-1010 7/16”
10 44.0
22 26.0
42.0 18.0
19.0 20.0
?@>C= 216
H?>C= 14,800
B?F@== 145.2
B?EC=
RGT-EYE-1614
RGT-TTSM-1212 1/2”
12 52.0
25 27.0
46.0 21.0
22.2 23.0
EEDC> 240
DGDC> 16,600
ABF?== 162.8
AB=C@
RGT-EYE-1816
RGT-TTSM-1414 16
5/8”
14 62.0
28 34.0
54.0 24.0
25.4 26.5
H>@C= 299
@G@C= 30,100
ADFG== 295.3
AHHCE
2012 Exclusive Agents
Southern Hemisphere
Northern Hemisphere
Structural Dynamics Europe Limited Structural Dynamics Co. Ltd. Structural Dynamics USA
Unit 10 Wingate Rd, Gosport Hampshire Satorn Business Park 36 Berta Circle
UK PO12 4DP 21/18, Krungthonburi Rd. Klongtonsai Daly City CA 94015
Tel: +44 (0) 845 262 5557 Klongsan Bangkok 10600 Thailand Tel: +1 (650) 276 0339
Fax: +44 (0) 239 294 0272 Tel: +(66) 2862 2487 Fax: +1 (650) 745 1401
Email: sales@strudyna.eu Fax: +(66) 2862 2488 Email: usa@strudyna.com
Email: sales@strudyna.com