DE LORENZO DL 2203SR
TEST N°2
VERIFICATION OF DE MORGAN’S THEOREM
PART A: FIRST OF DE MORGAN'S LAWS
Establish the test circuit
UIA
uiCc
7SHC04D_4v U2k a oe
iw 74HC04D_4V
iam | Sancosp_av 74HC32D_4V )
74HCO4D_4V
Connect piw A of the switches with pin A of the first NOT gate
Connect pin B of the switches with pin B of the second NOT gate
Connect pin AOUT of the NOT gate with pin Al of the AND gate
Connect pin BOUT of the NOT gate with pin A2 of the AND gate
Connect pin AOUT of the AND gate with one of the input pins of the logic probe
oaene
The following connection is obtained
,
Subsequently
». Connect pin A of the switches
”. Connect pin B of the switches
;. Connect pin AOUT of the OR
(overlapping the previous) with pin A1 of the OR gate
(overlapping the previous) with pin A2 of the OR gate
i gate with pin C of the NOT gate
. Connect pin COUT of the NOT gate with one of the inputs ofthe logic probe
wanes
ver 220120307peer DELORENZO
The following connection is obtained
SWITCH ON THE MACHINE by pressing the ON/OFF button
Set the switches Note the state of
A — Green LED the output of the |OUT=
- LED Green logic probes
‘Set the switches Note the state of
A= H—-Red LED the output of the JOUT=, OUT=
B= L-LED Green logic probes am rine
Set the switches Note the state of
|A=L—-Green LED the output of the OUTS. OUT:
B =H —Red LED logic probes ~ aE
Set the switches Note the state of
A=H-Red LED the output of the [OUTS our:
B=H-Red LED logic probes me
SWITCH OFF THE MACHINE, disconnect the connections and return the switches to position “L
‘Check on the effective equality of the two logic circuits implemented
: ‘ver 20120307,DE LORENZO
DL 2203SR
PART B: SECOND OF DE MORGAN’S LAWS.
Establish the test circuit
UIA
ie 12 U3A u2A ; uic
74HCO4D_4V ia + ooo
eee —[ [>
p aHc320_4v 74HC08D_4V _74HCO4D_4V
T4HC04D_4Vv
1. Connect pin A of the switches with pin A of the first NOT gate
2. Connect pin B of the switches with pin B of the second NOT gate
3. Connect pin AOUT of the NOT gate with pin A1 of the OR gate
4. Connect pin BOUT of the NOT gate with pin A2 of the OR gate
5. Connect pin AOUT of the OR gate with pin IN3 of the logic probe
‘The following connection should be obtained
Subsequently
6. Connect pin A of the switches (overlapping the previous) with pin Al of the AND gate
7. Connect pin B of the switches (overlapping the previous) with pin A2 of the AND gate
8. Connect pin AOUT of the AND gate with pin C of the NOT gate
9. Connect pin COUT of the NOT gate with pin IN4 of the logic probe
‘ver 220120307 9DL 2203SR
The following connection is obtained
DE LORENZO
SWITCH ON THE MACHINE by pressing the ON/OFF button.
Set the switches Note the state of
|A=L—Green LED the output of the — |OUT= jouT=.
B=L-LED Green logic probes
Set the switches Note the state of
H—Red LED the output of the JouT=. jOUT=
L-LED Green logic probes
Set the switches Note the state of
JA=L—Green LED the output of the |OUT= louT=
B=H- Red LED logic probes
[Set the switches Note the state of
/A=H-—Red LED the output of the |OUT=
B=H-=Red LED logic probes
SWITCH OFF THE MACHINE, disconnect the connections and return the switches to position “L”
Check on the effective equality of the two logic circuits implemented
CONCLUSIONS: were the equivalencies of the circuits derived from the two De Morgan's Laws
verified?
ver 220120307DE LORENZO DL 2203SR
TEST N°4
FUNCTIONAL CHECK OF THE MULTIPLEXER
Establish the test circuit
wv
1. connect pin A of the switch with pin A of the MUX
2. connect pin B of the switch with pin B of the MUX
3. connect pin C of the switch with pin G of the MUX
subsequently connect the inputs as follows
connect pin C0 of the MUX with a fixed power at SV
connect pin C1 of the MUX with GND fixed mass
connect pin C2 of the MUX with pin D of the switch
connect pin C3 of the MUX with the PULSE pin of the impulse generator. This will be
regulated with the potenziometer over to the right (minimum frequency of 1 Hz) and with
the enabling switch over to the right.
5. connect output Y of the MUX with an input of the logic probe
ayRe
ver 220120007 15DL 2203SR
DELORENZO
SWITCH ON THE MACHINE by pressing the ON/OFF button
check on the status of the outputs according to the table
switch
ed
clalB ACTIONS RESULTS
tele Check on the output of the logic probe
ciel Check on the output of the logic probe
L | HL | Manually change the D switch oa check the output of the logic
probe
LlH]H Check on the output of the logic probe
H[t[t Check on the output of the logic probe
H[L[H Check on the output of the logic probe
H | HL | Manually change the D switch and check the output of the logic
probe
H[H[H Check on the output of the logic probe
CONCLUSIONS: what is the function of a MUX?
what function does the G pin of the MUX have,
activated?
and in what state does this function become
ver 220120307DE LORENZO DL 2203SR
TEST N%
FUNCTIONAL CHECK OF A DECODER-DEMULTIPLEXER
Establish the test circuit
BA xt x2 x3 x4
ty
u1A
24m avo be —{—,—}4
: oR
1x2 |o8. =
a ac 1 bt 2
74HC139N_4V
connect pin A of the switch with pin A of the DMUX
connect pin B of the switch with pin B of the DMUX
connect pin GI to a GND mass
connect the pins to output YO ... Y3 of the DMUX to the inputs INI ... IN4 of the logic
probes
aes
5. the following connection is obtained
ver 920120307 1cirsspea DELORENZO
SWITCH ON THE MACHINE by pressing the ON/OFF button
note the outputs according to the table
Set the switches Note the state of
|A=L - Green LED the output of the = |OUT=__
B=L-LED Green logic probes
[Set the switches Note the state of
A the output ofthe = |OUT=__
logic probes
[Set the switches Note the state of
|A=L- Green LED the output of the |OUT=
B=H~Red LED logic probes
Set the switches Note the state of
—Red LED the output of the — |OUT=,
B=H-Red LED logic probes
Repeat the experiment by connecting G of the DMUX to a +5V power supply
The following connection is obtained:
ver 220120307DE LORENZO
DL 2203SR
SWITCH ON THE MACHINE by pressing the ON/OFF button
note the outputs according to the table
Set the switches Note the state of
A=L-Green LED the output ofthe |OUT=__
B=L-LED Green logic probes
‘Set the switches Note the state of
A=H—Red LED the output of the (OUT=__
B=L-LED Green logic probes
Set the switches Note the state of
A=L-GreenLED the outputof the |OUT=__
—Red LED logic probes
‘Set the switches Note the state of
H—Red LED the output of the |OUT=
logic probes
CONCLUSIONS: what is THE function of the D-MUX?
what function is carried out in pin G and on what logical state does this function activate?
ver 220120307DE LORENZO DL 2203SR
TEST N°7
FUNCTIONAL CHECK ON 7-SEGMENT DISPLAY WITH BINARY DECODING
|. connect pin IN VCC of the display group to a +SV power supply
connect pin A of the switch with pin A of the first display
|. connect pin B of the switch with pin B of the first display
. connect pin C of the switch with pin C of the first display
connect pin D of the switch with pin D of the first display
‘The following connection is obtained
SWITCH ON THE MACHINE by pressing the ON/OFF button
note the value on the display according to the inputs, as per the table
switches switches
B number B
number
clele|[r|ej[e|e|elo
z|z/z|z|-|F|r|-lo
xf{e|xzje|zfe}z[rj>
x}x/x/x|z/z}/z/z]o
zl{z}eje|z{zie|e
x/x/z|z/-|r-|-|r-jo
x]z/rj-|z}z}r|n
x|{e|x|-|z|-|z}-|>
vver 220120307
25pe DE LORENZO
CONCLUSIONS: what is the function of the display?
26
ver a20120307DE LORENZO
DL 2203SR
TEST N°9
FUNCTIONAL CHECK OF A FOUR-BIT ADDER
Establish the test circuit
u3 U4
ocea
eae
‘|
Blo ut Tt
Ls eile ue
5 =
13 a 7
aac
"21149.
Tea
wm
‘connect pin A of the switch with pin AO of the first adder
connect pin B of the switch with pin A1 of the first adder
connect pin C of the switch with pin A2 of the first adder
connect pin D of the switch with pin A3 of the first adder
aeNe
‘The connection is obtained
subsequently, proceed to the connection of the second group of bits according to the diagram:
connect pin I of the switch with pin BO of the first adder
connect pin L of the switch with pin BI of the first adder
connect pin M of the switch with pin B2 of the first adder
connect pin N of the switch with pin B3 of the first adder
Pray
ver 220120307 29DL 2203sR DELORENZO
‘The connection is obtained
subsequently connect the adder with the display group
9. connect pin SO of the adder with pin A of the second display
10. connect pin S1 of the adder with pin B of the second display
11. connect pin S2 of the adder with pin C of the second display
12. connect pin $3 of the adder with pin D of the second display
13. connect pin C4 of the adder with pin A of the first display
14.connect pin IN VCC of the display to a +5V power supply
the connection is obtained
30 ‘ver 2201203070
a DE LORENZO DL 2203SR
Note the values expressed on the display, according to the table
Values of first bit group | Values of second bit group | Hexadecimal
(A) (B) value displayed
Di cle | a [Nn | wie ti
L L L L L L L L
Bo et see eee
Paw ewe le be
Heo LE |e ale ion i
Gtr nee ann
[ae
Hi[efeftutefetelu
H[>_uf[ufuotuluatautu
N.B. THE VALUE DISPLAYED IS EXPRESSED IN HEXADECIMAL AND NOT DECIMAL
CODE, Carry out the appropriate decoding to verify the table.
CONCLUSIONS
Check the precision of the sums obtained.
‘What function is carried out by the adder?
What function is carried out by the CO pin of the adder?
ver 220120007 31