Copprint NPdb is a red-brown conductive paste containing copper filler particles that provides anti-microbial and anti-bacterial properties. It can be used in various applications. The paste has a particle size distribution between 10-400nm and contains over 60% copper. It should be stored between 4-30°C and has a shelf life of 180 days.
Copprint NPdb is a red-brown conductive paste containing copper filler particles that provides anti-microbial and anti-bacterial properties. It can be used in various applications. The paste has a particle size distribution between 10-400nm and contains over 60% copper. It should be stored between 4-30°C and has a shelf life of 180 days.
Copprint NPdb is a red-brown conductive paste containing copper filler particles that provides anti-microbial and anti-bacterial properties. It can be used in various applications. The paste has a particle size distribution between 10-400nm and contains over 60% copper. It should be stored between 4-30°C and has a shelf life of 180 days.
Copprint NPdb provides the following product characteristics: For safe handling information on this product, consult the Safety Appearance Red to brown Data Sheet, (SDS). Filler Type Copper Product Benefits ● Anti-microbial DIRECTIONS FOR USE ● Anti-bacterial Preparation guidelines ● High conductivity 1. Copprint NPdb is supplied as a paste of particles dispersed in a solvent (Dowanol DB CAS# 112-34-5). 2. Mix the paste prior using. Application Anti-microbial materials Conductive paste Copprint NPdb is an anti-microbial additive for various applications. CLEAN-UP The equipment can be cleaned with Dowanol DB followed by water. TYPICAL PROPERTIES OF UNCURED MATERIAL Particle Size distribution, D10< 20nm, D50<120nm, D90<400nm STORAGE: Solids Content, after 30 minutes @ 150ºC, % > 78 Store product in a tightly closed container at temperature of 4-30oC. Copper content, % > 60 Open the container carefully. Density, g/ml > 2.2 Optimal Storage: 4-30°C. Shelf Life @ room temperature, days 180 Material removed from containers may be contaminated during use. Do Flash Point - See SDS not return product to the original container. Copprint cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Not for product specifications
The technical data contained herein are intended as reference only