This document contains a science test for students with multiple choice and short answer questions about phase changes of matter such as boiling points, vapor pressure, heat of vaporization, and liquid crystals. There are 6 multiple choice questions about the boiling point of water at high altitudes, liquids with different vapor pressures, substances with different boiling points, and the relationship between evaporation and condensation rates at equilibrium. There are also short answer questions defining vapor pressure and factors affecting it, boiling points and why the temperature remains constant, uses of vacuum distillation, why the heat of sublimation of iodine is high, and why molar heat of vaporization is greater than heat of fusion. The final question asks students to define liquid crystals
This document contains a science test for students with multiple choice and short answer questions about phase changes of matter such as boiling points, vapor pressure, heat of vaporization, and liquid crystals. There are 6 multiple choice questions about the boiling point of water at high altitudes, liquids with different vapor pressures, substances with different boiling points, and the relationship between evaporation and condensation rates at equilibrium. There are also short answer questions defining vapor pressure and factors affecting it, boiling points and why the temperature remains constant, uses of vacuum distillation, why the heat of sublimation of iodine is high, and why molar heat of vaporization is greater than heat of fusion. The final question asks students to define liquid crystals
This document contains a science test for students with multiple choice and short answer questions about phase changes of matter such as boiling points, vapor pressure, heat of vaporization, and liquid crystals. There are 6 multiple choice questions about the boiling point of water at high altitudes, liquids with different vapor pressures, substances with different boiling points, and the relationship between evaporation and condensation rates at equilibrium. There are also short answer questions defining vapor pressure and factors affecting it, boiling points and why the temperature remains constant, uses of vacuum distillation, why the heat of sublimation of iodine is high, and why molar heat of vaporization is greater than heat of fusion. The final question asks students to define liquid crystals
1:- boiling point of water at top of the mount Everest is
(a)59oC(b) 69oC (c) 83oC (d) 75oC 2:-which of the following liquid has lowest vapour pressure at 25oC (a)water(b)Ethanol(c)Ethylene glycol(d)Ether 3:- which of the following has highest boiling point (a)HCl (b)HBr (c)H2O(d)Br2 4:-At equilibrium rate of evaporation and rate of condensation a. Become very high b. Become very low c. Can never be equal d. Become equal 5:- Molar heat of vaporization of water is a. 140.6 kj/mol b. 14.06 kJ/mol c. 18 kJ/ mol d. 40.6 kJ/mol 6:- Water may boil at 1200C when external pressure is a.760 torr b.100 torr c.1489 torr d.400 torr Q#2:- Give short answer to the followings (i)define vapour pressure,what are the two factors effecting vapour pressure?(ii)define boiling point,why temperature of liquid remains constant at its boiling point?(iii)what is the importance of vacuum distillation?(iv)why heat of sublimation of iodine is very high(v)Why molar heat of vapourization is greater than Molar heat of fussion? Q#3:- Define liquid crystal also write its uses in daily life? (4)
STAR SCIENCE ACADEMY Name________________________
1:- boiling point of water at top of the mount Everest is (a)59oC(b) 69oC (c) 83oC (d) 75oC 2:-which of the following liquid has lowest vapour pressure at 25oC (a)water(b)Ethanol(c)Ethylene glycol(d)Ether 3:- which of the following has highest boiling point (a)HCl (b)HBr (c)H2O(d)Br2 4:-At equilibrium rate of evaporation and rate of condensation a. Become very high b. Become very low c. Can never be equal d. Become equal 5:- Molar heat of vaporization of water is a. 140.6 kj/mol b. 14.06 kJ/mol c. 18 kJ/ mol d. 40.6 kJ/mol 6:- Water may boil at 1200C when external pressure is a.760 torr b.100 torr c.1489 torr d.400 torr Q#2:- Give short answer to the followings (i)define vapour pressure,what are the two factors effecting vapour pressure?(ii)define boiling point,why temperature of liquid remains constant at its boiling point?(iii)what is the importance of vacuum distillation?(iv)why heat of sublimation of iodine is very high(v)Why molar heat of vapourization is greater than Molar heat of fussion? Q#3:- Define liquid crystal also write its uses in daily life? (4)
STAR SCIENCE ACADEMY Name________________________
1:- boiling point of water at top of the mount Everest is (a)59oC(b) 69oC (c) 83oC (d) 75oC 2:-which of the following liquid has lowest vapour pressure at 25oC (a)water(b)Ethanol(c)Ethylene glycol(d)Ether 3:- which of the following has highest boiling point (a)HCl (b)HBr (c)H2O(d)Br2 4:-At equilibrium rate of evaporation and rate of condensation a. Become very high b. Become very low c. Can never be equal d. Become equal 5:- Molar heat of vaporization of water is a. 140.6 kj/mol b. 14.06 kJ/mol c. 18 kJ/ mol d. 40.6 kJ/mol 6:- Water may boil at 1200C when external pressure is a.760 torr b.100 torr c.1489 torr d.400 torr Q#2:- Give short answer to the followings (i)define vapour pressure,what are the two factors effecting vapour pressure?(ii)define boiling point,why temperature of liquid remains constant at its boiling point?(iii)what is the importance of vacuum distillation?(iv)why heat of sublimation of iodine is very high(v)Why molar heat of vapourization is greater than Molar heat of fussion? Q#3:- Define liquid crystal also write its uses in daily life? (4)
STAR SCIENCE ACADEMY Name________________________
1:- boiling point of water at top of the mount Everest is (a)59oC(b) 69oC (c) 83oC (d) 75oC 2:-which of the following liquid has lowest vapour pressure at 25oC (a)water(b)Ethanol(c)Ethylene glycol(d)Ether 3:- which of the following has highest boiling point (a)HCl (b)HBr (c)H2O(d)Br2 4:-At equilibrium rate of evaporation and rate of condensation a. Become very high b. Become very low c. Can never be equal d. Become equal 5:- Molar heat of vaporization of water is a. 140.6 kj/mol b. 14.06 kJ/mol c. 18 kJ/ mol d. 40.6 kJ/mol 6:- Water may boil at 1200C when external pressure is a.760 torr b.100 torr c.1489 torr d.400 torr Q#2:- Give short answer to the followings (i)define vapour pressure,what are the two factors effecting vapour pressure?(ii)define boiling point,why temperature of liquid remains constant at its boiling point?(iii)what is the importance of vacuum distillation?(iv)why heat of sublimation of iodine is very high(v)Why molar heat of vapourization is greater than Molar heat of fussion? Q#3:- Define liquid crystal also write its uses in daily life? (4)