|.FHD Optical Lens 7, Anti-theft Alarm Button
Doorbell
Please shor press the doorbell button to
1
2. PIR Motion sensor 8, Reset key esos | Reece
3. Microphone 9. USB charge port Press and hold RESET for 5 seconds to reset
oie ee Reset Key | the device. You vil hear‘Bugu sound from
he device reset successful
5. Doorbell Button 11.Charging indicator wd ai ny,
6. Safety Screw 12. Speaker MicroSD | Support local SD card storage
: . Card Sit | (menu up 012
Product Overview -- Wireless Chime : hes)
Charging | Red: Charging
indeator | Blue: Full charged
Sold one: Devices abnormal
Fusing e stony Ready for WF connection
LED Indicator | Fiashing red quickly: WiFi connecting
Sols on be Wi connected svcessly
Microphone | Capture sound for your videos
pir sensor | can detect moving objects upto SOFT away
Speaker | Two-way audio output
4. Battery Slots
charge | US SV2AUS® standard charger (not =
Hom Usecage | sandoand mero USB cable tocarge the
camera
combined network into two separated networks.
Step 1; Go to the router's 'Wireless network settings’
age.
Step 2: Find the 2.4Ghz settings page, change the
WiFi name (SSID) to "xx-2.4g', and save the settings,
Step 3: Find the SGhz settings page, change the WiFi
name (SSID) to 'XX-SGI, and save the settings.
Step 4: After the name changed, you can find
"'XX-2.4G' and 'XX-5G' respectively in the WiFi search,
page of the phone.
Wireless Chime Connection
1, Power on the wireless chime
Please remove the AAA battery protective film first
and mount the batteries in the correct direction per
‘the positive and negative marks on the slot of the
wireless chime. (The model of the battery in the
wireless chime is the AAA battery, you can easily get
the replacement from the market ifthe provided one
is dead.)
2. Long press the Connection/Volume Button, the
indicator light will flashes blue, which means that the
wireless chime is ready to