Transformer Specification for 300 KVA Oil immersed Type
Technical Particulars
Kuwait Rating in KVA
IECIBSS Rating in KVA
Phases
Cooling Method
Primary Voltage
Tapping on HV
1
2
3
4 Frequency Hz
5.
6
‘Secondary Voltage (Vols)
8 Primary Connection
8 ‘Secondary Connection
10, Vector Group
11. Insulation Level
12, Temperature Rise Top oil
Average Winding
13, Reference Standard
14. Impedance
eral Particulars
) Transformer Type
2) Instatiation
3) Cooler Type
4) Winding Conductor
5) Painting
Terminations
Primany
300
375
3
SoH
ONAN
3300 (DELTA)
+45% t0-5% in 2.5% steps (5 positon) through
Off circuit tap changer for HV variation
436 vols (Star) AT NO LOAD
DELTA
STAR
Dyntt
Primary LI 10 AC-40
Secondary: LI —~ AC3
35°C
45°C
ec 60076
5.0 % subject to IEC tolerance
Breathing type with conservator
‘Outdoor ~ Ground Mounted
Pressed Steel Radiators
Copper
Epoxy based paint (Paint rsh RAL 9008)
Air Insulated Cable box:
2), Secondary : Air insulated cable box
Note: Lugs, Glands and Heat termination kitis notin our soope of supply‘Transformer Specification for 300 KVA Oil immersed Type
Accessories & Fittings
1)
2)
3)
4)
§)
8)
1)
8)
9
10)
11)
12)
13)
14)
15)
Rating & Diagram Prate
2Nos, Earthing Terminals
4 Nos. Lifting Lugs
Under base
Plain Oillevel gauge
DMR (CISD) with cage
Dial ype ol temperature indicator with maximum reading pointer with contacts with cage
Pressure Relief Device with contact
‘Thermometer Pocket
Oi filing valve with plug
Oil Drain Valve with plug
Jacking lugs
5 position Off circuit tap changer
Terminal Box
Conservator with silica gel Breather
Approximate Overall Dimensions and mass:
Height
Length
width
Total Mass
Oil Mass
+200 mm
+400 mm
41600 mim
4700 Kg
270 Ko.
-Weights and dimensions are approximate and are subject to change in the finel design without
affecting the guaranteed performance.