Professional Documents
Culture Documents
Brochure
Brochure
Catalogue
VOHRA AUTO
DISTRIBUTORS
PVT. LTD.
SPS AUTOMOTIVE
COMPONENTS
310mm (12 inch) Cover Assembly
Application
Make Model Part Number OEM Cross Remarks
Specification Reference
•PCD 345mm. TATA 613,713, 310-701-L4465R 2524 2540 0160
•8nos. Mounting bolts of size M8X20 1109 BS
•Mounting bolt torque 5mkg. II
•Clamping load 1170 kg EICHER 1110 310-701-L4504R ID 318041
COMPETITIVE EDGE: Ashok ECOMET 310-701-L4521R B1303715
•Stronger Diaphragm with 24 fingers – gives easy Leyland
disengagement
•Original equipment to Tata Motors, Ashok Leyland,
Eicher
310mm (12inch) Cover Assembly
Special Feature Advantage/ Benefit
Push type Clutch Cover - No Frequent Release bearing travel adjustment required
Assembly - It is self-adjusting .
- A “ Fit & Forget” design.
Coil Spring Design - Easy to repair & overhaul
- Low repair costs
- Most ideal & favorite of Indian market
Forged release levers - Stronger design
- Results in low pedal effort & longer life.
Release levers & eyebolts - Less pedal effort
supported on needle - Longer life of CA assembly.
rollers - It results in smooth & easy clutch disengagement
All LIPE clutches are - It results in low vibrations & smooth running
dynamically - Increases life of clutch & gearbox
Specifications balanced
• PCD dia 345 mm
• Mounting bolt Torque : 5.4 Kgm
• Mounting Bolt size : M8 x50
• Clamp Load : 720 Kg Application
Make Mode Part Number OEM Cross Reference Remarks
COMPETITIVE EDGE: l
TATA 1210 310-061-L4482R GB40
• Stronger forged lever.
• Use of needle rollers
• Original TATA design
310mm (12 inch) Disc Assembly
Application
Specifications
• Valeo F510 Friction Linning
• Free Thickness of Friction Linning : 11.6 mm Make Model Part Number OEM Cross Reference Remarks
• Rated torque: 79 Kgm TATA 613,713,1 310-019- 2724 2520 0165 GB40
•Hub: 1.5” x 10 (AL)
28 x 35 X 4 in mm (Tata / Eicher)
109 BS II L4713R
EICHER 1110 310-019- ID 318042
COMPETITIVE EDGE: L4503R
Ashok Leyland ECOMET 310-019- B1303716
• Damper springs are not preloaded. Less structural L4520R
damage, longer life of clutch disc.
• Original equipment to Tata Motors, Ashok
Leyland, Volvo-Eicher Commercial vehicles
330mm (13inch) Cover Assembly
Special Feature Advantage/ Benefit
Push type Clutch Cover - No Frequent Release bearing travel adjustment required
Assembly - It is self-adjusting .
- A “ Fit & Forget” design.
Coil Spring Design - Easy to repair & overhaul
- Low repair costs
- Most ideal & favorite of Indian market
Collector – Ring provided - Release bearing contact with flat collector ring
prevents grooving of the release bearing.
- It also increases release bearing life.
Specifications All LIPE clutches are - It results in low vibrations & smooth running
• PCD dia 345 mm dynamically - Increases life of clutch & gearbox
• Mounting bolt Torque : 5.4 Kgm balanced
• Mounting Bolt size : M8 x50
• Clamp Load : 1270 Kg Application
Make Model Part Number OEM Cross Reference Remarks
COMPETITIVE EDGE: TATA 1510,151 330-061- 2724 2540 0138 GB40
2,1613- L4001R
• Formed Sheet metal lever much stronger and (BSII)
lighter than forged lever.
• Collector ring enhances bearing life EICHER 20.15,20. 310-061- ID 315672
• Use of needle roller bearing than bushes 16 L4622R
• Original equipment to Tata Motors, Volvo-Eicher.
330mm (13inch) Cover Assembly(Sheet
Metal)
Special Feature Advantage/ Benefit
Push type Clutch Cover - No Frequent Release bearing travel adjustment required
Assembly - It is self-adjusting .
- A “ Fit & Forget” design.
- Sheet metal cover so lighter in weight
- Due to sheet metal cover less inertia & less load on gearbox
- Heat dissipation is faster due to sheet metal cover
Coil Spring Design - Easy to repair & overhaul
- Low repair costs
- Most ideal & favorite of Indian market
Collector – Ring provided - Release bearing contact with flat collector ring
prevents grooving of the release bearing.
- It also increases release bearing life.
• Formed Sheet metal lever much stronger and Make Model Part Number OEM Cross Remarks
lighter than forged lever. 330-061-L4328R Reference
2724 2540 0167
• Collector ring enhances bearing life TATA 1510,1512,1613 GB40
• Use of needle roller bearing than bushes -(BSII)
• Original equipment to Tata Motors, Volvo-
Eicher.
330mm (13 inch) Disc Assembly
Special Feature Advantage/ Benefit
APPLICATION
Specifications
• Valeo F510 Friction Linning,Thickness 4 mm Each
• Hub: 28 X 35 X 10 Make Model Part Number OEM Cross Reference Remarks
• Rated Torque : 106 Kgm TATA 1512,1613, 330-009- 2724 2520 0151 GB40
•Total frictional area:968 sq.cm
1109(y1), L4264R
909(y1)
COMPETITIVE EDGE:
All LIPE clutches are - It results in low vibrations & smooth running
dynamically - Increases life of clutch & gearbox
Specifications balanced
• PCD dia mm
• Mounting bolt Torque : 5.4 Kgm
• Mounting Bolt size : 3/8” X 18 mm APPLICATION
• Clamp Load : 1420 Kg
Make Model Part Number OEM Cross Reference Remarks
COMPETITIVE EDGE: TATA 2515,2516,30 140-701-L1717R 2752 2540 0105 GB600
15,3516,4018
• Formed Sheet metal lever much stronger and (BSII)
lighter than forged lever.
• Collector ring enhances bearing life EICHER 30.25,33.25,3 310-701-L2542 ID 206097
• Use of needle roller bearing than bushes 5.31
• Original equipment to Tata Motors, Volvo-Eicher.
352mm (14 inch) Disc Assembly
Special Feature Advantage/ Benefit
APPLICATION
Specifications
• Valeo F510 MCC Friction Linning
• Total frictional area: 1290 cm sq
Make Model Part Number OEM Cross Reference Remarks
• Hub: 1.75 x 10
• Rated Torque : 132Kgm TATA 1613 BSIV 140-009-L3244R 581225200101
I
EICHER TERRA 16
COMPETITIVE EDGE:
COMPETIIVE EDGE:
• Damper springs are not preloaded. Less
structural damage, longer life of clutch
disc.
• Original Lipe Design
•Advantage of Cushions with ceramic buttons
380mm (15 inch) Cover Assembly
Special Feature Advantage/ Benefit
Push type Clutch Cover - No Frequent Release bearing travel adjustment required
Assembly - It is self-adjusting .
- A “ Fit & Forget” design.
Coil Spring Design - Easy to repair & overhaul
- Low repair costs
- Most ideal & favorite of Indian market
Collector – Ring provided - Release bearing contact with flat collector ring
prevents grooving of the release bearing.
- It also increases release bearing life.
• PCD dia 410 mm All LIPE clutches are - It results in low vibrations & smooth running
• Mounting bolt Torque : 6.3 Kgm dynamically - Increases life of clutch & gearbox
• Clamp Load : 1946 Kg balanced
APPLICATION
COMPETITIVE EDGE: Make Model Part Number OEM Cross Reference Remarks
TATA 2518,4018,31 380-061-L2770R 2724 2540 0129
• Formed Sheet metal lever much stronger and 18,4923
lighter than forged lever. EICHER TERRA 25 380-061-L4008R ID 209719
• Collector ring enhances bearing life
AMW 4923,2518,40 380-061-L4188R 293 01 0012
• Use of needle roller bearing than bushes
• Original equipment to Tata Motors, Volvo-Eicher. 18,2523
380mm (15 inch) Disc Assembly
APPLICATION
Specifications
• Valeo F510 MCC Friction Linning
• Total frictional area: 1499 cm sq
Make Model Part Number OEM Cross Reference Remarks
• Hub: 1.75 x 10
• Rated Torque : 157 Kgm TATA 2518,4018, 380-009-L2771R 2724 2520 0134
3118,4923
COMPETITIVE EDGE:
COMPETIIVE EDGE: Make Model Part Number OEM Cross Reference Remarks
EICHER TERRA 25 380-009-L4346R ID 209718
• Damper springs are not preloaded. Less structural AMW 4923,2518, 380-009-L4187R 292 02 0006
damage, longer life of clutch disc. 4018,2523
• Original Lipe Design
ALL 2518,3518, 140-009-L2328R B1304301
• Original equipment to Tata Motors,, AMW, Ashok
Leyland 3116
380 mm (15 inch) Clutch Disc-Cushion
Ceramic
Special Feature Advantages / Benefits
Ceramic facings with cushion - Gives smooth gear engagement
segment - Improves life of gear box
- Advantages of ceramic disc with cushion effect
- Operates under high temrpature
- Less slippage
Clutch disc hub splines through - Less wear & longer life of disc & gearbox drive shaft splines.
hardened
Fan/Paddle type construction of - Lighter in weight
clutch disc - Better heat dissipation hence Longer life
Damper springs not preloaded - Less structural damages
- Longer life of disc
- Prevents damages to retainer plates
Tested in house for 50 lakh cycles - Longer defect free life cycle
at 150°C Temperature.
Dynamically balanced up to 2gms - Gives smooth running due to less vibrations
- Reduces wear & tear of clutch & gearbox components.
Specifications
• MIBA friction button thicness 4.6 to 6.10 mm each APPLICATION
• Total friction area : 464 sq cm
• Rated torque: 157 Kgm
Make Model Part Number OEM Cross Reference Remarks
• Hub: 1.75” x 10
TML 2518,3118 380-009-L4701R 2724 2520 0186
COMPETIIVE EDGE:
• Damper springs are not preloaded. Less
structural damage, longer life of clutch
disc.
• Original Lipe Design
•Advantage of Cushions with ceramic buttons
• Original equipment to Tata Motors
395 mm Cover Assembly
APPLICATION
Specification
•PCD 410 mm.
Make Model Part Number OEM Cross Reference Remarks
•8nos. Mounting bolts of size
BHARAT 2523,3128, 395-701-L4431R A 400 250 00 04
•Mounting bolt torque mkg.
BENZ 2518
•Clamping load 2151kgs.
COMPETITIVE EDGE:
•Stronger Diaphragm with 24 fingers – gives easy
disengagement
•Original equipment to Tata Motors, Ashok Leyland,
Eicher
395 mm Disc Assembly
Specifications
• Valeo F510 MCC Friction Linning APPLICATION
• Total frictional area: 1460 cm sq
• Hub: DIN 5480
• Rated Torque : 1870NM
Make Model Part Number OEM Cross Reference Remarks
BHARAT 2523,3128, 395-019-L4430R A 400 250 00 03
COMPETITIVE EDGE: BENZ 2518
Specifications APPLICATION
• PCD dia 450 mm
• Mounting bolt Torque : 6.3 Kgm Make Model Part Number OEM2540
5805 Cross0108
Reference Remarks
• Clamp Load : 2900 Kg TML 4028,4023, 430-701-L4160R
3128,2528
COMPETITIVE EDGE: TML 3138 430-701-L4037R 5850 2540 0101
Specifications
• Valeo F510 MCC Friction Linning APPLICATION
• Total frictional area: 1870 cm sq
• Hub: 18 splines(DIN),2”(10 spline),1.75”(10 spline)
Make Model Part Number OEM2520
5805 Cross0108
Reference Remarks
• Max Rated Torque : 2780NM
TML 4028,4023, 430-019-L4205R
3128,2528
COMPETITIVE EDGE: TML 3138 430-701-L4159R 5850 2520 0101
All LIPE clutches are - It results in low vibrations & smooth running
dynamically - Increases life of clutch & gearbox
balanced
Specifications Twin Clutch Plates with - Designed considering severity of operations in field
damper springs not - Gives longer clutch life
• PCD dia 410 mm preloaded - Damage to retainer plate prevented
• Mounting bolt Torque : 6.3 Kgm
• Clamp Load : 1946 Kg
APPLICATION
Make Model Part Number OEM Cross Reference Remarks
COMPETITIVE EDGE:
LP- 108935-91
L2851AK-018Z(LIP
• Formed Sheet metal lever much stronger and E 1)
lighter than forged lever. LP- 109701-74
• Use of needle roller bearing than bushes L2851AK-018Z(LIP
E 2)
• Ease of Rbrg adjustment
330mm (13 inch) Release Lever Kit
Special Feature Advantage/ Benefit
Unique Sheet metal release - Lighter but stronger design
levers - Results in low pedal effort & longer life.
Release levers & eyebolts - Less pedal effort
supported on needle roller - Longer life of CA assembly.
bearings. - It results in smooth & easy clutch disengagement
APPLICATION
Make Model Part Number OEM Cross Reference Remarks
Specifications TML 1510,1512 AKN-L2316R 2724 2540 0109
EML 20.15,20.1 AKN-L2316R ID 206174
6,Terra 16
COMPETITIVE EDGE:
Specifications
APPLICATION
COMPETITIVE EDGE: Make Model Part Number OEM Cross Reference Remarks
TML 1510,1512 AKN-L1898R 2724 2540 8704
• Original equipment to Tata Motors, Volvo- EML 20.15,20.1 AKN-L1898R ID 206170
Eicher. 6,Terra 16
•Fully lab tested then used to suit various field
conditions.
330mm (13 inch) Eye Bolt Kit
Special Feature Advantage/ Benefit
Unique Sheet metal release - Lighter but stronger design
levers - Results in low pedal effort & longer life.
Release levers & eyebolts - Less pedal effort
supported on needle roller - Longer life of CA assembly.
bearings. - It results in smooth & easy clutch disengagement
Specifications
APPLICATION
COMPETITIVE EDGE: Make Model Part Number OEM Cross Reference Remarks
TML 1510,1512 AKN-L3217R 2724 2540 0112
• Child parts manufactured as per standard EML 20.15,20.1 AKN-L3217R ID 206167
specifications 6,Terra 16
• Use of needle roller bearing than bushes
• Original equipment to Tata Motors, Volvo-
Eicher.
330mm (13 inch) Pressure Plate Kit
Special Feature Advantage/ Benefit
Dynamically balanced - This will increase gearbox life & less vibration
Sufficient mass of pressure - This enhances good heat dissipation hence prolongs the life of
plate clutch.
Specifications
APPLICATION
COMPETITIVE EDGE: Make Model Part Number OEM Cross Reference Remarks
TML 1510,1512 AKN-L1897R 2724 2540 0109
• Use of needle roller bearing than bushes EML 20.15,20.1 AKN-L1897R ID 206173
•Enough mass of pressure plate to dissipate 6,Terra 16
heat generated during operation
• Original equipment to Tata Motors, Volvo-
Eicher.
352mm (14 inch) Release Lever Kit
Special Feature Advantage/ Benefit
Unique Sheet metal release - Lighter but stronger design
levers - Results in low pedal effort & longer life.
Release levers & eyebolts - Less pedal effort
supported on needle roller - Longer life of CA assembly.
bearings. - It results in smooth & easy clutch disengagement
Specifications
APPLICATION
COMPETITIVE EDGE: Make Model Part Number OEM Cross Reference Remarks
TML 2516,3015 AKN-L1904R 2754 2540 0110
• Formed Sheet metal lever much stronger and EML GALAXY AKN-L1904R ID 206040
lighter than forged lever. 30.25
• Use of needle roller bearing than bushes
• Original equipment to Tata Motors, Volvo-
Eicher.
352 mm (14 inch) Spring Kit
Special Feature Advantage/ Benefit
Tested load of the - Provide required clamp load for the torque
springs transmission efficiently
Specifications
APPLICATION
COMPETITIVE EDGE: Make Model Part Number OEM Cross Reference Remarks
TML 2516,3015 AKN-L1905R 2754 2540 0111
• Original equipment to Tata Motors, Volvo- EML GALAXY AKN-L1905R ID 206041
Eicher. 30.25
• Fully lab tested then qualified for use
352 mm (14 inch) Eye Bolt Kit
Special Feature Advantage/ Benefit
Eyebolts supported - Less pedal effort
on needle roller - Longer life of CA assembly.
bearings. - It results in smooth & easy clutch disengagement
Specifications
APPLICATION
COMPETITIVE EDGE: Make Model Part Number OEM Cross Reference Remarks
TML 1510,1512 AKN-L1901R 2754 2540 0115
• In house manufactured child parts as per EML GALAXY AKN-L1901R ID 206044
specifications 30.25
• Use of needle roller bearing than bushes
• Original equipment to Tata Motors, Volvo-
Eicher.
352mm (14 inch) Pressure Plate Kit
Special Feature Advantage/ Benefit
Dynamically balanced - This will increase gearbox life & less vibration
Sufficient mass of pressure - This enhances good heat dissipation hence prolongs the life of
plate clutch.
Specifications
APPLICATION
COMPETITIVE EDGE: Make Model Part Number OEM Cross Reference Remarks
TML 2515,3015 AKN-L1900R 2754 2540 0114
• Use of needle roller bearing than bushes EML GALAXY AKN-L1900R ID 206043
•Enough mass of pressure plate to dissipate 30.25
heat generated during operation
• Original equipment to Tata Motors, Volvo-
Eicher.
352mm (14 inch) Release Bearing Assembly(1.75”)
Specifications
• Distance between two locknuts: 31.5 mm (New
Clutch Disc Condition)
• Distance between two locknuts:47 mm(Clutch disc APPLICATION
worn out)
Make Model Part Number OEM Cross Remarks
COMPETITIVE EDGE: AC083-L4481R Reference
TATA 2515,2516,3015 2752 2540 0110
•Easy adjustment of clutch release bearing ,3516,4018
• Clutch disc wear can be checked easily
(BSII) AC083-L4481R
• Self lubricating bush ensures proper greasing
of drive shaft EICHER 30.25,33.25,35. ID 305172
•Special tool kit set for adjustment of Rbrg 31
352mm (14 inch) Release Bearing Assembly(1.5”)
Specifications
• Distance between two locknuts: 31.5 mm (New
Clutch Disc Condition)
• Distance between two locknuts:47 mm(Clutch disc APPLICATION
worn out)
Make Model Part Number OEM Cross Reference Remarks
AC083-L1690R
COMPETITIVE EDGE: TATA 2515,1615 AC083-L1690R 2754 2540 0118
EICHER 30.25 ID 205837
•Easy adjustment of clutch release bearing
• Clutch disc wear can be checked easily
• Self lubricating bush ensures better life
•Special tool kit set for adjustment of Rbrg