Professional Documents
Culture Documents
Fitup & WV For Flash Tanks Nibr
Fitup & WV For Flash Tanks Nibr
Name of Client: M/s RUNGTA MINES LIMITED KAMANDA Report No:RML/SL/TEE-DR-0283 Date:
ISO/ Line Number:62OP42504-U1-6730102096-41 Piping Class:CARBON STEEL (CS) Service:STEAM Pre‐Heat Temperature: 10 0C (Min)
Equipment Number: ATM FLASH TANK DRAIN HEADER Equipment Drawing Number: Inter Pass Temperature: 150 0C (Max)
Temporary
Heat Number Type Of Thickness Dimensional & WPS Root W/V attachment Final Weld
Sr No. Matcode/Spool No. (Note-1) Joint No. Joint Size (NB) (mm) Allignment FITUP CHECK Fit-up Date Number Welder Number (Note:7) NDT Visual Final WV Date
Check
(Note-5)
Note :- 1. For LTCS/ NACE/ IBR Material Heat Number shall be recorded . 2. For LAS/ SS/ Non- Ferrous material,upon satisfactory PMI,QMD engineer shall sign . 3. In Case of LTCS and NACE welding consumables batch number shall be recorded. 4. During LTCS welding heat input shall be monitored & recorded in Remarks. 5. Up o
temporary attachment area,QMD engineer shall sign. 6. Internal Cleaning to be checked as per format No: EPCMD-2-QMOO-FMT-PP-011. 7. Before starting 2nd run welding, root weld visual must be cleared for socket weld, any joint for compressor suction line, major pumps, internally lined pipes, lube oil and control oil lines, sulfuric ac
Name
Date
Unrestricted
umber: SIEMENS-FOR003
Page: 1 of 1
0 0C (Min)
50 0C (Max)
PMI
Report Internal
( Note-2 & Note Cleaning as per Remarks
Format (Y/N)
-3)
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
Customer QMD
Unrestricted
SIEMENS Fit Up and Weld Visual Report Format Number: SIEMENS-
Name of Client: M/s RUNGTA MINES LIMITED KAMANDA Report No:RML/SL/TEE-DR-0282 Date:
ISO/ Line Number:62OP42504-U1-6730102096-42 Piping Class:CARBON STEEL (CS) Service:STEAM Pre‐Heat Temperature: 10 0C (Min)
Equipment Number:ATM FLASH TANK VENT TO ATMOSPHERE& DRAIN TO TRENCH Equipment Drawing Number: Inter Pass Temperature: 150 0C (Max)
Temporary PMI
Heat Number Type Of Thickness Dimensional & WPS Root W/V attachment Final Weld Report
Sr No. Matcode/Spool No. (Note-1) Joint No. Joint Size (NB) (mm) Allignment Fit-Up Check Fit-up Date Number Welder Number (Note:7) NDT Visual Final WV Date ( Note-2 & Note
Check
(Note-5) -3)
Unrestricted
VT-0281-01 NA J-17 BW 219.1 8.18 OK OK 7/22/2021 WPS/COND/FAB03 W-02 OK NA OK 7/26/2021 NA
26
Note :- 1. For LTCS/ NACE/ IBR Material Heat Number shall be recorded . 2. For LAS/ SS/ Non- Ferrous material,upon satisfactory PMI,QMD engineer shall sign . 3. In Case of LTCS and NACE welding consumables batch number shall be recorded. 4. During LTCS welding heat input shall be monitored & recorded in Remarks. 5. Up o
temporary attachment area,QMD engineer shall sign. 6. Internal Cleaning to be checked as per format No: EPCMD-2-QMOO-FMT-PP-011. 7. Before starting 2nd run welding, root weld visual must be cleared for socket weld, any joint for compressor suction line, major pumps, internally lined pipes, lube oil and control oil lines, sulfuric ac
Name
Date
Unrestricted
EMENS-FOR003
Page: 1 of 1
Internal
Cleaning as per Remarks
Format (Y/N)
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Unrestricted
YES
QMD
Unrestricted
SIEMENS Fit Up and Weld Visual Report Format Number: SIEMENS
Name of Client: M/s RUNGTA MINES LIMITED -KAMANDA Report No:RML/SL/TEE/VT-0805 Date:
ISO/ Line Number:62OP42504-U1-673010209-43 Piping Class:CARBON STEEL(CS) Service:STEAM Pre‐Heat Temperature: 10 0C (Min)
Equipment Number:HP FLASH TANK VENT TO ACC DUCT Equipment Drawing Number: Inter Pass Temperature: 150 0C (Max)
Temporary PMI
Heat Number Type Of Thickness Dimensional & WPS Root W/V attachment Final Weld Report
Sr No. Matcode/Spool No. (Note-1) Joint No. Joint Size (NB) (mm) Allignment Fit-Up Check Fit-up Date Number Welder Number (Note:7) NDT Visual Final WV Date ( Note-2 & Note
Check
(Note-5) -3)
Note :- 1. For LTCS/ NACE/ IBR Material Heat Number shall be recorded . 2. For LAS/ SS/ Non- Ferrous material,upon satisfactory PMI,QMD engineer shall sign . 3. In Case of LTCS and NACE welding consumables batch number shall be recorded. 4. During LTCS welding heat input shall be monitored & recorded in Remarks. 5. Up o
temporary attachment area,QMD engineer shall sign. 6. Internal Cleaning to be checked as per format No: EPCMD-2-QMOO-FMT-PP-011. 7. Before starting 2nd run welding, root weld visual must be cleared for socket weld, any joint for compressor suction line, major pumps, internally lined pipes, lube oil and control oil lines, sulfuric ac
Name
Date
Unrestricted
EMENS-FOR003
Page: 1 of 1
Internal
Cleaning as per Remarks
Format (Y/N)
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
QMD
Unrestricted
SIEMENS Fit Up and Weld Visual Report Format Number: SIEMENS
Name of Client: M/s RUNGTA MINES LIMITED -KAMANDA Report No:RML/SL/TEE/VT-0805 Date:
ISO/ Line Number:62OP42504-U1-673010209-44 Piping Class:CARBON STEEL(CS) Service:STEAM Pre‐Heat Temperature: 10 0C (Min)
Equipment Number:HP FLASH TANK DRAIN TO CONDENSATE STORAGE TANK Equipment Drawing Number: Inter Pass Temperature: 150 0C (Max)
Temporary
Heat Number Type Of Thickness Dimensional & WPS Root W/V attachment Final Weld
Sr No. Matcode/Spool No. (Note-1) Joint No. Joint Size (NB) (mm) Allignment Fit-Up Check Fit-up Date Number Welder Number (Note:7) NDT Visual Final WV Date
Check
(Note-5)
Note :- 1. For LTCS/ NACE/ IBR Material Heat Number shall be recorded . 2. For LAS/ SS/ Non- Ferrous material,upon satisfactory PMI,QMD engineer shall sign . 3. In Case of LTCS and NACE welding consumables batch number shall be recorded. 4. During LTCS welding heat input shall be monitored & recorded in Remarks. 5. Up o
temporary attachment area,QMD engineer shall sign. 6. Internal Cleaning to be checked as per format No: EPCMD-2-QMOO-FMT-PP-011. 7. Before starting 2nd run welding, root weld visual must be cleared for socket weld, any joint for compressor suction line, major pumps, internally lined pipes, lube oil and control oil lines, sulfuric ac
Name
Date
Unrestricted
umber: SIEMENS-FOR003
Page: 1 of 1
0 0C (Min)
50 0C (Max)
PMI
Report Internal
( Note-2 & Note Cleaning as per Remarks
Format (Y/N)
-3)
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
NA YES
Customer QMD
Unrestricted