Professional Documents
Culture Documents
Pass Box - Definition, Specifications & Working Principle
Pass Box - Definition, Specifications & Working Principle
CLEANROOM EQUIPMENT
HOME / CLEANROOM EQUIPMENT
/ PA S S B O X : D E F I N I T I O N , S P E C I F I C AT I O N S & W O R K I N G P R I N C I P L E
Table of contents
1. Pass box definition
2. Pass box classification
Static pass box
Dynamic pass box
3. Pass box structure
Static pass box structure
Dynamic pass box structure
4. Pass box working principle
Static pass box working principle
5. Pass box specifications and dimensions
Static pass box specifications and dimensions
Pass box is an indispensable unit in cleanroom. In this article, VCR will introduce you pass box
definition, specifications, and working principle. Let's find out!
If you want to order pass box for cleanroom in Viet Nam, please contact VCR via hotline +84 90
123 7008.
1. Pass box definition
Pass box is a kind of facility used for transferring goods between inside and outside of
cleanroom. It is normally located on partition walls of cleanroom.
It can prevent any disturbance of airflow and air pressure in clean room, which can be caused by
the door opening for goods transferring. Moreover, it can reduce the time from operators
moving in and out, to prevent any dust coming from the out regions.
Pass box for clean room is equipped with UV lamp which is used for bacteria control. Pass box is
provided with two interlocked doors, when a door is open, the other door is forced to close, in
this way it prevents direct contact between the connected areas.
Static pass box is normally used to transfer materials and goods between cleanrooms of the
same levels.
Static pass box is equipped with UV light and an interlock system. There are 2 types of static
pass box: mechanical interlock static pass box and electronic interlock static pass box
Dynamic pass box is normally used to transfer materials and goods between cleanrooms of
different levels or between cleanroom and non-cleanroom.
Besides UV light and an interlock system, dynamic pass box is equipped with a suction HEPA
filter of around 0.3 microns. The dynamic pass box also has a differential pressure gauge ranging
from 0 to 250 pa. It is also equipped with a motor blower for blowing out dust particles.
Read more: 9 things you should know about dynamic pass box
Body: The body of the box consists of the outer casing and the inner chamber. The inner
chamber is made of 304 stainless steel, while the outer casing can be made of materials such as
304 stainless steel, 201 stainless steel, powder-coated steel, etc.
When buying a pass box, we need to consider the external size and the internal size of the pass
box body.
Doors: Two doors (one on each side) with tempered glass windows sealed by durable feather
edge rubber prevents airborne particles contamination. Besides, each door has door handle.
The door handles are different according to the types of interlock system pass box uses.
Pass box hinges made of SUS 304 stainless steel are durable and easy to clean
Interlock system: This is an important part of every pass box, ensuring two doors don't open at
the same time. This prevents the risk of cross-contamination in clean rooms. Interlock system
has two types: mechanical interlock system and electronic interlock system
UV light: UV light are designed inside pass box for disinfection of transferred objects before
entering the cleanroom.
Fan: It sucks the air and blows it through HEPA filter. The clean air will go into the chamber to
sterilize the objects
HEPA filter: H13 or H14 filter with filtration efficiency up to 99.995% is widely used in dynamic
pass box
DOP/PAO test port: Provision of DOP/PAO Test Port in dynamic pass box is available for HEPA
Filter leak test and particle count.
Differential pressure gauge: It is used in dynamic passbox to check the differential pressure
across HEPA filter
The interlock is in mechanical form. When one door is opened, the other door cannot be
opened. One door must be closed before the other door can be opened.
The electronic interlock use integrated circuits, electromagnetic locks, control panels, and
indicator light.
When one door is opened and the indicator light is on, the indicator light on the other side does
not light up, indicating that the door cannot be opened at the same time. When the door is
closed, the indicator light on the other side will light up, indicating that the other door can be
opened.
+ When the material is put inside pass box and the door is closed, UV light will be turned on
within 15 minutes to kill the bacteria. Then the material will be taken out.
Dynamic pass box is a self-cleaning pass box. The air is sucked by a centrifugal fan then passed
through HEPA filter. After the pressure is equalized, the filtered air enters the working zone at a
uniform air velocity, forming a clean working environment.
The air outlet surface can also be replaced with a nozzle, which increases the air velocity to
meet the requirements of blowing dust on the material surface.
External size
620×560×580 720×660×680 820×860×780 920×860×880
(L×D×H)mm
Working size
(L×D×H)mm 500×500×500 600×600×600 700×700×700 800×800×800
External size
670×580×1000 770×680×1100 870×780×1200 970×880×1300
(L×D×H) mm
Working size
500×500×500 600×600×600 700×700×700 800×800×800
(L×D×H) mm
First, we should check whether the interlock system works properly. If not, contact the
manufacturer/supplier or professionals to repair the pass box.
The service life of UV light is 4000 hours. Be aware of the working performance of UV light.
We provide high-quality products with competitive prices and large quantities nationwide.
At Vietnam Cleanroom Equipment, our team knows how to help you find the right pass box for
your needs. Get a quote for pass box price and know exactly what to expect – contact us today
via hotline +84 90 123 7008 (Whatsapp)
2000 views
SEARCH
Search...
CATEGORIES
Knowledge
Cleanroom
Cleanroom Equipment
Cleanroom Accessory
Cleanroom Supplies
Cleanroom Furniture
HVAC
Application
Air Filter
Standards
» GMP
Panel
Video
News
» Company News
» Promotion
» Recruitment
TOP READ
FEATURED VIDEO
VIETNAM CLEANROOM
ABOUT VCR
About Us
Commitment
Our websites
Contact Us
STORE SYSTEM
North:
+ Lane 279 Phuc Loi, Phuc Loi, Long Bien, Ha Noi
+ Kim Chung, Dong Anh, Ha Noi
Central: 42 An Duong Vuong Street, Vinh City, Nghe An Province
South:
+ Road 48, group 40, Hiep Binh Chanh Ward, Thu Duc, Ho Chi Minh City
+ 104/4 Cho Chieu Street, Ho Nai 3, Trang Bom, Dong Nai Province
Factory: An Tuong, Vinh Tuong, Vinh Phuc Province
NEWSLETTER
Name
Email
Email
Submit
Request A Quote