Professional Documents
Culture Documents
General index
Presentation Distribution . . . . . . . . 95
• Tap-offs and splitters.
• Outlet sockets.
Signal Reception . . . . 9 • 1st IF SAT line amplifier.
• Terrestrial antennas. • Shielded diplexer.
• Satellite dishes. • Equalizers.
• Converters. • Coaxial cables.
• 1st IF SAT Line Amplifier
• Mechanical accessories. Accessories . . . . . . . . 105
• Filters.
Headends . . . . . . . . . 31 • Combiners.
• Multi-Processing system. • Attenuators.
• Compact headend • Coaxial bridge.
QPSK-AM. • Connectors, . . .
• NEXUM system.
• MICROMATV system.
• Band and Distribution amplifiers. Technical Notes. . . . . 111
3
Fagor Electrónica
European company that develops and
manufactures electronic components.
Its main plant is located in Mondragón
(Guipúzcoa) and the company operates
commercially in the five continents.
Semiconductors
Signal Processing:
• TV Reception Systems
• Home Automation
• Wireless Communications
4
40 years of Innovation Work team
Fagor Electrónica is a dynamic company,
in continuous evolution, pioneer in the Fagor Electrónica has a human potential with
development of the 1st Programmable the knowledge and experience necessary to
Terrestrial TV Headend and in developing successfully take on the key challenges of the
systems which apply a new concept such as future, in accordance with the adaptation which
the MULTI-PROCESSING range of products. the competitive market demands at present.
5
Quality as our
strategy
At Fagor Electrónica, Quality Management
is a top strategic consideration, as this is
what lays the foundations of sound,
competitive development. FAGOR,
the first company to obtain the ISO 9001
certification, in 1993, and more recently
the ISO 14001 environmental certification.
6
7
8
Signal Reception
RECEPTION
SIGNAL
A complete range of products to ensure opti-
mum reception of terrestrial and satellite TV
broadcasts, including antennas, satellite dishes,
mechanical accessories, converters, ...
INDEX Page
Terrestrial antennas
• AN BI - AN BIII Series............................................. 10
• FM-DAB Series ....................................................... 11
• FAN Series ............................................................... 12
• Di@na G 69 Series .................................................. 13
• Dipole....................................................................... 14
• Min@ Series............................................................. 15
• Digit Series .............................................................. 16
Satellite dishes
• PO Series................................................................. 17
• Satellite dish + LNB kits......................................... 18
Converters
• LNB Series............................................................... 19
Mechanical accessories
• Supports .................................................................. 21
• Towers...................................................................... 22
• Masts ....................................................................... 25
• Clamps .................................................................... 27
• Brackets .................................................................. 28
• Application examples ............................................. 29
9
TERRESTRIAL TV ANTENNAS
AN BI Series
RECEPTION
APPLICATION
Terrestrial TV installations, community and individual.
CHARACTERISTICS
■ Robust, strong antenna, made of aluminium.
Weight (4 u.) Kg 9
AN BIII Series
7-elements BI channel antenna. Supplied in common
packaging with individual protection bag.
APPLICATION
Terrestrial TV installations, community and individual.
CHARACTERISTICS
■ Robust, strong antenna, made of aluminium.
MODEL AN07
Reference 80007
Channels E05 ... E12
Gain dB 9
Impedance Ω 75
Front-to-back ratio dB 19
o H 53
Horizontal opening angle <)
V 72
130 km/h 50
Windload N
150 km/h 69
Return losses dB >9
Packing
dimensions (4 u.) mm 1665 x 505 x 125
Weight (4 u.) Kg 8
10
FM-DAB RADIO
TERRESTRIAL ANTENNAS
FM-DAB Series
RECEPTION
Terrestrial antennas for FM and DAB radio.
APPLICATION
SIGNAL
Community and individual installations of digital and analogue radio
reception.
CHARACTERISTICS
■ Made of aluminium.
■ Omnidirectionals.
■ ANT-DAB: Antenna for digital radio reception.
11
TERRESTRIAL TV ANTENNAS
UHF
FAN Series
RECEPTION
MODEL FAN 1369 FAN 2369 FAN 4337 FAN 4351 FAN 4369 FAN 10337 FAN 10351 FAN 10369
Reference 81369 82369 84337 84351 84369 80337 80351 80369
Channels 21 ... 69 21 ... 69 21 ... 37 21 ... 51 21 ... 69 21 ... 37 21 ... 51 21 ... 69
Gain dB 10,5 12,5 14,5 16,5
Impedance Ω 75
Return losses dB 9
Front-to-back ratio dB 25
Horizontal opening angle º<) 54 40 33 22
130 km/h 50 54 70 112
Windload N
150 km/h 69 74 97 154
Length mm 474 818 1.267 1.232 1.253 2.442 2.390 2.490
Units per package 6 4 5 6 3
Packing dimensions mm 1300 x 505 x 165 1300 x 505 x 255 1300 x 505 x 255
Weight Kg 10 8 9 11 9
dB 15
14
13 FAN 4337 FAN 4351 FAN 4369
FAN 13 FAN 23
12
11
10 0 dB 0 dB
9 30° 30° 30° 30°
21 25 30 35 40 45 50 55 60 65 69
-10 -10
60° 60° 60° 60°
dB 17
-20 -20
16
15 FAN 10337 FAN 10351 FAN 10369
14 90° 90° 90° 90°
13
12
11
10
21 25 30 35 40 45 50 55 60 65 69
FAN 43 FAN 103
12
DIGITAL TERRESTRIAL TV ANTENNA
UHF
Di@na G 69 Series
RECEPTION
Rhombus shape antenna that provides a superior response
in the UHF band.
SIGNAL
APPLICATION
Specifically designed for Digital and Analogue Terrestrial TV installations.
CHARACTERISTICS
■ Pre-assembled for easy set-up.
■ The reflector and dipole have been designed for a higher front-to
back ratio.
■ Long-life antenna due to its aluminium and “luran” plastic
construction.
■ Ergonomic design for a tool-free installation.
■ Suitable for horizontally or vertically polarised channels, maintaining
its water-resistance in any position.
■ It has an “F” connector with protection cover.
■ In case of low coverage areas, it allows to incorporate the @ktive,
a dipole that improves the antenna factor of merit in the installation
(included in ref. 84386 and 84387).
21 25 29 33 37 41 45 49 53 57 61 65 69
13
LOW NOISE, ACTIVE DIPOLE
@ktive
RECEPTION
DESCRIPTION
UHF Preamplifier designed for TV reception in weak signal areas.
SIGNAL
CHARACTERISTICS
■ Low noise figure
■ Protected against electric discharge
■ High output level
■ Designed with SMD technology
■ Embedded shielding by design
■ Excellent adaptation to input and output impedance
■ Especially designed for Di@na antenna
MODEL @ktive
Reference 84385
Band covered MHz 470 ÷ 862
Minimum input level for S/N = 30 dB, analogue TV dBμV 34
Minimum input level for S/N = 19 dB, digital TV dBμV 23,5
Input impedance Ω 300
Maximum output level DIN 45004B (-60 dB) dBμV 102
Output impedance Ω 75
Output connector F (h)
Gain dB 18 (470 MHz) / 15 (862 MHz)
Noise figure dB 2
Packing dimensions mm 424 x 200 x 92
Weight Kg 0,250
AMB 836
Medidor de nivel
TEST
(-30 dB)
24 VDC
220 VAC
FA 802N
TV
HI-FI
14
DIGITAL TERRESTRIAL TV ANTENNA
UHF
Min@ Series
RECEPTION
Compact UHF antenna. Supplied in common packaging
with individual protection bag.
SIGNAL
APPLICATION
Suitable for signal reception in individual and community installations.
CHARACTERISTICS
■ Easy to assemble, just a click to put the directors and dipole into
place.
■ The reflector and dipole have been designed for a higher Front-to-
back ratio.
■ Suitable for horizontally or vertically polarised channels, maintaining
its water resistant feature.
MODEL Min@
Reference 84372
Channels 21 ... 69
Gain dB 12,5
Impedance Ω 75
Return losses dB 15
Front-to-back ratio dB 25
Horizontal opening angle º<) 40
Length mm 750
130 km/h 54
Windload N
150 km/h 74
Units per package 10
Packing dimensions (10 u.) mm 770 x 220 x 700
Weight (10 u.) Kg 14,5
dB 13 0 dB
12 30° 30°
11 -10
10 60° 60°
9 -20
8
21 25 30 35 40 45 50 55 60 65 69
90° 90°
15
DIGITAL TERRESTRIAL TV ANTENNA
UHF
Series
Digit
RECEPTION
APPLICATION
Digital and analogue TV reception.
CHARACTERISTICS
■ Compact and resistant with strong, undeformable clip.
■ The aluminium reflectors are supplied pre-assembled to make their
installation easier, with no need for tools.
■ It has stud bolts to avoid being lost or dropped during assembly
operations.
■ High directivity thanks to a shaft with 43 directive elements,
optimum response for the whole UHF band, not only high
frequency channels.
■ Immune to most interference generated by different sources.
■ It has an F connector which gives it high shielding.
Digit 45 Digit 75
16
SATELLITE
DISHES
RECEPTION
Satellite dishes manufactured in electro zinc-coated steel
with a polyester coating ensuring high level of resistance to
SIGNAL
weather conditions.
APPLICATION
Suitable for community and individual Satellite TV installations.
Available a wide range of diameters according to the size of the ins-
tallation.
CHARACTERISTICS
■ The parabolic reflectors are designed to achieve high gain.
■ Pole or wall mounting.
17
ANTENNES
converters.
APPLICATION
Suitable for community and individual satellite TV installations.
CHARACTERISTICS
■ The parabolic reflectors are designed to achieve high gain,
guaranteeing great strength and mechanical resistance.
■ Easy fitting system.
■ LNB: low noise figure and high gain.
18
CONVERTERS
LNB Series
RECEPTION
Universal low noise block converters suitable for any offset
satellite dish.
SIGNAL
APPLICATION
Valid for any commercial TV SAT applications. The Universal model
has one output for individual installations and the Quattro model has
4 outputs for community installations.
CHARACTERISTICS
■ Stand out for their low noise figure and high gain which together
with Offset type satellite dishes make it possible to obtain merit
factors ideal for collective installations.
■ One model for any kind of Ku transmission band.
19
1st IF SAT
LINE AMPLIFIER
AL 46
1st IF SAT signal line amplifier.
RECEPTION
APPLICATION
Suitable for digital or analogue TV installations.
SIGNAL
CHARACTERISTICS
■ Offers a linear response, up to 2150 MHz.
■ Transparent for 22 KHz switching signal control.
■ Remote powered through the coaxial cable.
MODEL AL 46
Reference 86246
Type of connector F (f)
Frequency range MHz 950 ÷ 2300
Gain (950 ÷ 2300 MHz) dB 15 ÷ 18
Noise figure dB 7
Max. output level (- 35 dB) dBμV 109
Current drawn mA 50
DC pass (max.) A 1
Supply voltage Vdc 15 ± 3
Packing dimensions mm 80 x 20 x 25
Weight Kg 0,1
FM UHF
AMB
820
FA 802 N
IN
RF
DXR 216 BSD 203 DC
PO 064 IN
SAT
LNB 201
TV
TV
AL-46 Receptor SAT HI FI
Receptor TDT
20
MECHANICAL ACCESSORIES
RECEPTION
BASE FOR POLE MODEL PPA 200
Base for pole of 200 x 200 mm.
SIGNAL
Reference 86104
Distance between holes 200 x 200 mm
Holes diameter 20 mm
Height 820 mm
Tube diameter 60 mm
Units per package 1
Weight per package 6,7 Kg
Packing dimensions 920 x 280 x 270
BPP 200
BASE FOR DISH MODEL BPP 200
Base for dish to be fitted. 200 x 200mm.
Reference 82436
Units per package 2
Weight per package 6 Kg
Packing dimensions 480 x 290 x 320
PML 32 SPU 40
WALL & MAST SUPPORTS MODEL PML 32 SPU 40
PML 32: wall/mast support "L" shape
Reference 86103 86106
for 65 cm. dish.
SPU 40: wall support "U" shape for Tube diameter (mm) 32 40
65/80 cm. dishes. Units per package 10 10
Weight per package 8 Kg 15 Kg
Packing dimensions 440 x 380 x 130 580 x 430 x 210
FITTING A SUPPORT FOR A SATELLITE DISH FITTING A SUPPORT FOR A SATELLITE DISH
PO 064
PPA 200
PPS 806
21
MECHANICAL ACCESSORIES
TOWERS
RECEPTION
APPLICATION
Installations in which the antennas have to be located at a great height
or where the strength of the antennas needs reinforcing.
CHARACTERISTICS
■ Made of zinc-plated iron.
■ Round tube diameter: 20 mm.
■ The towers can be fixed to the ground or roof by means of a tower
base that can be screwed or embedded.
PUTTING UP A TOWER
PNT 15
PNT 25
TRT 25
APR 035
CBL AC3
ANC VT
22
MECHANICAL ACCESSORIES
TOWER FITTINGS
RECEPTION
TOWER BASE FOR SCREWING
Base for screwing zinc-plated iron tower.
SIGNAL
MODEL BTR AT
Reference 82405
Width 180 mm
Units per package 4
Weight per package 6 Kg
Packing dimensions 310 x 310 x 220
MODEL BTR AB
Reference 82407
Width 180 mm
Units per package 4
Weight per package 8 Kg
Packing dimensions 510 x 310 x 220
GUY WIRE
3 mm braided steel wire.
MODEL CBL AC3
Reference 82411
Length 100 m.
Weight per package 1,5 Kg
Packing dimensions 190 x 190 x 60
23
MECHANICAL ACCESSORIES
TOWER FITTINGS
RECEPTION
WIND ANCHORING
Bushing wind anchoring with plates. M12
SIGNAL
MODEL ANC VT
Reference 82408
Thread diameter M12
Units per package 15
Weight per package 28 Kg
Packing dimensions 515 x 305 x 120
24
MECHANICAL ACCESSORIES
MASTS
RECEPTION
Masts for antennas with sections that can be assembled to
make a longer mast.
SIGNAL
APPLICATION
Installations in which terrestrial TV and radio masts need to be
located at a great height.
CHARACTERISTICS
■ Made of galvanised steel.
■ MST 430 applied to the end of the pylon. MST 430
MST 325
MST 315
25
MECHANICAL ACCESSORIES
MAST ACCESSORIES
RECEPTION
CHIMNEY BRACKET
Bracket to fit a mast to a chimney, which by
means of a wire and a tensioning device MODEL ACH 045
ensures that a antenna mast is securely fixed. Reference 82419
Enables masts to be fitted without any building
Mast diameter Up to 45 mm
work on the facade.
Units per package 8
Weight 13 Kg
Dimensions 500 x 470 x 270
CLIP
Clip secured with nail.
MODEL GRP 001
Reference 82428
Units per package 100
Packing weight 1,5 Kg
Packing dimensions 150 x 230 x 150
26
MECHANICAL ACCESSORIES
CLAMPS
RECEPTION
Reinforced clamps to fix masts to a wall, both for screwing
and embedding.
SIGNAL
GRM U50
APPLICATION
Installations in which Terrestrial TV and radio antennas on a mast have
to be fixed to a wall. GRM U30
CHARACTERISTICS
■ Made of zinc-plated iron.
GRM A20
GRE AT
GRP AT
27
MECHANICAL ACCESSORIES
BRACKETS
RECEPTION
DOUBLE BRACKET
U-shaped zinc-plated bracket with three jaws
SIGNAL
SINGLE BRACKET
U-shaped bracket with a jaw for fixing to the
mast. MODEL BRI S68
For masts up to 60 mm in diameter. M8 Reference 82426
Units per package 25
Packing weight 5 Kg
Packing dimensions 310 x 230 x 100
28
MECHANICAL ACCESSORIES
APPLICATION EXAMPLES
RECEPTION
PUTTING UP A MAST ON A ROOF FITTING A MAST TO A CHIMNEY
SIGNAL
MST 430 MST 430
MST 325 MST 325
MST 315 MST 315
CBL AC3
ACH 045
APR 035
BTJ 035
TNS 106
ANC VT
GRM U50
BRI D68 GRM U30
BRI S68 GRM A20
GRP AT
GRE AT
PO 064 PO 064
PPA 200
PPS 100
BTR AT
BTR EM
BTR AB
29
30
Headends
MULTI-PROCESSING SYSTEM
Page
HEADENDS
32
to universal amplification solutions like the
MICROMATV ® series. • SRM+ ST Stereo Receiver - Modulator ................ 33
• SM+ VSB Modulator .............................................. 34
• SM+ ST Stereo VSB Modulator ............................ 35
• CIF + A/D Channel converter via IF ...................... 36
• SDT N QPSK/QAM Transmodulator...................... 37
• SDT SB QPSK/QAM Transmodulator ................... 38
• SDM+ QPSK/AM Demodulator-Modulator ................ 39
• SDM+ ST QPSK/AM Stereo Demodulator-Modulator ...... 40
• TDM COFDM - PAL Transmodulator..................... 41
• TDM-ST COFDM - PAL Stereo Transmodulator .. 42
• AFM FM Amplifier .................................................. 43
• SHA N/ SAC N Headend Amplifier ........................ 44
• IFL 1st IF SAT Twin Converter .............................. 45
• IFA S 1st IF SAT Headend Amplifier...................... 46
• SPS N Power supply............................................... 47
• SPS+ Power supply ................................................ 48
• Accessories............................................................. 49
• Application Examples............................................. 51
QPSK-AM COMPACT HEADEND
• Disat 6 ..................................................................... 54
NEXUM SERIES
• NEX Channel Amplifier........................................... 55
• NEX Multi-channel Amplifier ................................. 56
• IFA 1st IF SAT Amplifier ......................................... 57
• SPS 523 Power supply ........................................... 58
• Accessories............................................................. 59
• Examples ................................................................. 61
MICROMATV SYSTEM
• MicroMATV FUTURA .............................................. 62
• UCF 200 - BUS adapter.......................................... 63
• MicroMATV plus...................................................... 64
• MicroMATV plus N .................................................. 65
• MicroMATV .............................................................. 66
• SAB Series............................................................... 68
• Accessories............................................................. 69
• Examples ................................................................. 70
BAND AND DISTRIBUTION APLIFIERS & DTT RECEIVER
• SABAL Series .......................................................... 71
• DWBA 415................................................................ 72
• IFA 2000 N................................................................ 73
• TEDI 200 .................................................................. 74
• Examples ................................................................. 75
31
MULTI - PROCESSING SYSTEM
RECEIVER - MODULATOR
32
MULTI - PROCESSING SYSTEM
STEREO RECEIVER - MODULATOR
HEADENDS
CHARACTERISTICS
■ In DUAL mode A/B or B/A channel switching is provided.
■ Includes independent processing of audio carriers with PANDA-
compatible adaptive de-emphasis.
■ The direct connection between the LNB and the receiver and the
possibility of a splitting function at the input allows a very simple set-up.
■ The modulator operates in any TV channel (BI, BIII, “S” Bands and
UHF) and its VSB output allows adjacent channel operation.
■ The output auto-combining system and the signal of high spectral
purity allows broad band amplification.
■ It also offers the possibility of fine tuning the output channel
frequency to disperse intermodulation products in installations with Supply voltage Vdc 30 17 12 5
many channels. Current drawn (8,10 W) mA 3 16 470 420
■ RF output signal ON/OFF switchable for analysis and headend Operating temperature range 0 ÷ 50º C
adjustment.
■ Brightness adjustment available. ■ Incorporates test bars generator.
■ Video modulation depth adjustable from 75 to 90%. ■ Screws and power supply cable included.
■ It allows to generate black screen for distributing audio signals.
33
MULTI - PROCESSING SYSTEM
VSB MODULATOR
SM 6000+ / SM 7000+
Modulator with VSB output, that allows adjacent channel
operation. A programmable output channel means that the
modulator can easily be inserted into the headend since it
operates in any TV channel (BI, BIII, “S” Bands and UHF).
APPLICATION
Analogue satellite TV community installations, where locally produced
channels insertion is needed.
CHARACTERISTICS
■ It allows audio volume adjustment to equalise them to the level of
HEADENDS
34
MULTI - PROCESSING SYSTEM
VSB STEREO MODULATOR
SM 6000+ ST / SM 7000+ ST
Modulator with VSB output, that allows adjacent channel
operation. It has 2 audio carriers for processing STEREO or
DUAL signals. A programmable output channel means that
the modulator can easily be inserted into the headend since
it operates in any TV channel (BI, BIII, “S” Bands and UHF).
APPLICATION
Analogue satellite TV community installations, where locally produced
channels insertion is needed.
CHARACTERISTICS
HEADENDS
■ In DUAL mode A/B or B/A channel switching is provided.
■ It allows audio volume adjustment to equalise them to the level of
other installed programs.
■ It also offers the possibility of fine tuning the output channel
frequency to disperse intermodulation products in installations with
many channels.
■ RF output signal ON/OFF switchable for analysis and headend
adjustment.
■ Brightness adjustment available.
■ Video modulation depth adjustable from 75 to 90%.
■ Incorporates test bars generator
■ It allows to generate black screen for distributing audio signals. Supply voltage Vdc 30 24 12 5
■ Screws and power supply cable included. Current drawn (7,5 W) mA 1 115 335 145
Operating temperature range 0 ÷ 50º C
35
MULTI - PROCESSING SYSTEM
CHANNEL CONVERTER VIA IF
36
MULTI - PROCESSING SYSTEM
QPSK / QAM TRANSMODULATOR
HEADENDS
CHARACTERISTICS
■ Adjacent channel operation.
■ No need of input splitters or output combiners
■ Displays BER, Bit Error Rate, for accurate measuring of installation
margin.
■ Easy programming of the output channel by UCF 100 Control Unit.
■ Screws and power supply cable included.
37
MULTI - PROCESSING SYSTEM
QPSK / QAM MODULATOR (Stuffing Bytes)
CHARACTERISTICS
■ Adjacent channel operation.
■ No need of input splitters or output combiners
■ Displays BER, Bit Error Rate, for accurate measuring of installation
margin.
■ Easy programming of the output channel by UCF 100 Control Unit.
■ Screws and power supply cable included.
38
MULTI - PROCESSING SYSTEM
QPSK / AM TRANSMODULATOR
HEADENDS
CHARACTERISTICS
■ No need of input splitters or output combiners.
■ Displays the S/N ratio to know picture quality.
■ Easy programming of the output channel by UCF 100 Control Unit.
■ OSD to simplify system parameters programming.
■ Baud Rate from 4 to 45 Mbaud.
■ Automatic Code Rate detection.
■ Menu guided programming with OSD, On Screen Display.
■ Teletext and Radio programs identification.
■ Screws and power supply cable included.
Supply voltage Vdc 30 17 12 5
Current drawn (10,5 W) mA 2 16 430 1000
Operating temperature range 0 ÷ 40º C
39
MULTI - PROCESSING SYSTEM
QPSK / AM STEREO TRANSMODULATOR
CHARACTERISTICS
■ In DUAL mode A/B or B/A channel switching is provided.
■ No need of input splitters or output combiners.
■ Displays the S/N ratio to know picture quality.
■ Easy programming of the output channel by UCF 100 Control Unit.
■ OSD display to simplify system parameters programming.
■ Baud Rate from4 to 45 Mbaud.
■ Automatic Code Rate detection.
■ Programming with OSD Display
■ Teletext and Radio programs identification.
Supply voltage Vdc 30 17 12 5
■ Screws and power supply cable included.
Current drawn (10,6 W) mA 2 16 440 1005
Operating temperature range 0 ÷ 40º C
40
MULTI - PROCESSING SYSTEM
COFDM-PAL TRANSMODULATOR
HEADENDS
■ Adjacent channel operation.
■ Operates on any VSB output and input channel.
■ Automatic detection/configuration of FFT mode (2K, 8K),
constellation, Code Rate, guard interval and bandwidth.
■ Does not require input splitters or output combiners.
■ Makes it possible to know image quality by measuring the BER
before Viterbi and by S/N estimation.
■ The output channel is easily programmed through the UCF 100
control unit.
■ Has an OSD menu to simplify the programming of the system
parameters.
Supply voltage Vdc 30 24 17 12 5
■ Identification of programs containing teletext and radio.
■ Screws and power supply cable included. Current drawn (10 W) mA 1 — — 430 960
Operating temperature range 0 a 40 º C
41
MULTI - PROCESSING SYSTEM
COFDM-PAL STEREO TRANSMODULATOR
CHARACTERISTICS
■ In DUAL mode A/B or B/A channel switching is provided.
■ Adjacent channel operation.
■ Operates on any VSB output and input channel.
■ Automatic detection/configuration of FFT mode (2K, 8K),
constellation, Code Rate, guard interval and bandwidth.
■ Does not require input splitters or output combiners.
■ Makes it possible to know image quality by measuring the BER
before Viterbi and by S/N estimation.
■ The output channel is easily programmed through the UCF 100
control unit.
■ Has an OSD menu to simplify the programming of the system Supply voltage Vdc 30 24 17 12 5
parameters. Current drawn (10 W) mA 1 — — 430 960
■ Identification of programs containing teletext and radio. Operate temperature range 0 a 40 º C
■ Screws and power supply cable included.
42
MULTI - PROCESSING SYSTEM
FM AMPLIFIER
HEADENDS
■ Screws and power supply cable included.
43
MULTI - PROCESSING SYSTEM
HEADEND AMPLIFIER
■ Each input has an amplification step before gain regulation. This way,
the noise figure is not directly affected by the gain regulation.
■ Screws and power supply cable included.
■ Optimum frequency response.
■ High dynamic threshold.
SHA N SAC N
Supply voltage Vdc 24
Current drawn mA 170 (4 W) 320 (7,7 W)
Operating temperature range 0 ÷ 50º C
44
MULTI - PROCESSING SYSTEM
1st IF SAT TWIN CONVERTER
HEADENDS
CHARACTERISTICS
■ One model is all that is needed for any input and output channel.
■ Input and output frequency accuracy are controlled by high
precision PLL´s, that guarantee a very low phase noise.
■ A built-in AGC control fixes the output level.
■ IFL-T model is a 1ST IF SAT TERMINAL converter and it has 2
independent inputs for processing signals coming from different
sources.
■ Screws and power supply cable included.
45
MULTI - PROCESSING SYSTEM
1st IF SAT AMPLIFIER
distribution network.
■ Compatible with any existing terrestrial headend.
■ Designed for processing Analogue and Digital TV .
■ Screws and power supply cable included.
46
MULTI - PROCESSING SYSTEM
POWER SUPPLY
HEADENDS
Supply voltage 187 ÷ 264 Vac
Current drawn (67 W output) 90 W
Operating temperature range 0 ÷ 50º C
47
MULTI - PROCESSING SYSTEM
POWER SUPPLY
48
MULTI - PROCESSING SYSTEM
ACCESSORIES
FRAME
Designed for mounting modules of the SCM
6000 system. The kit supplied includes all APPLICATION MODEL REF.
necessary accessories for wall mounting.
Dimensions: 488 x 275 x 20 mm 9 mod. + power supply BST 608 83600
Depth with modules: 200 mm
HOUSING
HEADENDS
Designed for installation and protection of SCM
6000 system. Includes all necessary accessories APPLICATION MODEL REF.
for wall mounting. With safety lock.
Allows KIT VNT 56 (Ref. 83004) to be mounted. 9 mod. + power supply CFR N56 V 83605
Dimensions: 650 x 410 x 205 mm.
Weight 8 Kg.
VENTILATION KIT
Suitable for assembling on the CFR N56 V
housing. APPLICATION MODEL REF.
COVERS
CC 01 CP 01
CC 01: BLIND COVER
Suitable for covering free slots in the APPLICATION MODEL REF.
19” Rack frame.
CP 01: CABLE PASSAGE COVER CC 01 83701
19” Rack frame
Blind cover prepared for cable passage. CP 01 83702
49
MULTI - PROCESSING SYSTEM
ACCESSORIES
CONTROL UNIT
Universal control unit designed for
programming FAGOR modules. TYPE OF CONNECTOR MODEL REF.
Packing dimensions: 155 x 110 x 50 mm.
Weight: 0,1 Kg. MINI DIN 8 UCF 100 85100
75 Ω F LOAD
HEADENDS
F (m) CX 75 F 84011
50
MULTI - PROCESSING SYSTEM
APPLICATION EXAMPLES
• 47 ÷ 862 MHz
• 3 analogue satellite TV
programs
• 4 DTT channels
• 2 digital terrestrial TV
programs
• 5 digital satellite TV
programs
• 1 surveillance channel FM UHF UHF SURVEILLANCE SATV SATV
HEADENDS
OUTPUT (47 ÷ 862 MHz) 8
6
4 A A D D D D
AFM SAC N CIF+ CIF+ CIF+ CIF+ CIF+ CIF+ SM+ SPS+
5
2
11 10
1
SRM+ SRM+ SRM+ SDM+ SDM+ SDM+ SDM+ SDM+ SPS+
9
12
51
MULTI - PROCESSING SYSTEM
APPLICATION EXAMPLES
• 47 ÷ 2150 MHz
• 10 digital SAT TV
transponders
• 2 analogue satellite TV
programs
2 3
SATV SATV
HEADENDS
IFL IFL IFL IFL IFL IFA N SHA N SRM+ SRM+ SPS+
+LNB
8 6
7 5
52
MULTI - PROCESSING SYSTEM
APPLICATION EXAMPLES
• 47 ÷ 2150 MHz
• 16 digital satellite TV
transponders
• 3 analogue satellite FM UHF UHF SURVEILLANCE SATV SATV
TV programs
• 4 digital terrestrial TV
programs
• 2 digital terrestrial TV
programs
• 1 surveillance channel
HEADENDS
• FM Radio
• 5 digital satellite TV 3 A A
1
programs
AFM SAC N CIF+ CIF+ TDM TDM TDM TDM SM+ SPS+
4 8
5
11
9
2
SRM+ SRM+ SRM+ SDM+ SDM+ SDM+ SDM+ SDM+ SPS+
14
13
OUTPUT
(47 ÷ 2150 MHz)
6 7
IFL IFL IFL IFL IFL IFL IFL IFL IFA N SPS+
+ LNB
12
10
53
COMPACT HEADEND
QPSK / AM
DiSAT 6 Series
QPSK/AM receiver designed for headend conversion of 6
digital satellite TV channels to analogue TV in RF. Available
in two versions: DiSAT 6U for UHF channels (C21-C69) and
DiSAT 6V for VHF channels (S09-S26).
APPLICATION
Suitable for small and medium sized distributions, giving its RF
modulated output in double sideband. Ideal for use in low cost
community projects. No need for individual receivers to be installed for
each TV. Functions autonomously in communal areas of buildings,
recovering reception automatically in case of electricity cuts or service
HEADENDS
interruptions.
CHARACTERISTICS
■ No need of input splitters.
■ Receivers and output channels easily programmable by means
of the integrated programmer with access code.
■ Valid for radio program reception.
■ High audio and video quality.
■ Combiner for mixing TV signals coming from other equipment.
■ Independent output level regulation for each channel. Input power 230 V ± 15%
■ RS 232 for software updating. Current drawn (230 Vac) max. 150 W
■ Satellite signal demultiplexing bridges included. Operating temperature range 0 ÷ 45º C
54
NEXUM SYSTEM
CHANNEL AMPLIFIER
NEX Series
Single channel amplifier, suitable for amplifiying and
filtering of TV signals in MATV headend systems. These
amplifiers are perfect for working in adjacent channels.
APPLICATION
Medium- to large-sized community digital and analogue TV
installations located in poor reception areas with big level differences
between channels.
CHARACTERISTICS
■ Metal chassis (zamak), integrating the input/output connectors to
HEADENDS
give the unit great strength.
■ High shielding degree.
■ High reliability and screening factor due to “F” connectors.
■ Modular design that allows channel configuration according to
installation needs.
■ The use of filters with high "Q" factor (quality factor) inductive lines
guarantees a high channel selectivity.
■ Easy to set-up due to its system of splitting at input and combining
at output.
MODEL NEX 401 NEX 402 NEX DAB NEX 403 NEX 445 NEX 545
Reference 39102...04 39200 39201 39305...12 39421...69 39521...69
Channels E02...E04 FM 87 ÷ 108 DAB 195 ÷ 223 E05...E12 21...69 21...69
115 115
Max. output level (DIN 45004K) dBμV 123 (DIN B –35 dB) (DIN B –35 dB) 123 117 125
Gain dB 40 40 35 40 40 50
dB 30 30 30 30 30 30
Gain adjustment @ N±1 15 — — 15 15 15
Bandwidth MHz 7 21 28 7 8 8
Selectivity @ –15 MHz
PVN–PAN-1 20 35 23 20 16 16
PAN–PVN+1 dB 20 @ +15 MHz 20 16 16
PV+20 MHz >70 30 8 70 >70 >70
Return losses dB 9
Noise figure dB 11 4 5 11 11 11
Current drawn (24 VDC) mA 90 65 65 105 55 110
Input-Output impedance Ω 75
Input-Output connectors F (h)
Packing dimensions mm 195 x 70 x 32
Weight Kg 0,45
55
NEXUM SYSTEM
MULTICHANNEL AMPLIFIERS
NEX Series
Multichannel amplifier, suitable for amplifying and filtering
of TV signals in MATV headend systems. These amplifiers
are perfect for working in adjacent channels.
APPLICATION
Medium- to large-sized community digital and analogue TV
installations located in poor reception areas with big level differences
between channels.
CHARACTERISTICS
■ Metal chassis (zamak), integrating the input/output connectors to
HEADENDS
56
NEXUM SYSTEM
1 IF SAT AMPLIFIER
st
IFA 400
Equalized amplifier for the 950 to 2300 MHz band. Amplifies
the 1st IF SAT signal and mixes it with terrestrial channels.
APPLICATION
Community digital and analogue satellite TV installations where the
1st IF SAT signal has to be distributed.
CHARACTERISTICS
■ Metal chassis (zamak), integrating the input/output connectors to
give the unit great strength.
■ High shielding degree.
HEADENDS
■ High reliability and screening factor due to its “F” connectors.
■ Easy to set-up due to its system of splitting at input and combining
at output.
57
NEXUM SYSTEM
POWER SUPPLY
SPS 523
Power supply module for providing operating voltage to the
Nexum series modular system.
APPLICATION
Medium- to large-sized community digital and analogue TV
installations located in poor reception areas with big level differences
between channels.
CHARACTERISTICS
■ Designed using switching techniques, achieves high performance
and minimum losses.
HEADENDS
58
NEXUM SERIES
ACCESSORIES
FRAME
Designed for mounting modules of the Nexum
Series Modular System. The kit supplied APPLICATION MODEL REF
includes all necessary accessories for wall
mounting. 6 mod. + power supply BST N06 83112
Raster: 40 mm. 12 mod. + power supply BST N12 83109
Dimensions: 18 mod. + power supply BST N18 83110
Ref. 83109: 531 x 139 x 15 mm. BST N12 & BST N18
Ref. 83110: 747 x 139 x 15 mm. 10 mod. + power supply BSK N10 83111
for 19” Rack mounting
Ref. 83111: 480 x 177 x 70 mm.
HEADENDS
Ref. 83112: 325 x 140 x 15 mm.
BSK N10
HOUSING
Designed for installation and protection of
Nexum Series Modular System. With safety APPLICATION MODEL REF.
lock.
Prepared for the VNT 56 Kit (Ref. 83004) to be 12 mod. + power supply CFR N56V 83605
mounted. or 8 modules SCM 6000
Dimensions: Housing for 2x18 Nexum,
Ref. 83605: 650 x 410 x 205 mm. (7 Kg) or 1 x 18 Nexum + CFR N218 83604 CFR N56V CFR N218
Ref. 83604: 790 x 590 x 205 mm. (8 Kg) 1 x 8 SCM 6000
Ref. 83607: 790 x 250 x 150 mm. (6 Kg) Housing for 1 x 18 CFR N118 83607
Nexum
CFR N118
75 Ω F LOAD
Coaxial resistive load for loading open
connectors. TYPE OF CONNECTOR MODEL REF.
F (m) CX 75 F 84011
ADAPTER
F Female-Female
TYPE OF CONNECTOR MODEL REF.
F MALE CONNECTOR
F(m) connector for cable
(outside diameter 6,8 mm), TYPE OF CABLE MODEL REF.
59
NEXUM SERIES
ACCESSORIES
BAND AMPLIFIER
• Frequency band: 470 to 862 MHz
• Gain: 12 dB TYPE OF CONNECTOR MODEL REF.
• Max. output level: 105 dBuV
• Noise figure: 3,5 dB F(h)-F(m) ABF 012 85053
• Band flatness: 2 dB
• Power supply: 24V ± 5%
• Consumption: < 50 mA
SUPPLY INJECTOR
HEADENDS
60
NEXUM SYSTEM
APPLICATION EXAMPLES
• 47 ÷ 2150 MHz
• 2 polarities of
1st IF SAT
• 8 terrestrial channels, SAT 1 SAT 2 UHF 1 UHF 2 UHF 3 DAB FM
analogue or digital
• FM radio
• DAB radio
5
2 SPS 3
HEADENDS
1
IFA IFA NEX NEX NEX NEX NEX NEX NEX NEX NEX NEX
SAT 1 RF SAT 2 6 4 7
8 DXR 2D
(Ref. 86242)
SAT 1 + RF SAT 2 + RF
• 47 ÷ 2150 MHz
• 1 polarity of 1st IF SAT
• DTT Channels: 66 to 69
• 3 terrestrial channels, SAT UHF
analogue or digital
4
3 SPS
RF + SAT
5 6
61
PROGRAMMABLE
SELECTIVE AMPLIFIER
OUTPUTS
MODEL MicroMATV® futura MicroMATV® futura MicroMATV® futura
100 C 200 C 300 C
Reference 35580 35552 35553
Number of outputs 1 1 2
Band RF RF+1st IF SAT RF RF+1st IF SAT
47÷68 47÷68 47÷68 47÷68
Bandwidth MHz 130÷862 130÷862 950÷2150 130÷862 130÷862 950÷2150
Output level IM3 DIN45004B (4) dBμV 121 121 121 117 117 121
Packing dimensions mm 390 x 275 x 60
Weight Kg 4,5
(1).- 1ST IF SAT input (only MicroMATV futura 200 C and MicroMATV futura 300 C). (3).- Fixed 8 dB slope between begin and end of band.
(2).- –4 dB lower (MicroMATV futura 300 C model). (4).- IM3 -60 dBc for TV PAL and -35 dBc for FM, DAB, 1ST IF SAT and TDT (COFDM).
62
PROGRAMMABLE
SELECTIVE AMPLIFIER
HEADENDS
signals, guaranteeing a balanced output signal simplifying
adjustment as much as possible. Manual adjustment option.
■ Automatic recognition of channel type: digital or analogue and
identifies empty and occupied channels.
■ Easily programmable with the UCF 200 control unit, using a simple
and intuitive menu. With memory to clone up to 8 different
configurations and programme using a single MicroMATV key.
■ It incorporates amplification of 1st IF SAT.
■ Auxiliary input for channels processed by other equipment.
■ Immune to broadcasts from other services like GSM, UMTS, ...
■ Chassis totally made of Zamak.
■ Incorporates RS 232 Serial port for firmware upgrading. Supply to LNBs 0V/13V/17V/0Hz/22KHz, 300mA
■ Supply to pre-amplifiers at UHF1/UHF2 (12 V) inputs. Supply to pre-amplifiers/mast ampli. 24V/100mA
Supply to pre-amplifiers UHF1/UHF2 inputs 12V/30mA
Mains supply 230V ± 15%
Working temperature 0-50 ºC
INPUTS
OUTPUTS
MODEL MicroMATV® futura MicroMATV® futura MicroMATV® futura
100 200 300
Reference 35551 35550 35549
Number of outputs 1 1 2
Band RF RF+1st IF SAT RF RF+1st IF SAT
47÷68 47÷68 47÷68 47÷68
Bandwidth MHz 130÷862 130÷862 950÷2150 130÷862 130÷862 950÷2150
Output level IM3 DIN45004B (4) dBμV 121 121 121 117 117 121
Packing dimensions mm 390 x 275 x 60
Weight Kg 4,5
(1).- 1ST IF SAT input (only MicroMATV futura 200 and MicroMATV futura 300). (3).- Fixed 8 dB slope between begin and end of band.
(2).- –4 dB lower (MicroMATV futura 300 model). (4).- IM3 -60 dBc for TV PAL and -35 dBc for FM, DAB, 1ST IF SAT and TDT (COFDM).
63
FAGOR CONTROL UNIT
UCF 200
64
PROGRAMMABLE
SELECTIVE AMPLIFIER
Series
MICROMATV plus
®
HEADENDS
CHARACTERISTICS
■ Includes the Automatic Equalization System “AES”, an exclusive
function that simplifies the setting-up, since it automatically adjusts
the input signals, guaranteeing a perfect output signal. MicroMATV
plus can also be manually adjusted.
■ Easy to programme through an external Control Unit, UCF 100. All
functions are automatically memorised and controlled by a FAGOR
Microprocessor.
■ Includes a visual level indicator.
■ The amplifier has a 24V output and an auxiliary TV signal input.
65
PROGRAMMABLE
SELECTIVE AMPLIFIER
66
PROGRAMMABLE
SELECTIVE AMPLIFIER
Series
MICROMATV
®
HEADENDS
CHARACTERISTICS
■ Easy to programme. Keyboard selection with digital display allows
any combination of UHF channels, processing them completely
independently.
■ All functions are automatically memorized by a FAGOR
microprocessor.
■ The channels can be reprogrammed.
■ Designed to provide maximum versatility, it is easy to expand and
can be adapted to receive new channels in the future.
■ The UHF, VHF split amplifier guarantees IM2 free operation.
■ Includes an Output Level Meter, making the use of any additional Supply voltage 220 Vac ± 10 %
equipment unnecessary. Current drawn 10 W / 10 W
■ The SAB 252 amplifier is specially designed for use as a MicroMATV
output amplifier. Operating temperature range 0 ÷ 50º C
67
BAND AND DISTRIBUTION
AMPLIFIERS
SAB Series
Band amplification system with separate VHF and UHF
signal processing, to reduce the IM2 products.
APPLICATION
The different models in the SAB series cover a wide range of applica-
tions:
SAB 401/SAB 402can be used as a distribution amplifier, or an
extension amplifier for collectives.
SAB 401 is designed for working in high temperature environments.
SAB 304/SAB 404, suitable for use as a band amplifier for
HEADENDS
communities.
SAB 301/SAB 301-A, broadband amplifiers which allow a complete
processing of all TV channels, from 47 to 862 MHz. They can also be
used as final amplifier in CATV network.
CHARACTERISTICS
■ The circuit is housed in a single-part metal case which includes all
the input-output connectors.
■ It has shielding at the top and bottom.
■ High level of mechanical rigidity and complete protection against
electrical interference.
Supply voltage 230 Vac –10 % +15%
Current drawn 10 VA
Operating temperature range 0 ÷ 50º C
MODEL SAB 304 SAB 404 SAB 401** SAB 402 SAB 301 SAB 301-A
Reference 35304 35404 35415 35402 35301 35302
Number of inputs 4 4 1 1 1 1
Band coverage BI / FM / BIII / UHF BI / FM / BIII / UHF BI, FM, BIII*, UHF BI, FM, BIII*, UHF 47 ÷ 862 MHz 87,5 ÷ 862 MHz
Output level dBμV 109 117 111 117 116 116
DIN 45004B (–60 dB)
Gain dB 30 40 / 33 / 40 / 40 40, 33, 40, 40 40, 33, 40, 40 28 ÷ 35 28 ÷ 35
Input and output Ω 75 75 75 75 75 75
impedance
Noise figure dB 5 5 7, 7, 7, 6 7, 7, 7, 6 12...8 12...8
Regulation dB 20 20 20 20 20 20
Tilt regulation dB — — — — 0 ÷ 11 0 ÷ 11
Return path MHz — — — — 5 ÷ 30 5 ÷ 65
covered band
Return path dB — — — — – 3,5 – 3,5
insertion losses
Packing mm 250 x 125 x 62
dimensions
Weight Kg 0,8
68
®
MICROMATV SERIES
ACCESSORIES
HOUSING
Designed for installation and protection of
system elements. Includes all necessary APPLICATION MODEL REF.
accessories for wall mounting.
Safety lock provided. MICROMATVplus
CRF MMP 83203
Dimensions: 500 x 360 x 90 mm. MICROMATV + SAB 252
Weight: 1,7 Kg.
HEADENDS
Frequency band: 470 ÷ 862 MHz
In band return losses TYPE OF CONNECTOR MODEL REF.
(out of notch filter): >10 dB
Rejection at central frequency (Fc): 18 dB at F(f)-F(m) FTF 245 85052
470 MHz / 10 dB at 862 MHz
Rejection at Fc ± 12 MHz: 2 dB
In band through losses: <1 dB
DC pass: 1 A
BAND AMPLIFIER
Frequency band: 470 ÷ 862 MHz
Gain: 12 dB TYPE OF CONNECTOR MODEL REF.
Flatness: 2 dB
Noise figure: 3,5 dB F(f)-F(m) ABF 012 85053
Power supply: 24 V ± 5%
Consumption: <50 mA F(f)-F(m) AB 012 T 85027
Output level:
• ABF 012: 98 dBμV
• AB 012 T: 105 dBμV
AB 012 T: telepowered
SUPPLY INJECTOR
Frequency band: 5 ÷ 2150 MHz
Return losses: –10 dB TYPE OF CONNECTOR MODEL REF.
Through losses: 0,5 dB
DC pass: 1 A F(f)-F(m) ICF 001 85051
ADJUSTABLE ATTENUATOR
Frequency band: 5 ÷ 2150 MHz
Return losses: –10 dB TYPE OF CONNECTOR MODEL REF..
Through losses: 0,5 a 20 dB
DC pass (0-22 KHz): 1 A F(f)-F(m) ATF 020 85050
CONTROL UNIT
External programming unit.
Packing dimensions: 155 x 110 x 50 mm. TYPE OF CONNECTOR MODEL REF.
Weight: 0,1 Kg.
MINI DIN 8 UCF 100 85100
69
MICROMATV SERIES
APPLICATION EXAMPLES
MICROMATV plus MICROMATV futura 100 + Disat 6
FM UHF UHF UHF VHF UHF UHF UHF BIII FM
SAT
AMB @ktive
800
FM
UHF1
ABF 012
FTF 245
DISAT 6
UHF2
AUX
UHF3
VHF1 FT 110 F
UCF 100
RF
@ktive
@ktive
SAT2
UCF 200
OUTPUT
CX 75 F
Main Line
70 dBµV
UHF2
UHF1
FTF 245
FM
VHF FT 130 F
SALIDA SALIDA
70
BAND AND DISTRIBUTION
AMPLIFIERS
SABAL Series
Amplifiers specially designed for distribution of TV signals
up to 862 MHz or 2300 MHz.
APPLICATION
Designed to work under adverse weather conditions, where a robust
amplifier is needed.
CHARACTERISTICS
■ Their circuit is integrated in a Zamak box, which ensures correct
operation of the amplifier.
■ The DA 353 and WBA 433 models allow return path operation and
HEADENDS
have slope control for the direct way.
■ The HA 405 model is specially designed for amplifying both
analogue and DTT signals coming from several antennas. It has 5
inputs with independent regulation and 40 dB gain.
■ The amplifier has been optimised by specific circuits which protect
it against telecommunications services on adjacent frequency
bands.
■ Built-in switch mode power supply.
MODEL HA 405 DA 353 DA 353 A DA 354 DA 354 A WBA 433 WBA 433 A
Reference 35945 35920 35922 35924 35925 35930 35932
71
DOUBLE EXTENSION
AMPLIFIER
D WBA 415
Double extension amplifier specifically designed to
Community satellite TV installations with IF processors.
APPLICATION
Valid for a two-cable system with two independent satellite TV circuits
and a common one for terrestrial TV, in addition to the return path.
CHARACTERISTICS
■ The 1st IF SAT signals from inputs 1/2 and the terrestrial signal from
input 1 are amplified and distributed to their two outputs.
■ Has an equaliser for each satellite signal (0-20 dB regulation) with
HEADENDS
72
1st IF SAT
AMPLIFIER
IFA 2000 N
Amplifies the 1st IF SAT signal and combines it with
terrestrial channels. It has one input for amplifying the IF
signal and another input for the RF signal.
APPLICATION
Community Satellite TV installations with IF processors.
CHARACTERISTICS
■ A high performance RF / 1st IF SAT diplexer guarantees a noise
free terrestrial TV reception.
■ The 1st IF SAT amplification with positive slope (more gain in high
HEADENDS
frequencies: 8 dB) to compensate the cable attenuation, allows
distribution of the 1st IF SAT signal to more users.
■ It provides optional supply voltage for the LNB (+13 Vdc; 22KHz).
■ Power supply included.
WEATHERPROOF HOUSING
MODEL CFR 20
Reference 83602
Packing dimensions mm 330 x 285 x 190
Weight Kg 2,45
73
DIGITAL TERRESTRIAL RECEIVER
Tedi 200
Reduced size, carefully designed DTT receiver, with
ON/OFF connector for energy savings. Also has automatic
channel search and memorizes the last tuned channel.
Multiple functions and connector options.
APPLICATION
Reception of free digital terrestrial channels with no need to change
TV.
CAHRACTERISTICS
■ DVB-T compliance.
Electronic Programme Guide (EPG) for 14 days.
HEADENDS
■
■ Teletext and DVB subtitles.
■ OSD menu in 11 languages.
■ 8 favorites programme lists.
■ Language selection
■ Freeze image, zoom function...
■ Mosaic function
■ Screen format: 16:9 or 4:3> Parental control using a secret code. Operating temperature 0-40º C
■ Freeze image, zoom function... Packing dimensions 330 x 220 x 70
■ 4-digit display, clock. Weight 1,4 kg.
■ S/PDIF digital audio output
■ Video, Audio and Stereo Audio Output.
■ Two SCART connectors: TV and VCR.
■ 5 V power supply for indoor antenna.
■ Includes: remote control (with batteries), SCART connector cable,
antenna cable and user manual.
74
BAND AMPLIFIERS
APPLICATION EXAMPLES
D-WBA 415
HEADENDS
D-WBA D-WBA D-WBA
IFA IFA
400 400
RF+SAT 2
SAT 1
Connecting AERIAL+TDT+VCR+HIFI+TV
+5 Vdc
RCA cable
RF cable RF cable
VCR
Scart cable
To record TDT
HI-FI
RF cable
Scart cable
75
BAND AMPLIFIERS
APPLICATION EXAMPLES
IFA 2000 N series
8 FLOORS - 4 APPARTMENTS
UHF UHF UHF DAB FM SAT1
@ktive
SAT2
UCF 200
HEADENDS
ABF 012
CX 75 F
RF+ FI SAT 1
IFA 2000 N MICROMATV FUTURA
76
LINE AND DISTRIBUTION
AMPLIFIERS
APPLICATION EXAMPLES
SABAL Series
HA 405 Multiband Amplifier + SAB
HEADENDS
SAB SAB
301 301
SAB SAB
301 301
77
LINE AND DISTRIBUTION
AMPLIFIERS
APPLICATION EXAMPLES
SABAL Series
WBA 433 Wide Band Amplifier
WBA 433
HEADEND
RF + 1ª FI SAT
WBA 433
78
79
HEADENDS
80
Mast and Indoor Amplifiers
AMPLIFIERS
• AMB 600-N Series................................................... 82
• AMB 600-N (FM) Series .......................................... 83
• AMB 800 Series....................................................... 84
Power supply
• FA 802 N................................................................... 86
Examples.............................................................................. 87
Indoor amplifiers
Examples.............................................................................. 91
Indoor amplifier
81
MAST BAND AMPLIFIER
■
■ Designed with SMD technology.
Supply voltage 24 V ± 10 %
Operating temperature range –20 ÷ 60º C
Gain regulation dB 25 19 25 19 25 19 25 19 19 25 19 19 25 19 19 25 19 19 19
Noise figure dB 5 2,5 5 2,5 5 2,5 5 5 5 5 3 3 5 8 3 5 3 3 3
Attenuation in the
TEST output dB 30
UHF selective 0-15 dB (470 MHz) 0-15 dB (470 MHz) 0-15 dB (470 MHz)
dB — —
equalization (Notch) 0-6 dB (830 MHz) 0-6 dB (830 MHz) 0-6 dB (830 MHz)
FM rejection dB 35 25
27 MHz rejection (CB) dB 20 —
Current draw mA 38 44 50
Packing dimensions mm 155 x 110 x 45
Weight Kg 0,45
(1)
N UHF1: 21-37 UHF2: 38-69
(2)
UHF1: 21-31 UHF2: 32-49 UHF3: 50-69
82
MAST BAND AMPLIFIER
FM PROCESSING
AMPLIFIERS
■ Designed with SMD technology
■ The AMB 624N, AMB 635N and AMB 644N models give higher Supply voltage 24 V ± 10 %
output level, keeping second and third order intermodulation Operating temperature range –20 ÷ 60º C
products at very low level, when operate with strong input signals.
Gain regulation dB — 19 25 19 25 19 25 19 19 25 19 19 25 25 19 25 25 19 19
Noise figure dB — 2,5 5 2,5 5 2,5 5 5 3 5 5
Attenuation in the
TEST output dB 30
UHF selective dB — — 0-15 dB (470 MHz) — 0-15 dB (470 MHz)
equalization (Notch) 0-6 dB (830 MHz) 0-6 dB (830 MHz)
27 MHz Rejection (CB) dB 20
Current drawn mA 38 44 50
Packing dimensions mm 155 x 110 x 45
Weight Kg 0,45
83
MAST BAND AMPLIFIER
■ F connectors.
■ Output level Test. Supply voltage 24 ± 10% Vdc
Wide range of input levels. Operating temperature range – 20 ÷ 60º C
AMPLIFIERS
■
■ AMB 802 DC, AMB 836 with DC pass for pre-amplifiers.
Selective equalization 3 tuneable UHF filters in main amplification line
Notch 1 390 MHz 12
660 MHz 7
Notch 2 445 MHz dB 16
720 MHz 7
Notch 3 600 MHz 4
975 MHz 11
MODEL AMB 801 AMB 802 DC** AMB 810 AMB 820 AMB 823
Reference 36011 36012 36010 36020 36023
Nbr. of inputs 1 2
Bands UHF UHF BI/BIII UHF BI/BIII UHF BI÷FM/BIII UHF
Gain dB 38 28 28 38 28 38 28 38
Gain regulation dB 15 15 25 15 25 15 25 15
Output level DIN 45004B-60 dBμV 114
Input/output impedance Ω 75
Noise figure dB 3 4 5 3 5 3 5 3
Rejection out of band dB Compliance with EN 50083-2 “Antenna Input Resistance” • Internal immunity against unwanted signals from out of band
Test output dB –30 dB (from main output)
Current draw mA 93
Packing dimensions mm 170 x 105 x 50
Weight Kg 0,355
84
MAST BAND AMPLIFIER
AMPLIFIERS
■ AMB 802 DC, AMB 836 with DC pass for pre-amplifiers.
Selective equalization 3 tuneable UHF filters in main amplification line
Notch 1 390 MHz 12
660 MHz 7
Notch 2 445 MHz dB 16
720 MHz 7
Notch 3 600 MHz 4
975 MHz 11
UHF1: 21...37 B UHF1: 21-24 UHF2: 26-69 R UHF1: 21-45 UHF2: 46-69
UHF1: 38...69
* Other frequencies available under request. T UHF1: 21-29 UHF2: 30-69 S UHF1: 21-47 UHF2: 48-69
** With DC pass 12 Vcc, 40 mA L UHF1: 21-34 UHF2: 35-69 Q UHF1: 21-49 UHF2: 50-69
at UHF input.
N UHF1: 21-37 UHF2: 38-69 W UHF1: 21-54 UHF2: 55-69
V UHF1: 21-39 UHF2: 41-69 U UHF1: 21-56 UHF2: 57-69
A UHF1: 21-41 UHF2: 43-69 C UHF1: 21-59 UHF2: 60-69
85
POWER SUPPLY
FA 802 N
Power supply suitable for mast band amplifiers of AMB 800
and AMB 600 series.
APPLICATION
Suitable for individual systems or small installations. Compatible with
DTT requirements.
CHARACTERISTICS
■ Protected against short-circuits.
■ It has a shielded RF circuit, according to CE standard.
■ Class II power supply, reinforced isolation.
MAST AND INDOOR
AMPLIFIERS
MODEL * FA 802 N
Reference 66105
Output voltage Vdc 24 ± 10%
Max. output power mA 100
Number of outputs 2
Through losses dB 4
Input/output impedance Ω 75
Packing dimensions mm 165 x 92 x 60
Weight Kg 0,45
86
INDIVIDUAL RECEPTION
APPLICATION EXAMPLES
Mast amplification with AMB 836
UHF DAB FM
@ktive
AMB 836
24 VDC TEST
(-30 dB)
Level meter
AMPLIFIERS
TV
HI-FI
AMB 840
UHF BIV BV FM
AMB 840
24 VDC
220 VAC
FA
802 N
TV
HI-FI
87
INDOOR AMPLIFIERS 1 GHz
AD 52 / AD 420
Broad band amplifiers for indoor use.
APPLICATION
Suitable for installations with several TV sets which are remote from
the main socket.
CHARACTERISTICS
■ AD 420 model has a shielded RF circuit, according to CE standard,
and independent gain regulation in UHF and VHF.
■ Class II power supply, reinforced isolation.
MAST AND INDOOR
AMPLIFIERS
MODEL AD 52 AD 420
Supply voltage Vac 195 ÷ 265 198 ÷ 253
Power consumption W 3,5 4
Operating temperature range ºC 0 ÷ 50
MODEL AD 52 AD 420
Reference 36052 36420
VHF UHF VHF UHF
Band coverage (E2 ÷ S20) (21 ÷ 69) (E2 ÷ S20) (21 ÷ 69)
Number of output 2
Input/output impedance Ω 75
Return losses dB 9
1 : 23
Gain dB Output 2 20 22
: 13
Gain regulation dB 20 — 17 15
Noise figure dB 2,8 7 5
Max. output level DIN 45004B (–60 dB) dBμV Output 12 :: 104 100
94
Packing dimensions mm 135 x 70 x 70 165 x 92 x 60
Weight Kg 0,35 0,45
88
INDOOR AMPLIFIER
FULL BAND 1 GHz
AD 540 / AD 1000
Self-powered broadband amplifier for indoor use.
AD 540: amplifies signals from 47 to 862 MHz.
AD 1000: amplifies signals from 47 to 862 MHz, and allows
return path (from 5 to 30 MHz).
AD 1000 A: amplifies signals from 87 to 862 MHz.
APPLICATION
Suitable for individual digital terrestrial TV installations. The AD 1000
and AD 1000 A models are compatible with CATVs operators.
CHARACTERISTICS
■ Gain control
■ It has slope regulation to compensate the losses due to coaxial
cable attenuation. Models AD 1000 and AD 1000A incorporate an
equalization control.
■ AD 540: 4 independent outputs with the same output level.
■ AD 1000/AD 1000 A: Two independent outputs, the second one
AMPLIFIERS
MODEL AD 540 AD 1000
Supply voltage 230 Vac –15% +10%
Power consumption W 3 7
Operating temperature range ºC 0 ÷ 50
89
INDOOR AMPLIFIER
2,3 GHz
AD 2300
Self-powered broadband amplifier for indoor use. Amplifies
signals of the following ranges: 47÷862 MHz and 950÷2300
MHz. Includes return path.
APPLICATION
Designed for amplification in digital or analogue terrestrial TV indoor
installations.
CHARACTERISTICS
■ Amplification with positive slope (more gain in high frequencies, 4 dB
in the RF band and 7 dB in the 1st IF SAT band) to compensate the
cable attenuation.
■ 20 dB gain regulation in RF band.
■ Two independent outputs, the second one attenuated 10 dB with
respect to the first one.
■ It allows DC pass between outputs and input. Includes return path,
DISEqC or 22 KHz.
MAST AND INDOOR
MODEL AD 2300
Reference 36230
Number of inputs 1
Number of outputs 2
Frequency range MHz 47 ÷ 862 950 ÷ 2300
Gain 47 MHz 862 MHz 950 MHz 2150 MHz
• Output 1 16 20 23 30
• Output 2 dB 4 8 13 20
Max. output level DIN 4500 4B*
• Output 1 dBμV 108 114
• Output 2 96 104
Reflection coefficient dB 9 6
Gain regulation dB 20 —
Noise figure dB 4,5 10
Input / output impedance Ω 75
Return path frequency range MHz 5 ÷ 30
Return path through loss dB 3,5 (Output 1)
Input / output connectors F (f)
Max. current drawn A 0,5
Packing dimensions mm 165 x 92 x 60
Weight Kg 0,4
90
INDOOR EQUIPMENT
APPLICATION EXAMPLES
Indoor amplification (RF & 1st IF SAT)
DIS 409+
DES 4XX+
PAU 22+
1
DES 4XX+
2
DIS 409+
AD 2300
AMPLIFIERS
AD 1000 21 69
RF
21 69
+ VR
Indoor amplification RF
AD 540
RF
BSD 201 S
91
AUDIO/VIDEO MODULATOR
MOD Series
Self-powered modulator which generates an RF channel with
the Audio and Video information coming from a Video, DVD,
IRD, video door entry system, security cameras, etc.
APPLICATIONS
This modulator enables the reception of a signal coming from a receiver
with Audio and Video output, on a TV set without Audio and Video input.
The antenna signal from an outlet socket can be combined with a
newly generated channel and both are delivered at the output, thus
enabling their coaxial cable distribution throughout the dwelling.
CHARACTERISTICS
■ Double side band modulation, allowing one channel spacing operation.
■ Compact design, making it easy to install.
■ The output channel is easily programmed by two buttons and an
alphanumerical display.
■ Audio volume can be adjusted to be equalised with the volume of
MAST AND INDOOR
other programmes.
■ Incorporates a video-test bar generator making TV tuning easier.
■ Multi-standard and multi-band, with one single model covering all
standards and channels.
AMPLIFIERS
92
93
MAST AND INDOOR
AMPLIFIERS
94
Distribution
INDEX Page
DISTRIBUTION
• F Connector SPT / TAP Series .............................. 97
Shielded diplexer
• DXR Series .............................................................. 99
Outlet sockets
• 5-1000 MHz BASIC Series ..................................... 100
• 5-2300 MHz BASIC Series ..................................... 101
Equalizers
• ECU Series .............................................................. 102
Coaxial cables
• CCF Series............................................................... 103
95
TAP-OFFS AND SPLITTERS
SADDLE CLAMP
MODELS DIS 204+ DIS 409+ DES 211+ DES 216+ DES 220+ DES 225+ DES 411+ DES 416+ DES 420+ DES 425+
Reference 85354 85355 85370 85371 85372 85373 85380 85381 85382 85383
Nr of outputs 2 4 2 4
Covered band MHz 5 ÷ 2300
5 - 47 MHz 3,5 7,5 2,5 1,2 0,7 0,5 4 1,8 0,9 0,6
47 - 550 MHz 3,5 7,5 2,2 1,1 0,8 0,5 3,5 1,8 0,9 0,6
DISTRIBUTION
IN-OUT 550 - 862 MHz 4 7,5 2,4 1,1 0,8 0,6 4 1,9 0,9 0,7
Insertion loss 950 - 1550 MHz dB 4,5 8,5 2,9 1,5 1 1 4,2 2,8 1,4 1,1
1550 - 2150 MHz 5,5 9,5 3,2 1,5 1,2 1,4 4,4 3,2 1,9 1,6
2150 - 2300 MHz 5,5 9,5 3,7 2 1,5 1,8 4,5 3,5 2 1,7
5 - 47 MHz 11 16 21 25 11 15,5 20 25
47 - 550 MHz 11 16 21 25 11 16 20 25
IN-TAP 950 - 1550 MHz 11 16 21 25 11 16 20 25
Tap loss 950 - 1550 MHz dB 11 16 21,5 25 12 16 20 25
1550 - 2150 MHz 11,5 16,5 21,5 25 13 16 20 25,5
2150 - 2300 MHz 11,5 16,5 21,5 25,5 13 16,5 20,5 25,5
Isolation 47 - 950 MHz 23 24 25 25 23 25 25 25
dB 20 21 25 25 23 25 25 25
OUT-TAP 950 - 2150 MHz
OUT-OUT 47 - 862 MHz 24 24 21 22 22 25 21 21 22 21
dB
TAP-TAP isolation 950 - 2150 MHz 22 22 21 22 22 25 21 21 22 23
IN 47 - 862 MHz 14 14 17 20 20 22 15 16 20 22
dB
Return loss 950 - 2150 MHz 12 14 20 20 25 17 18 18 18 19
OUT 47 - 862 MHz 13 12 20 20 25 22 20 22 23 25
dB
Return loss 950 - 2150 MHz 12 12 17 16 17 15 16 18 17 16
TAP 47 - 862 MHz 12 13 17 16 18 19 21 20
dB
Return loss 950 - 2150 MHz 12 12 12 12 16 16 16 16
CD pass IN - OUT NO NO SI
24 VDC, 0, 5A, 22 KHz OUT - IN SI SI SI
IN - TAP NO
CD pass
24 VDC, 0, 5A, 22 KHz TAP - IN NO
TAP-TAP NO
Packing dimensions mm 185 x 90 x 50
Units per packing 10
Weight Kg 0,85
CONNECTIONS
96
TAP-OFFS AND SPLITTERS
WITH “F” CONNECTOR
TAP-OFFS
MODEL TAP 210 TAP 212 TAP 215 TAP 220 TAP 225 TAP 412 TAP 415 TAP 420 TAP 425
Reference 85210 85212 85215 85220 85225 85412 85415 85420 85425
Number of outputs 2 4
Covered band MHz 5 ÷ 2300
5 - 47 MHz 3,5 2,5 1,5 1,5 0,5 4 2 1 1
Through 47 - 862 MHz 3 2,5 1,5 1,5 0,5 4 2,5 1 1
dB
loss 950 - 2150 MHz 3,5 4 1,5 2,5 1,7 5 4 2 2
2150 - 2300 MHz 4 4 3 3,5 2,1 5,5 4,5 3 2
5 - 47 MHz 10 12 15 19,5 25,5 11 14,5 20 24,5
Tap 47 - 862 MHz 10,5 12 15 20,5 26 11 13,5 19,5 24
dB
loss 950 - 2150 MHz 11,5 13 15 20,5 24,5 13,5 14,1 18,5 23
2150 - 2300 MHz 12 13 15 20 24 14 14,5 18 22,5
5 - 47 MHz 20 25 25 30 35 28 30 45 45
Directional
47 - 950 MHz dB
DISTRIBUTION
attenuation 23 22 22 25 35 30 28 30 32
1000 - 2300 MHz 18 20 21 22 28 25 25 25 25
5 - 47 MHz 40 40 45 60 22 23 23 23 23
Outputs
47 - 950 MHz dB 30 30 35 45 22 22 22 22 22
isolations
1000 - 2300 MHz 28 30 30 32 22 21 21 21 21
Return 5 - 862 MHz 12
dB
losses 950 - 2150 MHz 10
Min. screening 5 - 862 MHz 65
dB
factor 950 - 2300 MHz 55
Packing dimensions (10 u.) mm 115 x 110 x 47
Weight (10 u.) Kg 0,95
SPLITTERS TAP-OFFS
MODÈL SPT 204 SPT 409 SPT 613 SPT 815 TAP 615 TAP 620 TAP 625 TAP 815 TAP 820 TAP 825
Reference 85209 85405 85600 85800 85615 85620 85625 85815 85820 85825
Number of outputs 2 4 6 8 6 8
Covered band MHz 5 ÷ 2300
5 - 47 MHz 4 7,5 10,5 11 3,5 1,5 0,5 3,5 1,5 1
Through 47 - 862 MHz 4 8 11 12 4 2 1,5 4 2 1
dB
loss 950 - 2150 MHz 5,5 9,7 14,5 15,5 5 4,5 3,5 5 3,5 2
2150 - 2300 MHz 6 10,5 15 16 5,5 5 5 5,5 3,7 2,5
5 - 47 MHz – – – – 15 19,5 24,5 15 20 24,5
Tap 47 - 862 MHz – – – – 15,2 20 24,5 15,5 20,5 25
dB
loss 950 - 2150 MHz – – – – 17,5 21 25 18 22,5 25
2150 - 2300 MHz – – – – 18,5 21 25 19 22,5 25
5 - 47 MHz – – – – 25 35 38 25 38 45
Directional
47 - 950 MHz dB – – – – 22 27 30 22 25 30
attenuation
1000 - 2300 MHz – – – – 21 25 28 20 25 28
5 - 47 MHz 21 21 22 25 22 25 25 22 28 28
Outputs
47 - 950 MHz dB 21 21 22 22 20 22 20 22 22 22
isolations
1000 - 2300 MHz 20 21 20 21 16 16 16 16 18 18
Return 5 - 862 MHz 12
dB
losses 950 - 2150 MHz 10
Min. screening 5 - 862 MHz 65
dB
factor 950 - 2300 MHz 55
Packing dimensions (10 u.) mm 115 x 110 x 47 205 x 125 x 70
Weight (10 u.) Kg 1,5 1,5
97
APPLICATION EXAMPLES
SAT2
UCF 200
ABN 012F
CX 75 F
PAU 24 F PAU 24 F
TAP 215
DISTRIBUTION
TAP 215
PAU 24 F PAU 24 F
TAP 215
TAP 212
PAU 24 F PAU 24 F
TAP 212
TAP 212
PAU 24 F PAU 24 F
TAP 212
98
SHIELDED DIPLEXER
DXR Series
Shielded diplexer with saddle clamp connection.
APPLICATION
Suitable for digital or analogue TV installations.
CHARACTERISTICS
■ DXR 216: diplexer with 2 inputs/1 output, suitable for splitting or
combining RF/1st IF SAT.
■ DXR 334: diplexer with 3 inputs/1 output, suitable for incorporating
QAM digital channels in analogue channels installations.
DISTRIBUTION
Number of outputs 1 1
DC pass SAT IN-OUT 500 mA, max —
SAT IN Input MHz 950 ÷ 2300 —
RF IN Input MHz 15 ÷ 862 15 ÷ 230, 470 ÷ 862
RF IN –12 dB Input MHz — 15 ÷ 862
Hyperband IN Input MHz — 300 ÷ 420
Output MHz 15 ÷ 2300 15 ÷ 862
Through loss SAT IN dB 2 —
Through loss RF IN dB 2 2 (862 MHz)
Through loss RF IN (–12 dB) dB — 12 (15 ÷ 862 MHz)
Through loss Hyperband IN dB — 3 (300 ÷ 420 MHz)
Output return losses dB 6 6
Reject SAT IN dB 36 (47 ÷ 862 MHz) —
13 (950 MHz)
Reject RF IN dB 30 (300 ÷ 420 MHz)
30 (1200 ÷ 2300 MHz)
Packing dimensions (8 u.) mm 115 x 110 x 47 115 x 110 x 47
Weight (8 u.) kg 0,95 0,95
99
OUTLET SOCKETS
5 ÷ 1000 MHz
BASIC Series
Outlet sockets with inductive devices for adequate filtering of
the signals at the outputs, with minimum through losses.
APPLICATION
TV Installations, both indvidual or community to be used as end socket
or for cascading.
CHARACTERISTICS
■ The circuit has a metal (zamak) housing to achieve a high degree of
shielding.
■ It has a special shielding at the input and output connections, and
it is designed for easy installation.
■ The outlet’s directivity guarantees enough isolation between floors.
■ Compatible with most of the electrical devices available.
TV - SAT COVER
MODEL SS BT SS BT B
Reference 85020 85031
Colour beige white
Packing dimensions (15 u.) mm 260 x 135 x 90
Weight (15 u.) Kg 0,5
100
OUTLET SOCKETS
5 ÷ 2300 MHz
BASIC Series
Outlet sockets with inductive devices for adequate filtering of
the signals at the outputs, with minimum through losses.
APPLICATION
Suitable for Digital TV, up to 2300 MHz in individual and community
installations.
CHARACTERISTICS
■ The circuit has a metal (zamak) housing to achieve a high degree of
shielding.
■ It has a special shielding at the input and output connections, and
it is designed for easy installation.
■ The outlet’s directivity guarantees enough isolation between floors.
■ Compatible with most of the electrical devices available.
MODEL BSD 201 S BSD 201 SDC BSD 203 N BSD 203 DC BSD 210 N BSD 210 DC BSD 215 N BSD 220 N
Reference 86218 86221 86205 86204 86219 86211 86215 86220
Number of outputs 2
Band coverage MHz 5 ÷ 2300
IN-OUT 300 mA max — — — — yes
DC pass — yes — yes — yes — —
SAT 300 mA max
5 - 30 MHz — 3,0 3,0 3,0
47 - 862 MHz — 2,5 2,0 1,8
Through losses 950 - 2150 MHz dB Single* — 2,5 3,0 3,0
2150 - 2300 MHz — 3,0 3,0 3,0
DISTRIBUTION
5 - 30 MHz 0,5 2,0 10 15,0 16,0
47 - 862 MHz 1 3,0 11,5 15,0 20,0
Derivation losses 950 - 2150 MHz dB 1 3,0 12 16,0 20,0
2150 - 2300 MHz 1 3,0 12,5 16,0 22,0
5 - 30 MHz — — 15 23 25
47 - 862 MHz — — 22 23 25
Directivity 950 - 2150 MHz dB — — 18 20 25
2150 - 2300 MHz — — 20 20 23
5 - 30 MHz 30 30 30 25 35
47 - 862 MHz 15 15 25 25 30
Isolation TV-R 950 - 2150 MHz dB 15 15 15 15 25
2150 - 2300 MHz 18 18 25 20 30
5 - 862 MHz 10
Return losses 950 - 2300 MHz dB 6
VHF 30 - 300 MHz 75
dB 65
Shielding factor UHF 300 - 862 MHz
SAT 950 - 2300 MHz 55
TV IEC 9,5 (h)
Output connectors (UNE 20-523-79) IEC 9,5 (m)
SAT
Packing dimensions (20 u.) mm 300 x 165 x 85
Weight (20 u.) Kg 2
*BSD 201 S and BSD 201 SDC model must be connected directly to tap-offs or splitter.
TV - SAT COVER
MODEL C BSD C BSD B
Reference 86230 86231
Colour beige white
Packing dimensions (20 u.) mm 190 x 90 x 85
Weight (20 u.) Kg 0,5
MODEL SS BT SS BT B
Reference 85020 85031
Colour beige white
Packing dimensions (15 u.) mm 260 x 135 x 90
Weight (15 u.) Kg 0,5
101
EQUALIZERS
ECU Series
A family of passive components that operate in broadband
allowing optimum flatness to be obtained in the signal
response of a distribution network for TV (CATV).
These devices compensate the attenuation tilt caused by the coaxial
cable used in the installation, which is proportional to frequency and
cable length.
Considering the complete band of frequencies used for the TV
service, between 47-862 MHz, the attenuation tilt produced by the
installation is influenced by type and length of the cable used, making
it necessary to select the appropriate ECU model for each tilt
(see chart).
Headend equipment
Tap-off
ECU ECU
ECU
Broadband amplifier
MODEL SELECTION
102
COAXIAL CABLES
CCF Serie
Low loss cables for use in CATV signal distribution in com-
munity and individual MATV-SMATV installations.
APPLICATION
• CCF SAT is valid for 1st IF SAT installations.
• CCF 017 & CCF 020 is used in general distribution.
• CCF SAT H in a low smoke halogen free cable(LSHF).
CCF TRA
• CCF TRA & CCF TRN:are valid for trunk installations.
CHARACTERISTICS
■ Black cables should be used for distribution
where PE cables are to be exposed
to sunlight. CCF SAT-N
CCF SAT
MODEL CCF TRN CCF TRA CCF SAT CCF SAT H CCF 019 CCF 017 CCF 020
CCF SAT N CCF 019 N
Internal conductor
Material Cu
Diameter mm 1,6 1,63 1,1 1,1 1 1,15 1
Resistance Ω/Km 8,57 9 20 19 23 20 22
DISTRIBUTION
Dielectric
Material PE physical process dielectric
Diameter mm 7,2 7,2 4,8 4,8 4,8 4,9 4,6
External conductor
Material sheet Cu / Pet Al / Pet / Al Cu / Pet Al / Pet / Al
Material net Cu CuSn Cu Al
Resistance Ω/Km 8,3 8 22 21 30 33 46
External conductor
Diameter mm 10,2 10,1 6,7 6,8 6,8 6,9 6,6
Min. curvature radius mm 80 40
Attenuation / 100 m: 50 MHz 2,7 3,1 4,8 4,4 4,7 4,8 4,5
100 MHz 3,8 4,4 6,5 6,2 6,5 6,4 6,6
200 MHz 5,4 6,3 8,6 8,7 8,8 8,5 8,6
300 MHz 6,6 7,7 10 10,7 10,3 9,8 10,2
470 MHz 8,3 9,6 12,5 13,4 12,8 12,3 12,7
600 MHz 10,2 10,8 14,9 15,1 14,9 14,5 15,1
860 MHz dB 12,3 13 17,9 18,1 17,8 17,4 18,1
1000 MHz 13,5 14 22,2 19,5 20 22,3 19,4
1350 MHz 16,4 16,2 22,4 22,7 21,6 22,2 21
1500 MHz 17,3 17,1 23,5 23,9 22,6 23,3 24,4
1750 MHz 18,7 18,5 25,7 25,8 26,4 25,8 26,4
2050 MHz 18,9 20 27,6 27,9 29,5 28,2 29,3
2150 MHz 19,8 20,5 28,9 28,6 30,9 29,6 30,7
5-1000 MHz dB 90 80 75 70
Shielding efficiency 1000-2150 MHz 85 75 70 65
Capacity pF/m 54 55
Impedance Ω 75
Reflection point dB < –20
MODEL CCF TRN CCF TRA CCF SAT CCF SAT CCF SAT N CCF SAT H CCF SAT H CCF 019 CCF 019 CCF 019 N CCF 017 CCF 020
Reference 84121 84111 84102 84123 84104 84112 84133 84119 84019 84020 84127 84129
Coil length 250 250 250 100/500 250 250 100/500 100/500 250 250 100/500 100/500
Coil support wood wood plastic cardboard plastic plastic cardboard cardboard plastic plastic cardboard cardboard
External conductor PE black PE black PVC white PVC white PE black LSFH white LSFH white PVC white PVC white PVC black PVC white PVC white
Packing dimensions 400 x 400 x 380 400 x 400 x 380 270 x 270 x 295 320 x 320 x 500 270 x 270 x 295 320 x 320 x 500 705 x 280 x 280 270 x 270 x 295 320 x 320 x 500
Weight 24,5 24,5 12 23 9,5 12,5 23 22 9,5 12 22,5 20
103
104
Accessories
ACCESSORIES
105
ACCESSORIES
TWO WAY SPLITTER COMBINER
Band coverage: 5 ÷ 862 MHz
Impedance: 75 Ω TYPE OF CONNECTOR MODEL REF.
Combining losses: 4 dB
Output isolation: 22 dB 2 x IEC (f) - 1 x IEC (m) MB 021 85001
SUPPLY INJECTOR
Frequency band: 5 to 2150 MHz
Return losses: -10 dB TYPE OF CONNECTOR MOD. REF.
Through losses: 0,5 dB
DC pass: 1A F(f)-F(m) ICF 001 85051
ADJUSTABLE ATTENUATOR
AT 323 AT 020
Frequency band: 47 ÷ 862 MHz
AT 323: Regulation margin: 3 - 23 dB TYPE OF CONNECTOR MOD. REF.
ACCESSORIES
ADJUSTABLE ATTENUATOR
Frequency band: 5 to 2150 MHz
Return losses: -10 dB TYPE OF CONNECTOR MOD. REF.
Through losses: 0,5 to 20 dB
DC pass (0-22 KHz): 1A F(f)-F(m) ATF 020 85050
FIX ATTENUATOR
Frequency band: 5 to 2300 MHz
Losses: 10 dB TYPE OF CONNECTOR MOD. REF.
Return losses: 10 dB
Impedance: 75 Ohm. F (m)-F (f) FAT 010 85041
DC block
106
ACCESSORIES
BROAD BAND AMPLIFIER (UHF)
Frequency band: 470 ÷ 862 MHz
Gain: 12 dB TYPE OF CONNECTOR MODEL REF.
Flatness: 2 dB
Noise figure: 3,5 dB F(f)-F(m) ABF 012 85053
Power supply: 24 V ± 5%
Consumption: <50 mA F(f)-F(m) AB 012 T 85025
Output level:
• ABF 012: 98 dBμV
• AB 012 T: 105 dBμV
AB 012 T: telepowered
ACCESSORIES
LOADING RESISTOR
75 Ω resistor suitable for loading unused
inputs/outputs. TYPE OF CONNECTOR MODEL REF.
— RC 075 85010
75 Ω F LOAD
Coaxial resistive load for loading open
connectors.(SCM 5000, 6000 and 7000 series). TYPE OF CONNECTOR MODEL REF.
F (m) CX 75 F 84011
107
ACCESSORIES
75 Ω F-F COAXIAL BRIDGE
PMD FF PMD FF N
Rigid 75 Ω coaxial bridge for splitting or
combining RF signals. TYPE OF CONNECTOR MODEL REF.
Raster: 48 mm. (Ref. 84031 y 84003)
F (m) - F (m) PMD FF 84031
Multi-processing system
Raster: 40 mm. (Ref. 84034) F (m) - F (m) PMD FFN 84034
Nexum system
F (m) CONNECTOR
F(m) connector for cable
(outside diameter 6,8 mm). TYPE OF CONNECTOR MODEL REF.
SHIELDED CONNECTOR
“F” ADAPTOR
Female-female F adapter (5 ÷ 2300 MHz).
TYPE OF CONNECTOR MODEL REF.
CONNECTOR
F(m) connector for trunk cable.
ACCESSORIES
108
109
ACCESSORIES
110
Technical Notes
INDEX Page
TECHNICAL
NOTES
111
TECHNICAL NOTES
STANDARD L Pv STANDARD I Pv
TECHNICAL
10 dB 7 dB
Ps Ps
NOTES
16 dB 16 dB
Sc Sc
8 MHz 8 MHz
112
TECHNICAL NOTES
CCIR STANDARDS
CCIR-Standard B D G H I K L M N
Number of lines 625 625 625 625 625 625 625 525 625
Channel Bandwidth 7 8 8 8 8 8 8 6 6
Video Bandwidth (MHz) 5 6 5 5 5,5 6 6 4,2 4,2
Video sound spacing +5,5 +6,5 +5,5 +5,5 +6 +6,5 +6,5 +4,5 +4,5
Vestigial side band (MHz) 0,75 0,75 1,25 1,25 1,25 0,75 1,25 0,75 0,75
Picture modulation Neg. Neg. Neg. Neg. Neg. Neg. Pos. Neg. Neg.
Sound modulation FM FM FM FM FM FM AM FM FM
113
TECHNICAL NOTES
FREQUENCY ALLOCATIONS
47 68 87,5 108 174 230 300 470 606 862 MHz
E2-E4
S1-S10 E5-E12 S11-S21 S21-S41 E21-E37 E38-E69
VHF UHF
S23 318...326 319,25 324,75 322 54 734...742 735,25 740,75 741,25 738
S24 326...334 327,25 332,75 330
55 742...750 743,25 748,75 749,25 746
S25 334...342 335,25 340,75 338
NOTES
S26 342...350 343,25 348,75 346 56 750...758 751,25 756,75 757,25 754
S27 350...358 351,25 356,75 354 57 758...766 759,25 764,75 765,25 762
S28 358...366 359,25 364,75 362 58 766...774 767,25 772,75 773,25 770
S29 366...374 367,25 372,75 370 59 774...782 775,25 780,75 781,25 778
S30 374...382 375,25 380,75 378 60 782...790 783,25 788,75 789,25 786
S31 382...390 383,25 388,75 386
S32 390...398 391,25 396,75 394 61 790...798 791,25 796,75 797,25 794
S33 398...406 399,25 404,75 402 62 798...806 799,25 804,75 805,25 802
S34 406...414 407,25 412,75 410 63 806...814 807,25 812,75 813,25 810
S35 414...422 415,25 420,75 418 64 814...822 815,25 820,75 821,25 818
S36 422...430 423,25 428,75 426 65 822...830 823,25 828,75 829,25 826
S37 430...438 431,25 436,75 434
66 830...838 831,25 836,75 837,25 834
S38 438...446 439,25 444,75 442
S39 446...454 447,25 452,75 450 67 838...846 839,25 844,75 845,25 842
S40 454...462 455,25 460,75 458 68 846...854 847,25 852,75 853,25 850
S41 462...470 463,25 468,75 468 69 854...862 855,25 860,75 861,25 858
114
TECHNICAL NOTES
CONVERSION TABLE
CASCADE AMPLIFICATION
Reduction of output level for broadband amplifiers according to the number of cascade amplifiers in the system.
Nr. of amplifiers — 2 3 4 5 6 7
Reduction of
dB 0 3 4,8 6 7 7,8 8,5
output level (RA)
The output level of the amplifiers must be reduced NO = NS - RC - RA
according to the table above to keep the NO = Max. operating level.
intermodulation products at the same level. NS = Output level (DIN 45004 B, IM3 –60 dB).
RC = Reduction by nr. of channels.
RA = Reduction by nr. of amplifiers
115
TECHNICAL NOTES
10 dB 15 dB 100 dBμV 10 dB
typical
95 dBμV
C/N ≥12
36 dB
C/N 46
C/N 31
Base
noise
QPSK
LEVEL OF SIGNAL
INTERMODULATION RATIO
116
117
TECHNICAL
NOTES
118
Product Index
INDEX Page
PRODUCT
INDEX
119
ALPHABETICAL INDEX (MODELS)
MOD. REF. Pág. MOD. REF. Pág. MOD. REF. Pág. MOD. REF. Pág.
120
NUMERICAL INDEX (REF. NUMBERS)
REF. MOD. Pág. REF. MOD. Pág. REF. MOD. Pág. REF. MOD. Pág.
06426 CIF 6000 + AD 36 36101 AD 1000 A 89 83112 BST N06 59 85162 BIF 14 N 100
06900 IFL 6000 45 36230 AD 2300 90 83203 CFR MMP 69 85163 BRF 00 N 100
06902 IFL 6000 T 45 36420 AD 420 88 83600 BST 608 49 85164 BIF 01 S 100
07426 CIF 7000 +AD 36 36425 AD 540 89 83602 CFR 20 86 85193 BUS ADAPTER 64
07900 IFL 7000 45 36810 AMB 610 N 82 83604 CFR N218 59 85209 SPT 204 97
07902 IFL 7000 T 45 36814 AMB 621 N 82 83605 CFR N56V 59 85210 TAP 210 97
08136 SDT 6300 N 37 36820 AMB 620 N 82 83607 CFR N118 59 85212 TAP 212 97
08137 SDT 7300 N 37 36821 AMB 620 NF 82 83701 CC 01 49 85215 TAP 215 97
08146 SDT 6400 N 37 36823 AMB 623 N 83 83702 CP 01 49 85220 TAP 220 97
08147 SDT 7400 N 37 36824 AMB 624 N 83 83704 BST 708 49 85225 TAP 225 97
08161 SDT 6300 SB 38 36830 AMB 630 N 83 83705 VNT 19 49 85354 DIS 204 + 96
08171 SDT 6400 SB 38 36831 AMB 631 N 82 83707 SPS KIT 60 85355 DIS 409 + 96
08165 SDT 7300 SB 38 36832 AMB 632 N 82 83708 CNX 300M 60 85370 DES 211 + 96
08175 SDT 7400 SB 38 36834 AMB 634 N 83 83709 CNX 300F 60 85371 DES 216 + 96
19650 SM 6000 + 34 36835 AMB 635 N 83 84004 MDIN 5 49 85372 DES 220 + 96
19665 SM 6000 + ST 35 36840 AMB 640 N 82 84011 CX 75F 50 85373 DES 225 + 96
19750 SM 7000 + 34 36842 AMB 632 NFT 82 84012 CNR MF 59 85380 DES 411 + 96
19765 SM 7000 + ST 35 36844 AMB 644 N 83 84014 CNR F TRN 108 85381 DES 416 + 96
27460 TDM 6000 41 39102 NEX 401 55 84016 ADF HHS 59 85382 DES 420 + 96
27475 TDM 6000 ST 42 39200 NEX 402 55 84019 CCF 019 103 85383 DES 425 + 96
27560 TDM 7000 41 39201 NEX DAB 55 84020 CCF 019 N 103 85405 SPT 409 97
27575 TDM 7000 ST 42 39204 IFA 400 57 84028 CNR MI 108 85412 TAP 412 97
27580 SDM 6000 + 38 39305 NEX 403 55 84029 CNR HI 108 85415 TAP 415 97
27595 SDM 6000 + ST 40 39421 NEX 445 55 84031 PMD FF 50 85420 TAP 420 97
27660 SRM 6000 + 32 39501 NEX 545 Bicanal 56 84032 CMD EU-ST 50 85425 TAP 425 97
27675 SRM 6000 + ST 33 39521 NEX 545 55 84033 CMD 3 RCA 50 85600 SPT 613 97
27760 SRM 7000 + 32 39570 NEX 545 Tetra 56 84034 PMD FF N 59 85615 TAP 615 97
27775 SRM 7000 + ST 33 39571 NEX 545 Penta 56 84102 CCF SAT 103 85620 TAP 620 97
27880 SDM 7000 + 38 39580 NEX 545 Tricanal 56 84104 CCF SAT N 103 85625 TAP 625 97
27895 SDM 7000 + ST 40 66002 SPS 6000 N 47 84111 CCF TRA 103 85800 SPT 815 97
35004 AFM 6000 43 66003 SPS 6100 + 48 84121 CCF TRN 103 85815 TAP 815 97
35005 AFM 7000 43 66105 FA 802 N 86 84127 CCF 017 103 85820 TAP 820 97
35016 SHA 6115 N 44 67002 SPS 7000 N 47 84129 CCF 020 103 85825 TAP 825 97
35017 SHA 7115 N 44 67003 SPS 7100 + 48 84133 CCF SAT H 103 86064 PO 064 17
35018 SAC 6415 N 44 69523 SPS 523 58 84337 FAN 4337 12 86081 PO 081 17
35018 SAC 7415 N 44 80003 AN 03-3 10 84351 FAN 4351 12 86101 PPS 100 21
35252 SAB 252 67 80004 AN 03-4 10 84369 FAN 4369 12 86102 PPS 806 21
35301 SAB 301 68 80007 AN 07 10 84372 Min@ 15 86103 PML 32 21
35302 SAB 301- A 68 80020 AN 02 11 84375 Di@na G69 13 86104 PPA 200 21
35304 SAB 304 68 80022 FM “S” 11 84377 Di@na G 69 6 u. 13 86105 DPO 105 17
35402 SAB 402 68 80023 ANT DAB 11 84380 Digit 45 16 86106 SPU 40 21
35404 SAB 404 68 80337 FAN 10337 12 84381 Digit 6u 16 86129 LNB 201 19
35415 SAB 401 68 80351 FAN 10351 12 84382 Digit 75 16 86131 LNB 204 19
35465 MICROMATVplus 65 80369 FAN 10369 12 84385 aktive 14 86164 Kit PO 064 18
35467 MICROMATVplus N 65 81369 FAN 1369 12 84386 Di@na G 69 aktive 6 u 13 86181 Kit PO 081 18
35491 MICROMATV 67 82369 FAN 2369 12 84387 Di@na G 69 aktive 13 86204 BSD 203 DC 101
35549 MICROMATV futura 300 63 82401 PNT 15 22 85001 MB 021 106 86205 BSD 203 N 101
35550 MICROMATV futura 200 63 82402 PNT 25 22 85002 DB 012 106 86211 BSD 210 DC 101
35551 MICROMATV futura 100 63 82403 TRT 25 22 85003 IC 001 106 86215 BSD 215 N 101
35552 MICROMATV futura 200 C 62 82405 BTR AT 23 85005 AT 323 106 86218 BSD 201 S 101
35553 MICROMATV futura 300 C 62 82406 BTR EM 23 85008 ECU 06 102 86219 BSD 210 N 101
35580 MICROMATV futura 100 C 62 82407 BTR AB 23 85009 ECU 09 102 86220 BSD 220 N 101
35904 IFA 2000 N 73 82408 ANC VT 24 85010 RC 075 107 86221 BSD 201 SDC 101
35914 IFA 6000 S 46 82409 ARG V40 24 85012 ECU 12 102 86230 C BSD 101
35915 IFA 7000 S 46 82410 ARG V35 24 85014 PE DES N 96 86231 C BSD B 101
35920 DA 353 71 82411 CBL AC3 23 85015 ECU 15 102 86242 DXR 2D 98
35922 DA 353 A 71 82414 MST 430 25 85018 ECU 18 102 86245 DXR 216 99
35924 DA 354 83 82415 MST 315 25 85020 SS BT 100 86246 AL 46 20
35925 DA 354 A 83 82416 MST 325 25 85023 FT 130 F 69 86334 DXR 334 99
35930 WBA 433 71 82418 BTJ 035 26 85027 AB 012 T 69 86504 DiSAT 6U 54
35930 WBA 433 A 71 82419 ACH 045 26 85028 MD 012 F 106 86506 DiSAT 6V 54
35934 D WBA 415 72 82421 GRM A20 27 85030 FT 110 F 107 86507 Tedi 200 74
35945 HA 405 71 82422 GRM U30 27 85031 SS BT B 100 86515 MOD 500 92
36010 AMB 810 84 82423 GRM U50 27 85033 C BIF 100
36020 AMB 820 84 82425 BRI D68 28 85034 C BIF B 100
36023 AMB 823 84 82426 BRI S68 28 85041 FAT 010 106
36024 AMB 824 84 82427 TNS 106 23 85042 FPA 470 107
36030 AMB 830 84 82428 GRP 001 26 85050 ATF 020 69
36031 AMB 831 84 82429 APR 035 26 85051 ICF 001 60
36032 AMB 832 84 82434 GRP AT 27 85052 FTF 245 69
36034 AMB 834 85 82435 GRE AT 27 85053 ABF 012 60
PRODUCT
121
P.V.P.: 5,00
JJK/FAGOR • GENERAL CAT. 09-10 • GB • ABRIL 2009
Ref: 9I083
www.fagorelectronica.com