Professional Documents
Culture Documents
CONTROLLER
FOR GFX AND XCN DISPLAY SYSTEMS
CABLING GUIDE
Version 1.00
Revision A
November 2019
Corporate Office
Legal Notices
© 2019, Trimble Inc. All rights reserved.
Trimble, the Globe & Triangle logo, EZ-Pilot, EZ-Steer, and FmX
are trademarks of Trimble Inc., registered in the United
States and in other countries.
Autopilot, Field-IQ, GFX-350, GFX-750, NAV-500, XCN-750, and
XCN-1050 are trademarks of Trimble Inc.
All other trademarks are the property of their respective
owners.
Release Notice
This is the November 2019 release (Revision A) of the NAV-
500 Guidance Controller for GFX/XCN Display Systems
Cabling Guide.
2 Cabling Diagrams 5
Basic setup (manual guidance) 6
EZ-Steer with NAV-500 Guidance controller 7
EZ-Pilot with NAV-500 Guidance controller 9
EZ-Pilot Pro with IMD-900 and NAV-500 Guidance controller 11
Field-IQ 13
Field-IQ – Full harness 15
ISOBUS Universal Terminal – In-cab connector 17
ISOBUS Universal Terminal – In-cab connector with switch boxes 19
ISOBUS Universal Terminal – Full harness 21
ISOBUS Universal Terminal with switch boxes 23
Expansion Port Basic Cable 25
Expansion Port Multi-Use Cable 26
Radar and serial/TUVR adapters 27
Technical assistance
Go to the Guidance & Steering webpage on the Trimble website
(agriculture.trimble.com/precision-ag/products/displays/) for the latest support
information, including:
l support notes detailing support issues
l documentation, including safety and compliance
l the latest files available for download
Additional help
If you still cannot find the information that you need, contact your Trimble reseller.
c
d
e
5 Pin B code 4 Pin D code
f
to Battery
g
c
i
g
to Battery
3 EZ-Steer® T2 controller
4 EZ-Steer motor
d e
c h i
j
n
k
to Battery
m
l
3 SAM-200 motor
6 Sonalert 43104
c d
f e
g h
j
to Battery
for port
expansion
k
Sonalert
NMEA
OUT
Remote
engage
l m
Field-IQ
d
e
g h i
to Battery
j
to FIQ
implement
d
e
g h i
to Battery
j R1 CAN k
P2 pwr
R2 pwr
P1 CAN
Powell
connector
P1 pwr
l R1 pwr P1 pwr
m n
g h to Battery
i to ISO
implement
c
d
e
j
f g
to Battery
to ISO
implement
l
k
d
e
g h i
to Battery
j R1 CAN k
P2 pwr
R2 pwr
P1 CAN
Powell
connector
P1 pwr
l R1 pwr P1 pwr
m n
c
d
e
g h
to Battery
f
j
k
i
l
R2 pwr
P1 CAN
m
P1 pwr n R1 pwr P1 pwr o p
12 Powell Connector
c
d
e
5 Pin B code 4 Pin D code
f
g
to Battery
h
To TUVR or
Imp Switch or
Radar Out
e
5 Pin B code 4 Pin D code
I/O (Radar,
Imp lift swt) h
Analog f i
Camera g
to Battery
I/O (Radar,
Imp lift swt)
TUVR and
Serial Rate controllers
fuse
Power
Raven 69729
Vaderstad 428017
Bogballe 59043
NOTE – These adapters integrate with the DB9 port on the Expansion Port Multi-Use Cable (P/N
114078).