Professional Documents
Culture Documents
HA2625 - Operational Amplifier
HA2625 - Operational Amplifier
S E M I C O N D U C T O R
HA-2625
100MHz, High Input Impedance, Very Wideband,
November 1996 Uncompensated Operational Amplifiers
Features Description
• Gain Bandwidth Product (AV ≥ 5) . . . . . . . . . . . 100MHz HA-2620/2622/2625 are bipolar operational amplifiers that
• High Input Impedance . . . . . . . . . . . . . . . . . . . . . 500MΩ feature very high input impedance (500MΩ, HA-2620)
• Low Input Bias Current . . . . . . . . . . . . . . . . . . . . . . .1nA coupled with wideband AC performance. The high
resistance of the input stage is complemented by low offset
• Low Input Offset Current. . . . . . . . . . . . . . . . . . . . . .1nA
voltage (0.5mV, HA-2620) and low bias and offset current
• Low Input Offset Voltage . . . . . . . . . . . . . . . . . . . .0.5mV (1nA, HA-2620) to facilitate accurate signal processing. Input
• High Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150kV/V offset can be reduced further by means of an external nulling
• Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35V/µs potentiometer. The 100MHz gain bandwidth product (HA-
• Output Short Circuit Protection 2620/2622/2625 are stable for closed loop gains greater
than 5), 35V/µs slew rate and 150kV/V open loop gain
Applications enables HA-2620/2622/2625 to perform high gain
amplification of very fast, wideband signals. These dynamic
• Video and RF Amplifier
characteristics, coupled with fast settling times, make these
• Pulse Amplifier amplifiers ideally suited to pulse amplification designs as
• Audio Amplifiers and Filters well as high frequency (e.g., video) applications. The
• High-Q Active Filters frequency response of the amplifier can be tailored to exact
• High Speed Comparators design requirements by means of an external bandwidth
control capacitor connected from the Comp pin to GND.
• Low Distortion Oscillator
In addition to its application in pulse and video amplifier
Ordering Information designs, HA-2620/2622/2625 is particularly suited to other
high performance designs such as high-gain low distortion
PART NUMBER TEMP. PKG.
(BRAND) RANGE (oC) PACKAGE NO.
audio amplifiers, high-Q and wideband active filters and
high-speed comparators. For more information, please refer
HA2-2620-2 -55 to 125 8 Pin Metal Can T8.C to Application Notes AN509, AN519 and AN546.
HA2-2622-2 -55 to 125 8 Pin Metal Can T8.C
The HA-2620 and HA-2622 are both offered as /883 Military
HA2-2625-5 0 to 75 8 Pin Metal Can T8.C Grade with the HA-2622 also available in CLCC packages.
HA3-2625-5 0 to 75 8 Ld PDIP E8.3 MIL-STD-883 data sheets are available upon request. Harris
HA7-2620-2 -55 to 125 8 Ld CERDIP F8.3A AnswerFAX (407-724-7800) Document #3701.
HA7-2622-2 -55 to 125 8 Ld CERDIP F8.3A
HA7-2625-5 0 to 75 8 Ld CERDIP F8.3A
HA9P2625-5 0 to 75 8 Ld SOIC M8.15
(H26255)
HA9P2625-9 -40 to 85 8 Ld SOIC M8.15
(H26259)
Pinouts
HA-2620/22 (CERDIP) HA-2620, HA-2622, HA-2625
HA-2625 (CERDIP, PDIP, SOIC) (METAL CAN)
TOP VIEW TOP VIEW
COMP
BAL 1 8 COMP
8
BAL 1 7 V+
-IN 2 - 7 V+
+
+IN 3 6 OUT -
-IN 2 6 OUT
+
V- 4 5 BAL
+IN 3 5 BAL
4
V-
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures. File Number 2903.2
Copyright © Harris Corporation 1996
3-252
HA-2620, HA-2622, HA-2625
NOTE:
1. θJA is measured with the component mounted on an evaluation PC board in free air.
3-253
HA-2620, HA-2622, HA-2625
±40mV 1V
INPUT INPUT
0V -1V
±200mV +5V
90% 90%
OUTPUT OUTPUT ∆V
10% 10%
0V -5V SLEW RATE
RISE TIME = ∆V/∆t
∆t
NOTE: Measured on both positive and negative transistions from 0V to +200mV and 0V to -200mV at output.
TRANSIENT RESPONSE SLEW RATE
IN
+ OUT V+
- 100kΩ
1.6kΩ
50pF
IN OUT
400Ω BAL
COMP
CC
V-
3-254
HA-2620, HA-2622, HA-2625
Schematic Diagram
COMPENSATION
V+
R1 R2 R3 R4 R5 R6
1K 4.18K 1.56K 1.56K C2 600 30
BAL
BAL 9pF
Q1 Q60
Q39 Q61
Q2 Q40 Q41
Q3 Q38
Q4
Q42 Q59
Q37
Q5 Q6 Q58
Q31 Q36 Q35
Q30 Q43
+INPUT Q7 Q33 Q57
Q29 Q32
Q28
Q11 Q9
Q8 Q44 R18
Q10 Q55 Q54 Q56
Q26 Q25 30
Q13 OUT
Q12 Q17 R17
Q53
Q45 30
Q18 Q27 Q24
Q16
Q15 Q46 Q47
R7 Q52
1.35 R11
Q19 4.0K
R19
2.5K Q21 Q22
RP1 Q23 Q48
R8 Q49
1K Q50
R9 Q51
Q20 R10 R12 R13 R14 R15 R16
4.5K C1
2.0K 1.6K 1.6K 1.6K 800 30
16pF
V-
-INPUT
Typical Applications
2.2kΩ
+15V 2.2kΩ
2.2kΩ
+
3 7
VIN + + HA-2600
6 HA-2620 -
HA-2620 VOUT
+5.0V, 0V - R1 R2
- 8 COMP 10kΩ 100kΩ
2
4 50pF
50pF (NOTE)
4.25V (NOTE)
C
0.01µF
1N916 1N916
VREF 1
-15V f=
OUTPUT 4 (R1 + R2) C ~OUTPUT
3-255
HA-2620, HA-2622, HA-2625
5pF
22Ω 2.2kΩ
-
HA- 2600 VOUT
VIN + 50pF (NOTE)
BW = 1MHz
GAIN = 40dB
15 100
EQUIVALENT INPUT
EQUIVALENT INPUT NOISE (µV)
NOISE vs BANDWIDTH
10
10kΩ SOURCE
RESISTANCE
CURRENT (nA)
5 10
0Ω SOURCE
RESISTANCE
0 OFFSET
-5 1
BIAS
-10 THERMAL NOISE OF
10K RESISTOR
-15 -1
100Hz 1kHz 10kHz 100kHz 1MHz 10MHz
-50 -25 0 25 50 75 100
UPPER 3dB FREQUENCY
TEMPERATURE (oC) LOWER 3dB FREQUENCY = 10Hz
FIGURE 4. INPUT BIAS CURRENT AND OFFSET CURRENT vs FIGURE 5. BROADBAND NOISE CHARACTERISTICS
TEMPERATURE
120
OPEN LOOP VOLTAGE GAIN (dB)
100 1000
INPUT IMPEDANCE (MΩ)
PHASE ANGLE (DEGREES)
0
80 20
800
GAIN
60 60
600
40 PHASE 100
400
20 140
0 200
180
-20 0
10Hz 100Hz 1kHz 10kHz 100kHz 1MHz 10MHz 100MHz -55 -35 -15 5 25 45 65 85 105 125
FREQUENCY TEMPERATURE (oC)
FIGURE 6. OPEN LOOP FREQUENCY RESPONSE FIGURE 7. INPUT IMPEDANCE vs TEMPERATURE, 100Hz
3-256
HA-2620, HA-2622, HA-2625
120
50pF
60
115pF
1V 40
300pF
±20V SUPPLY
1000pF
±15V SUPPLY 20
±10V SUPPLY
0.1V 0
-20
10Hz 100Hz 1kHz 10kHz 100kHz 1MHz 10MHz
FREQUENCY
0.01V
10kHz 100kHz 1MHz 10MHz 100MHz NOTE: External Compensation is required for closed loop gain < 5.
If external compensation is used, also connect 100pF
FREQUENCY
capacitor from output to ground.
FIGURE 8. OUTPUT VOLTAGE SWING vs FREQUENCY FIGURE 9. OPEN LOOP FREQUENCY RESPONSE FOR
VARIOUS VALUES OF CAPACITORS FROM COMP.
PIN TO GND
20 120
-55oC to 125oC
±20V SUPPLY
COMMON MODE RANGE (±V)
15
±15V SUPPLY
GAIN (dB)
±10V SUPPLY
100
10
±5V SUPPLY
5
80
5 10 15 20 -55 -35 -15 5 25 45 65 85 105 125
SUPPLY VOLTAGE (±V) TEMPERATURE (oC)
FIGURE 10. COMMON MODE VOLTAGE RANGE vs SUPPLY FIGURE 11. OPEN LOOP VOLTAGE GAIN vs TEMPERATURE
VOLTAGE
1000 10
INPUT NOISE CURRENT (pA/√Hz)
INPUT NOISE VOLTAGE (nV/√Hz)
1 0.01
1 10 100 1K 10K 100K
FREQUENCY (Hz)
3-257
HA-2620, HA-2622, HA-2625
Die Characteristics
DIE DIMENSIONS: PASSIVATION:
69 mils x 56 mils x 19 mils Type: Nitride (Si3N4) over Silox (SiO2, 5% Phos.)
1750µm x 1420µm x 483µm Silox Thickness: 12kÅ ±2kÅ
Nitride Thickness: 3.5kÅ ±1.5kÅ
METALLIZATION:
TRANSISTOR COUNT:
Type: Al, 1% Cu
Thickness: 16kÅ ±2kÅ 140
BAL
OUT
-IN
+IN
BAL
V-
All Harris Semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Harris Semiconductor products are sold by description only. Harris Semiconductor reserves the right to make changes in circuit design and/or specifications at
any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Harris is
believed to be accurate and reliable. However, no responsibility is assumed by Harris or its subsidiaries for its use; nor for any infringements of patents or other
rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Harris or its subsidiaries.
S E M I C O N D U C TO R
3-258