AUTOSTRIP MACHINE INSPECTION QC Team Dept Incharge AUTOSTRIP SECTION FORM / CERTIFICATE Verified by Inspec on Date 20/12/22 Mr Lim Machine No ASM38C 1222-01-02 QC Head Project : American Medical Telesis Corpora on Autostrip Machine Specifica on Robot Arm Model Chain Pitch Sprocket Roller Arm Model Frame Colour Machine Type 28 Arm 90 mm 50.8 mm √ MQ Swing Head √ Blue √ New √ 32 Arm 95 mm 60 mm Y-Fork Swing Head Other Recon 38 Arm √ 100 mm √ 42 Arm 110 mm
Welding Pain ng No Rust/Dented 2) Machine Accessories & Parts
Checking Part Quality Quality Surface 2.1) Machine Accessories & Parts Visual Check Side 1 √ √ √ Pain ng No Rust/Damage Side 2 √ √ √ Quality Part Side 3 √ √ √ Item Side 4 √ √ √ Moving Wheels (4 units) √ √ Side 5 √ √ √ Front Drive Sprocket (4 units) & Keyway √ √ Side 6 √ √ √ Main Chain (c/w Rota ng Sha , Bearing & Plate) √ √ Result = PASSED PASSED PASSED S/S Top Cover √ √ Remark = Frame pain ng and welding quality all ok. No rust and S/S Bearing Cover √ √ dented surface found. Result = PASSED PASSED Remark = Frame pain ng and welding quality all ok. No rust and dented surface found. 3) Gripper Arm Set = MQ Type 4) Railway System Part 3.1) Gripper Arm Visual and Appearance Check 4.1) Railway System Part Visual and Appearance Check Welding Pain ng Arm Sets Quan ty Condi on Condi on MQ Arm Parts Railway Parts Quality Quality Centering Block √ √ Gripper Arm Railway √ √ √ MQ Fork √ √ Open Sta on √ √ √ Main Drive U-Housing √ √ Close Sta on √ √ √ Bearing P-Casing √ √ Discharge Sta on √ √ √ Gripper Arm Set (Le & Right) Arm 1 - √ √ Release Sta on √ √ √ Sliding S/S Roller Arm 38 (All √ √ Discharge Sta on Adjuster √ √ √ Housing Plate 38 arms) √ √ Auto Greece Dispancer √ √ √ Puliing Spring Long √ √ Parking Sta on Guide √ √ √ Y-Guide Set √ √ Brush for Greece flow √ √ √ SS Dust Shield √ √ Result = PASSED PASSED PASSED Screws,nuts and small bearing √ √ Remark = Railway System Parts welding, pain ng and condi on all ok. Result = PASSED PASSED Remark = All 38 arms installed ok. No rust part and all arm parts got sufficient quan ty. 5) Whole Parts of Machine 5.1) Final QC Check Screw, nuts and bolt ghtening for Sprocket Allignment Chain Tensioning Check No Corrosion Found (All Parts) sha s, track and arms Check Condi on √ √ √ √ Result = PASSED PASSED PASSED PASSED Remark = All Machine Parts (Machine frame, machine accessories, gripper arm sets and railway system parts) got QC PASSED.