Professional Documents
Culture Documents
XLamp XPE2
XLamp XPE2
Cree LED / 4001 E. Hwy. 54, Suite 2000 / Durham, NC 27709 USA / +1.919.313.5330 / www.cree-led.com
1
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
TABLE OF CONTENTS
Characteristics........................................................................................................................................................................................................ 3
Order Codes Suggested for New Designs - White................................................................................................................................................ 5
Order Codes Suggested for New Designs - Color............................................................................................................................................... 10
Relative Spectral Power Distribution................................................................................................................................................................... 14
Relative Flux vs. Junction Temperature............................................................................................................................................................... 15
Electrical Characteristics - White......................................................................................................................................................................... 16
Electrical Characteristics - Color.......................................................................................................................................................................... 16
Relative Flux vs. Current - White........................................................................................................................................................................... 17
Relative Flux vs. Current - Color........................................................................................................................................................................... 17
Relative Chromaticity vs. Current and Temperature........................................................................................................................................... 18
Typical Spatial Distribution................................................................................................................................................................................... 19
Thermal Design..................................................................................................................................................................................................... 20
Performance Groups - Luminous Flux................................................................................................................................................................. 22
Performance Groups - Radiant Flux..................................................................................................................................................................... 23
Performance Groups - Chromaticity.................................................................................................................................................................... 24
Performance Groups - Dominant Wavelength.................................................................................................................................................... 27
Performance Groups - Peak Wavelength............................................................................................................................................................ 28
Performance Groups - Forward Voltage.............................................................................................................................................................. 28
Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions..................................................................................................... 29
Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions.............................................................................. 30
PC Amber Kit Plotted on the 1931 CIE Curve...................................................................................................................................................... 31
2200 K CCT White Kits Plotted on ANSI Standard Chromaticity Regions......................................................................................................... 32
Standard Chromaticity Kits.................................................................................................................................................................................. 33
Bin and Order Code Formats................................................................................................................................................................................ 34
Reflow Soldering Characteristics......................................................................................................................................................................... 35
Notes..................................................................................................................................................................................................................... 36
Mechanical Dimensions....................................................................................................................................................................................... 38
Tape and Reel........................................................................................................................................................................................................ 40
Packaging.............................................................................................................................................................................................................. 42
Appendix - Order Codes Not For New Designs................................................................................................................................................... 43
2
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
CHARACTERISTICS
Thermal resistance, junction to solder point - royal blue, blue °C/W 5.7
Viewing angle (FWHM) - amber, red-orange, red, photo red degrees 130
ESD withstand voltage (HBM per Mil-Std-883D)- white, royal blue, blue, green V 8000
ESD classification (HBM per Mil-Std-883D) - PC amber, amber, red-orange, red, photo red, far red Class 2
DC forward current - white, green, PC amber, amber, red‑orange, red, photo red, far red mA 1500
Reverse voltage - white, oyal blue, blue, green, PC amber, amber, red-orange, red V 1
3
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
CHARACTERISTICS - CONTINUED
Forward voltage (@ 350 mA, 25 °C) - amber, red-orange, red V 2.18 2.6
Note
• Thermal resistance measurement was performed per the JEDEC JESD51-14 standard. See the Thermal Resistance Measurement
application note for more details.
4
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
The following tables provide order codes for XLamp XP-E2 white LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 34). For definitions of the chromaticity kits, please see the Cree LED’s Standard
Chromaticity Kits section (page 33).
Calculated Minimum
Minimum Luminous Flux @
Chromaticity Luminous Flux (lm)** Order Codes
350 mA
@ 85 °C
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 43.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
• XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
5
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - WHITE (TJ = 85 °C) - CONTINUED
Calculated Minimum
Chromaticity Minimum Luminous Flux @ 350 mA Luminous Flux (lm)** Order Codes
@ 85 °C
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 43.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
• XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
6
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - WHITE (TJ = 85 °C) - CONTINUED
Calculated Minimum
Minimum Luminous
Chromaticity Luminous Flux (lm)** Order Codes
Flux @ 350 mA
@ 85 °C
Flux Flux
Kit CCT Code (lm) @ (lm) @ 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPEBWT-01-0000-
R5 139 161 238 303
00HF6
XPEBWT-01-0000- XPEBWT-L1-0000- XPEBWT-H1-0000-
R4 130 151 223 284
00GF6 00GF6 00GF6
F6 3750 K
XPEBWT-01-0000- XPEBWT-L1-0000- XPEBWT-H1-0000-
R3 122 142 209 266
00FF6 00FF6 00FF6
XPEBWT-L1-0000- XPEBWT-H1-0000-
R2 114 132 195 249
00EF6 00EF6
XPEBWT-01-0000-
R5 139 161 238 303
00HE6
XPEBWT-01-0000- XPEBWT-L1-0000- XPEBWT-H1-0000-
R4 130 151 223 284
00GE6 00GE6 00GE6
E6 3500 K
XPEBWT-01-0000- XPEBWT-L1-0000- XPEBWT-H1-0000-
R3 122 142 209 266
00FE6 00FE6 00FE6
XPEBWT-L1-0000- XPEBWT-H1-0000-
R2 114 132 195 249
00EE6 00EE6
XPEBWT-L1-0000- XPEBWT-H1-0000-
R3 122 142 209 266
00FZ6 00FZ6
XPEBWT-L1-0000- XPEBWT-H1-0000-
Z6 3500 K R2 114 132 195 249
00EZ6 00EZ6
XPEBWT-L1-0000- XPEBWT-H1-0000-
Q5 107 124 183 233
00DZ6 00DZ6
XPEBWT-01-0000-
R5 139 161 238 303
00HF7
XPEBWT-01-0000- XPEBWT-L1-0000- XPEBWT-H1-0000-
R4 130 151 223 284
00GF7 00GF7 00GF7
F7 3250 K
XPEBWT-01-0000- XPEBWT-L1-0000- XPEBWT-H1-0000-
R3 122 142 209 266
00FF7 00FF7 00FF7
XPEBWT-L1-0000- XPEBWT-H1-0000-
R2 114 132 195 249
00EF7 00EF7
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 43.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
• XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
7
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - WHITE (TJ = 85 °C) - CONTINUED
Calculated Minimum
Minimum Luminous
Chromaticity Luminous Flux (lm)** Order Codes
Flux @ 350 mA
@ 85 °C
Flux Flux
Kit CCT Code (lm) @ (lm) @ 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPEBWT-01-0000-
R5 139 161 238 303
00HE7
XPEBWT-01-0000- XPEBWT-L1-0000- XPEBWT-H1-0000-
R4 130 151 223 284
00GE7 00GE7 00GE7
XPEBWT-01-0000- XPEBWT-L1-0000- XPEBWT-H1-0000-
R3 122 142 209 266
00FE7 00FE7 00FE7
XPEBWT-L1-0000- XPEBWT-H1-0000-
E7 3000 K R2 114 132 195 249
00EE7 00EE7
XPEBWT-U1-0000-
Q5 107 124 183 233
00DE7
XPEBWT-U1-0000-
Q4 100 116 171 218
00CE7
XPEBWT-U1-0000-
Q3 93.9 109 161 205
00BE7
XPEBWT-L1-0000- XPEBWT-H1-0000-
R3 122 142 209 266
00FZ7 00FZ7
XPEBWT-L1-0000- XPEBWT-H1-0000-
R2 114 132 195 249
00EZ7 00EZ7
XPEBWT-L1-0000- XPEBWT-H1-0000-
Q5 107 124 183 233
00DZ7 00DZ7
Z7 3000 K
XPEBWT-U1-0000-
Q4 100 116 171 218
00CZ7
XPEBWT-U1-0000-
Q3 93.9 109 161 205
00BZ7
XPEBWT-U1-0000-
Q2 87.4 102 150 191
00AZ7
XPEBWT-L1-0000- XPEBWT-H1-0000-
R3 122 142 209 266
00FF8 00FF8
XPEBWT-L1-0000- XPEBWT-H1-0000-
R2 114 132 195 249
00EF8 00EF8
XPEBWT-L1-0000- XPEBWT-H1-0000-
Q5 107 124 183 233
00DF8 00DF8
F8 2850 K
XPEBWT-U1-0000-
Q4 100 116 171 218
00CF8
XPEBWT-U1-0000-
Q3 93.9 109 161 205
00BF8
XPEBWT-U1-0000-
Q2 87.4 102 150 191
00AF8
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 43.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
• XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
8
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - WHITE (TJ = 85 °C) - CONTINUED
Calculated Minimum
Minimum Luminous
Chromaticity Luminous Flux (lm)** Order Codes
Flux @ 350 mA
@ 85 °C
Flux Flux
Kit CCT Code (lm) @ (lm) @ 700 mA 1.0 A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 90 CRI Minimum
85 °C 25 °C*
XPEBWT-L1-0000- XPEBWT-H1-0000-
R3 122 142 209 266
00FE8 00FE8
XPEBWT-L1-0000- XPEBWT-H1-0000-
R2 114 132 195 249
00EE8 00EE8
XPEBWT-L1-0000- XPEBWT-H1-0000-
Q5 107 124 183 233
00DE8 00DE8
E8 2700 K
XPEBWT-U1-0000-
Q4 100 116 171 218
00CE8
XPEBWT-U1-0000-
Q3 93.9 109 161 205
00BE8
XPEBWT-U1-0000-
Q2 87.4 102 150 191
00AE8
XPEBWT-L1-0000- XPEBWT-H1-0000-
R2 114 132 195 249
00EZ8 00EZ8
XPEBWT-L1-0000- XPEBWT-H1-0000-
Q5 107 124 183 233
00DZ8 00DZ8
XPEBWT-L1-0000- XPEBWT-H1-0000-
Q4 100 116 171 218
00CZ8 00CZ8
Z8 2700 K
XPEBWT-U1-0000-
Q3 93.9 109 161 205
00BZ8
XPEBWT-U1-0000-
Q2 87.4 102 150 191
00AZ8
XPEBWT-U1-0000-
P4 80.6 93.6 138 176
009Z8
XPEBWT-L1-0000- XPEBWT-H1-0000-
Q2 87.4 102 150 191
00AEA 00AEA
XPEBWT-L1-0000- XPEBWT-H1-0000-
EA 2200 K P4 80.6 93.6 138 176
009EA 009EA
XPEBWT-L1-0000- XPEBWT-H1-0000-
P3 73.9 85.8 127 161
008EA 008EA
XPEBWT-L1-0000- XPEBWT-H1-0000-
Q2 87.4 102 150 191
00AZA 00AZA
XPEBWT-L1-0000- XPEBWT-H1-0000-
ZA 2200 K P4 80.6 93.6 138 176
009ZA 009ZA
XPEBWT-L1-0000- XPEBWT-H1-0000-
P3 73.9 85.8 127 161
008ZA 008ZA
Notes:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 43.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
• XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
9
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
The following tables provide order codes for XLamp XP-E2 color LEDs. For a complete description of the order-code nomenclature, please
see the Bin and Order Code Formats section (page 34).
Note:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 43.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements, ±2 on CRI measurements
and ±1 on dominant wavelength measurements. See the Measurements section (page 36).
• XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
10
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - COLOR (TJ = 25 °C) - CONTINUED
Q3 93.9 XPEBPA-L1-0000-00B01
Q5 107 XPEBPA-L1-0000-00D01
Note:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 43.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements, ±2 on CRI measurements
and ±1 on dominant wavelength measurements. See the Measurements section (page 36).
• XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
11
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - COLOR (TJ = 25 °C) - CONTINUED
Note:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 43.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements, ±2 on CRI measurements
and ±1 on dominant wavelength measurements. See the Measurements section (page 36).
• XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
12
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
ORDER CODES SUGGESTED FOR NEW DESIGNS - COLOR (TJ = 25 °C) - CONTINUED
Note:
• For additional order codes NOT recommended for new designs please see the Appendix section starting on page 43.
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements, ±2 on CRI measurements
and ±1 on dominant wavelength measurements. See the Measurements section (page 36).
• XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
13
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
100%
90%
Relative Radiant Power
80%
70%
60%
Cool White
50%
Warm White
40%
30%
20%
10%
0%
380 430 480 530 580 630 680 730 780
Relative Spectral PowerWavelength (nm)
PC Amber from 220823 XPEB+ PCA Datasheet 1.5A Max.xlsx
Photo Red & Far Red from XPEB FR and XPEB PR Updated Datasheet LIVT 1500mA.xlsx
100%
Royal Blue
80%
Blue
Relative Radiant Power
Green
60% PC Amber
Amber
Red-Orange
40%
Red
Photo Red
20% Far Red
0%
380 430 480 530 580 630 680 730 780
Wavelength (nm)
14
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
120%
100%
Relative Luminous Flux
80%
60% White
40%
20%
Relative
0%
Flux Output
25 50 vs. Junction
75 Temperature
100 125 150
Photo Red & Far Red from XPEB FR and XPEB PR Updated Datasheet LIVT 1500mA.xlsx
Junction Temperature (ºC)
120%
100%
Relative Radiant Flux
80%
Royal Blue
40%
20%
0%
Relative Flux
25
Output vs.
50
Junction
75
Temperature
100 125 150
120%
100%
Relative Luminous Flux
80% Blue
Green
60%
PC Amber
40% Amber
Red-Orange, Red
20%
0%
25 50 75 100 125 150
15
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
Electrical Characteristics
ELECTRICAL (Tj = 25ºC) - WHITE (T = 85 °C)
CHARACTERISTICS J
1500
1250
Forward Current (mA)
1000
750 White
500
250
0
2.65 2.75 2.85 2.95 3.05 3.15 3.25 3.35
1500
1250
Royal Blue
Forward Current (mA)
Blue
1000
Green
PC Amber
750
Amber
Red-Orange, Red
500
Photo Red
Far Red
250
0
1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 3.20 3.40 3.60
16
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
300%
250%
Relative Luminous Flux
200%
150% White
100%
50%
0%
0 250 500 750 1000 1250 1500
420%
360%
Relative Radiant Flux
300%
Royal Blue
240%
Photo Red
Far Red
180%
120%
60%
360%
300% Blue
Relative Luminous Flux
Green
240%
PC Amber
180% Amber
Red-Orange, Red
120%
60%
0%
0 250 500 750 1000 1250 1500
17
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
0.020
T = 85 °C
J
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
Relative
-0.020
Chromaticity Vs. Temperature WW
0 250 500 750 1000 1250 1500
Current (mA)
0.020
I = 350 mA
F
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0 25 50 75 100 125 150
Tsp (°C)
18
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
Typical Spatial Radiation Pattern
100%
80%
Relative Luminous Intensity
60%
White
40%
20%
Typical
-90
Spatial
-70
Radiation
-50 -30
Pattern
0%
-10 10 30 50 70 90
PC Amber from 210506 XPEB+ PCA Preliminary Datasheet.xlsx
Angle (°)
100%
80%
Relative Luminous Intensity
20%
0%
-90 -70 -50 -30 -10 10 30 50 70 90
Angle (º)
19
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
Thermal Design - royal blue
White Royal Blue
1600 1600
1400 1400
1000 1000
800 800
600 600
Rj-a = 11°C/W Rj-a = 10°C/W
400
Rj-a = 15°C/W 400
Rj-a = 15°C/W
200 Rj-a = 20°C/W
200 Rj-a = 20°C/W
Rj-a = 25°C/W
0
0 20 40 60 80 100 120 140
Thermal
160
Design
0 -Rj-agreen
= 25°C/W
Blue Green
1600 1600
1400 1400
Maximum Current (mA)
1200 1200
Maximum Current (mA)
1000 1000
800 800
600 600
Rj-a = 10°C/W Rj-a = 10°C/W
400 400
Rj-a = 15°C/W Rj-a = 15°C/W
PC Amber Amber
1600 1600
1400 1400
1200 1200
Maximum Current (mA)
Maximum Current (mA)
1000 1000
800 800
600 600
Rj-a = 10°C/W
Rj-a = 10°C/W
400 400
Rj-a = 15°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 20°C/W 200
200
Rj-a = 25°C/W
Rj-a = 25°C/W
0
0
0 20 40 60 80 100 120 140 160
0 20 40 60 80 100 120 140 160
Ambient Temperature (ºC)
Ambient Temperature (ºC)
20
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
1600 1600
1400 1400
1200 1200
1000 1000
800 800
600 600
Far Red from XPEB FR and XPEB PR Updated Datasheet LIVT 1500mA.xlsx
Far Red
1600
1400
1200
Maximum Current (mA)
1000
800
600
Rj-a = 10°C/W
400
Rj-a = 15°C/W
21
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
XLamp XP-E2 LEDs (except royal blue, photo red and far red) are tested for luminous flux and placed into one of the following luminous‑flux
groups:
K2 30.6 35.2
K3 35.2 39.8
M2 39.8 45.7
M3 45.7 51.7
N2 51.7 56.8
N3 56.8 62.0
N4 62.0 67.2
P2 67.2 73.9
P3 73.9 80.6
P4 80.6 87.4
Q2 87.4 93.9
Q3 93.9 100
Q4 100 107
Q5 107 114
R2 114 122
R3 122 130
R4 130 139
R5 139 148
S2 148 156
S3 156 164
S4 164 172
S5 172 180
22
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
XLamp XP-E2 royal blue LEDs are tested for radiant flux and placed into one the following bins:
36 600 625
37 625 650
38 650 675
39 675 700
40 700 725
XLamp XP-E2 photo red LEDs are tested for radiant flux and placed into one the following bins:
29 425 450
30 450 475
31 475 500
32 500 525
XLamp XP-E2 far red LEDs are tested for radiant flux and sorted into one of the following radiant‑flux bins:
26 350 375
27 375 400
28 400 425
29 425 450
23
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
White XLamp XP-E2 LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the
following pages.
24
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
25
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
26
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
XLamp XP-E2 PC amber LEDs are placed into the region defined by the following bounding coordinates.
Region x y
0.5469 0.4249
0.5700 0.4100
Y2
0.5900 0.4100
0.5610 0.4390
Color XLamp XP-E2 LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins defined below.
D3 450 455
Royal Blue D4 455 460
D5 460 465
B3 465 470
B4 470 475
Blue
B5 475 480
B6 480 485
G2 520 525
Green G3 525 530
G4 530 535
A2 585 590
Amber
A3 590 595
O3 610 615
Red-Orange
O4 615 620
R2 620 625
Red
R3 625 630
27
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
Photo red and far red XLamp XP-E2 LEDs are tested for peak wavelength (PWL) and sorted into one of the PWL bins defined below.
P2 650 655
P3 655 660
Photo Red
P4 660 665
P5 665 670
F2 720 725
F3 725 730
Far Red
F4 730 735
F5 735 740
Amber, red-orange, red, photo red and far red XLamp XP-E2 LEDs are tested for forward voltage and sorted into one of the forward voltage
bins defined below.
Forward Voltage Minimum Forward Voltage (V) Maximum Forward Voltage (V)
Group @ 350 mA @ 350 mA
A 1.5 1.75
B 1.75 2.0
C 2.0 2.25
D 2.25 2.5
E 2.5 2.75
F 2.75 3.0
G 3.0 3.25
H 3.25 3.5
J 3.5 3.75
28
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
0.40 0.40
5000 K
5000 K
0.39 0.39
0.38 5700 K
0.38 5700 K
53
3S 3S
51
0.37 0.37
6500 K 6500 K 2T
2T
0.36 0.36 3B
2S 3B 2S
2C 0.35 2C
0.35 1T 1T
3A 8000 K 3A
8000 K 2B 2B
CCy
0.34 0.34 1S
CCy
1S 2D 1C 2D
1C
3R 2A 3R
2A 0T
0.33 0T 0.33 1B
1B
1D 2U 1D 2U
0S 0C ANSI 0S 0C 2R ANSI
0.32 1A
2R 0.32 1A
1U C78.377A 1U C78.377A
0B 0B
0D 0D
0.31 1R
0.31 1R
0A 0A
0U 0U
0.30 0.30
0R 0R
0.29 0.29
0.28 0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx CCx
0.40
5000 K
0.39
0.38 5700 K
3S
0.37
6500 K 50 2T
0.36 3B
2S
0.35 2C
1T
8000 K 3A
2B
0.34 1S 2D
1C
CCy
2A 3R
0.33 0T
1B
1D 2U
0S 0C 2R ANSI
0.32 1A
1U C78.377A
0B 0D
0.31 1R
0A
0U
0.30
0R
0.29
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
0.40
0.40
5000 K 5000 K
0.39 0.39
0.37
3S
0.37 E2 3S
6500 K 2T 6500 K 2T
0.36 0.36
E1 2S 3B 3B
2S
0.35 2C 2C
1T 0.35 1T
8000 K 3A 3A
2B 8000 K 2B
CCy
CCy
0.34 1S 2D 0.34 1S
1C 1C 2D
2A 3R
0T 2A 3R
0.33 1B 0T
1D 2U 0.33 1B
1D 2U
0S 0C 2R ANSI
0.32 1A 0S 0C 2R ANSI
C78.377A 0.32 1A
1U C78.377A
0B 0D 1U
0.31 0B
1R 0.31 0D
0A 1R
0U 0A
0.30 0U
0R 0.30
0R
0.29
0.29
0.28
0.28
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCx
CCx
29
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
0.46
0.45
2700 K
3000 K
0.44
E8
E7
0.43
3500 K
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2
E6
7B3 8C4
8C1
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
8A3
E5
6B3 7B1 8A2
6C4 7D3
0.40 6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
E4
6D2 7A4
5B2 5C1 6A3 7A1
6D4
5B4 5D3 6A2
0.38 6D1
5B1 5D2 6A4
E3
4C
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43 3500 K
F8
F7
8C3
8C2
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
F6
7B2 8B4
8B1
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40
F5
6B2 7D2 8D4
5C3 6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
CCy
6D3 7D4
0.39 5B3 5C4 6B1
6D2 7A4
7D1
7A1
F4
5B2 5C1 6A3
6D4
5B4 5D3 6A2
0.38 5B1 5D2
6D1
4C 6A4
5A3 5D4 6A1
0.37 4B 5A2 5D1
3C 5A4 ANSI
4D 5A1 C78.377A
0.36 3B
4A
3D
0.35
3A
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
30
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS -
CONTINUED
0.46
0.45
2700 K
3000 K
0.44
Z8
0.43 3500 K
Z7 8C2
8C3
Z6
8B3
8B2
0.42 7C3
4000 K 7C2 8C4
7B3 8C1
7B2 8B4
8B1
Z5
0.41 4500 K 6C3
7C1
7C4
6C2 7B4 8D3
8D2
7B1 8A3
6B3 8A2
6C4 7D3
0.40 5C3 6B2 7D2 8D4
6C1 7A3
7A2 8A4 8D1
5000 K 5C2 6B4 8A1
6D3 7D4
CCy
0.34
0.33
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCx
0.46
0.45
0.44
Y2
CCy
0.43
0.42
0.41
0.40
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
CCx
31
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
0.45
0.44
2700 K
2450 K EA 2200 K
8D2
8A3
8A2
7D3 AA1 AA4 AD1 AD4
0.40
8D4
8D1
8A4
8A1
0.39
0.38
0.37
0.36
0.44
0.45
0.46
0.53
0.54
0.47
0.48
0.49
0.50
0.51
0.52
0.55
CCx
0.45
0.44
2700 K
2450 K ZA 2200 K
8D2
8A3
8A2
7D3 AA1 AA4 AD1 AD4
0.40
8D4
8D1
8A4
8A1
0.39
0.38
0.37
0.36
0.44
0.45
0.46
0.53
0.54
0.47
0.48
0.49
0.50
0.51
0.52
0.55
CCx
32
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
The following table provides the chromaticity bins associated with chromaticity kits.
6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
Cool
6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
White
6500 K E1 1A, 1B, 1C, 1D
5700 K E2 2A, 2B, 2C, 2D
5000 K E3 3A, 3B, 3C, 3D
4750 K F4 3C, 3D, 4A, 4B
33
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
XP-E2 bin codes and order codes are configured in the following manner:
Series Series
XPE = XP-E XPE = XP-E
34
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
In testing, Cree LED has found XLamp XP-E2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a
general guideline, Cree LED recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP Critical Zone
TL to TP
Ramp-up
TL tL
Temperature
Tsmax
Tsmin
ts Ramp-down
Preheat
25
t 25˚C to Peak
Time IPC/JEDEC J-STD-020C
Note: All temperatures refer to topside of the package, measured on the package body surface.
35
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree LED’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Lumen Maintenance
Cree LED now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen
maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree LED’s lumen maintenance testing and
forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive
current affect the LED junction temperature.
Moisture Sensitivity
Cree LED recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to
soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-E2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree LED recommends sealing any unsoldered
LEDs in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product
Ecology section of the Cree LED website.
REACH Compliance
REACH substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency
(ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree LED
representative to insure you get the most up-to-date REACH SVHC Declaration. REACH banned substance information (REACH Article 67)
is also available upon request.
36
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
NOTES - CONTINUED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
37
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
MECHANICAL DIMENSIONS
Thermal vias,
8 if present, are not shown
7 on these drawings. 8 6
7
5
6
4
5
3
3.30
3.45
E
E
R1.53
R1.53
3.45 1.30 0.58 CENTER
3.45 0.58
IS ELECT
TOP VIEW SIDE VIEW ISOLATE
TOPView
Top VIEW Side
SIDE View
VIEW BOTTOM
Side View VIEW
- PC Amber
5 4 3 2 1
D
D SOLDERMASK
MAY BE PRESENT 3.30
CENTER3.30
0.18
PAD
2.26 3.30
0.18
0.43
0.50 0.50
0.43
0.08
ANODE CATHODE
SIDE C SIDE
0.29 TYP
C
3.30 REF.
0.29 TYP
3.30
3.30
3.30
0.18 TYP
3.30
3.30
0.18
0.08
B
1.30 3.30 REF.
0.08
0.50
0.56
A
0.43
0.08
38
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo IS PROHIBITED.
CLD-DS56
WRITTEN PERMISSION OF CREE LED
REV DESCRIPTION
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. © 2021 CreeLED, Inc. a subsidiary C
REV 20
of SMART Global Holdings, Inc. APPLICATION
9 TYP
8 7 6 5 4 2 3
P
OPTICAL MODEL ORIGIN 2.26 3.30 SOLDERMASK
MODEL ORIGIN MAY BE PRESENT
F 0.73 2.30
CATHODE ANODE 0.50 0.50
SIDE SIDE
XLAMP ® XP-E2 LED ANODE CATHODE
SIDE SIDE
3.30
3.45
E
3.30
3.30
0.18
0.56
0.50 0.50 0.50
0.56
0.43
0.08
0.83 (2 PLACES)
C
0.29 TYP
0.18 TYP
3.30
3.30
0.18
0.08
B
Recommended
RECOMMENDED PCB Footprint
PCB FOOTPRINT Recommended StencilOPENING
RECOMMENDED STENCIL Opening
UNLESS OTHERWISE SPECIFIED: NAME DA
DIMENSIONS ARE IN MILLIMETERS
TOLERANCES: DRAWN TLING 24AU
• ANGULAR: MACH 0.5° BEND 1°
• ONE PLACE DECIMAL 0.5 CHECKED
• TWO PLACE DECIMAL 0.05
A • INSIDE BEND RADII EQUAL ENG APPR.
MATERIAL
• MACHINE/CASTING RADII 0.50
• RADII AND DIA: 0.10 MFG APPR.
8 7 6 5 4 2 3 2
39
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
All Cree LED carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
T
Po P2 Do E
Bo
R
W
F
Anode side A A "H"
P1 D1 B Ko
B-B SECTION
Ao (on a place in the
radii)
"I"
Ao
A-A SECTION DETAIL"I" DETAIL"H"
ITEM Ao Bo Ko Po P1 P2 T E
Dim. 3.70 3.70 2.40 4.00 8.00 2.00 0.30 1.75 5.50 1.55 1.50 12.00 5°
ITEM F Do D1 W R
Dim. 5.50 1.55 1.50 12.00 5deg
NOTICE
1) All Cree LED carrier tapes conform to EIA-481D, Automated Component handling Systems Standard
2) Measurement tolerances unless indicated otherwise: .xx = ±.15 mm
40
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
2402-M031 XPGB
XLAMP ® XP-E2 LED
All Cree LED carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
Feed Direction
END START
Feed Direction
Cover Tape
Pocket Tape
13 mm
7.5”
41
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
PACKAGING
42
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 5 for
order codes of XLamp XP-E2 white LEDs that could serve as alternatives for the order codes set forth below.
Minimum
Chromaticity Luminous Flux Order Codes
@ 350 mA
Flux (lm)
Kit CCT Code 70 CRI Typical
@ 85 °C
R4 130 XPEBWT-L1-0000-00G51
R3 122 XPEBWT-L1-0000-00F51
51 6200 K R2 114 XPEBWT-L1-0000-00E51
Q5 107 XPEBWT-L1-0000-00D51
Q4 100 XPEBWT-L1-0000-00C51
R4 130 XPEBWT-L1-0000-00G53
R3 122 XPEBWT-L1-0000-00F53
53 6000 K R2 114 XPEBWT-L1-0000-00E53
Q5 107 XPEBWT-L1-0000-00D53
Q4 100 XPEBWT-L1-0000-00C53
R4 130 XPEBWT-L1-0000-00G50
R3 122 XPEBWT-L1-0000-00F50
50 6200 K R2 114 XPEBWT-L1-0000-00E50
Q5 107 XPEBWT-L1-0000-00D50
Q4 100 XPEBWT-L1-0000-00C50
R4 130 XPEBWT-L1-0000-00GE1
R3 122 XPEBWT-L1-0000-00FE1
E1 6500 K R2 114 XPEBWT-L1-0000-00EE1
Q5 107 XPEBWT-L1-0000-00DE1
Q4 100 XPEBWT-L1-0000-00CE1
R4 130 XPEBWT-L1-0000-00GE2
R3 122 XPEBWT-L1-0000-00FE2
E2 5700 K R2 114 XPEBWT-L1-0000-00EE2
Q5 107 XPEBWT-L1-0000-00DE2
Q4 100 XPEBWT-L1-0000-00CE2
Note:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
43
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 6 for
order codes of XLamp XP-E2 white LEDs that could serve as alternatives for the order codes set forth below.
Minimum Luminous
Chromaticity Order Codes
Flux @ 350 mA
Flux (lm)
Kit CCT Code 70 CRI Typical 75 CRI Typical 80 CRI Minimum
@ 85 °C
R4 130 XPEBWT-01-0000-00GE3
R3 122 XPEBWT-01-0000-00FE3 XPEBWT-L1-0000-00FE3
Q5 107 XPEBWT-L1-0000-00DE3
Q4 100 XPEBWT-L1-0000-00CE3
R3 122 XPEBWT-01-0000-00FF4 XPEBWT-L1-0000-00FF4
R2 114 XPEBWT-01-0000-00EF4 XPEBWT-L1-0000-00EF4
F4 4750 K
Q5 107 XPEBWT-L1-0000-00DF4
Q4 100 XPEBWT-L1-0000-00CF4
R3 122 XPEBWT-01-0000-00FE4 XPEBWT-L1-0000-00FE4
R2 114 XPEBWT-01-0000-00EE4 XPEBWT-L1-0000-00EE4
E4 4500 K
Q5 107 XPEBWT-L1-0000-00DE4
Q4 100 XPEBWT-L1-0000-00CE4
R3 122 XPEBWT-01-0000-00FF5
R2 114 XPEBWT-01-0000-00EF5 XPEBWT-L1-0000-00EF5
Q3 93.9 XPEBWT-L1-0000-00BF5
R3 122 XPEBWT-01-0000-00FE5
R2 114 XPEBWT-01-0000-00EE5 XPEBWT-L1-0000-00EE5 XPEBWT-H1-0000-00EE5
E5 4000 K Q5 107 XPEBWT-01-0000-00DE5 XPEBWT-L1-0000-00DE5 XPEBWT-H1-0000-00DE5
Q4 100 XPEBWT-L1-0000-00CE5 XPEBWT-H1-0000-00CE5
Q3 93.9 XPEBWT-L1-0000-00BE5 XPEBWT-H1-0000-00BE5
Q5 107 XPEBWT-L1-0000-00DZ5 XPEBWT-H1-0000-00DZ5
Z5 4000 K Q4 100 XPEBWT-L1-0000-00CZ5 XPEBWT-H1-0000-00CZ5
Q3 93.9 XPEBWT-L1-0000-00BZ5 XPEBWT-H1-0000-00BZ5
Note:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
44
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 7 -
page 9 for order codes of XLamp XP-E2 white LEDs that could serve as alternatives for the order codes set forth below.
Minimum
Luminous
Chromaticity Order Codes
Flux @
350 mA
Flux
Kit CCT Code (lm) @ 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
85 °C
R2 114 XPEBWT-01-0000-00EF6
Q5 107 XPEBWT-01-0000-00DF6 XPEBWT-L1-0000-00DF6 XPEBWT-H1-0000-00DF6
F6 3750 K Q4 100 XPEBWT-L1-0000-00CF6 XPEBWT-H1-0000-00CF6
Q3 93.9 XPEBWT-L1-0000-00BF6 XPEBWT-H1-0000-00BF6
Q2 87.4 XPEBWT-L1-0000-00AF6 XPEBWT-H1-0000-00AF6
R2 114 XPEBWT-01-0000-00EE6
Q5 107 XPEBWT-01-0000-00DE6 XPEBWT-L1-0000-00DE6 XPEBWT-H1-0000-00DE6
E6 3500 K Q4 100 XPEBWT-L1-0000-00CE6 XPEBWT-H1-0000-00CE6
Q3 93.9 XPEBWT-L1-0000-00BE6 XPEBWT-H1-0000-00BE6
Q2 87.4 XPEBWT-L1-0000-00AE6 XPEBWT-H1-0000-00AE6
Q4 100 XPEBWT-L1-0000-00CZ6 XPEBWT-H1-0000-00CZ6
Z6 3500 K Q3 93.9 XPEBWT-L1-0000-00BZ6 XPEBWT-H1-0000-00BZ6
Q2 87.4 XPEBWT-L1-0000-00AZ6 XPEBWT-H1-0000-00AZ6
R2 114 XPEBWT-01-0000-00EF7
Q5 107 XPEBWT-01-0000-00DF7 XPEBWT-L1-0000-00DF7 XPEBWT-H1-0000-00DF7
F7 3250 K Q4 100 XPEBWT-L1-0000-00CF7 XPEBWT-H1-0000-00CF7
Q3 93.9 XPEBWT-L1-0000-00BF7 XPEBWT-H1-0000-00BF7
Q2 87.4 XPEBWT-L1-0000-00AF7 XPEBWT-H1-0000-00AF7
R2 114 XPEBWT-01-0000-00EE7
Q5 107 XPEBWT-01-0000-00DE7 XPEBWT-L1-0000-00DE7 XPEBWT-H1-0000-00DE7
Q4 100 XPEBWT-L1-0000-00CE7 XPEBWT-H1-0000-00CE7
Q3 93.9 XPEBWT-L1-0000-00BE7 XPEBWT-H1-0000-00BE7
E7 3000 K
Q2 87.4 XPEBWT-L1-0000-00AE7 XPEBWT-H1-0000-00AE7 XPEBWT-P1-0000-00AE7 XPEBWT-U1-0000-00AE7
P4 80.6 XPEBWT-P1-0000-009E7 XPEBWT-U1-0000-009E7
P3 73.9 XPEBWT-P1-0000-008E7 XPEBWT-U1-0000-008E7
P2 67.2 XPEBWT-P1-0000-007E7 XPEBWT-U1-0000-007E7
Q4 100 XPEBWT-L1-0000-00CZ7 XPEBWT-H1-0000-00CZ7
Q3 93.9 XPEBWT-L1-0000-00BZ7 XPEBWT-H1-0000-00BZ7
Q2 87.4 XPEBWT-L1-0000-00AZ7 XPEBWT-H1-0000-00AZ7 XPEBWT-P1-0000-00AZ7
Z7 3000 K
P4 80.6 XPEBWT-P1-0000-009Z7 XPEBWT-U1-0000-009Z7
P3 73.9 XPEBWT-P1-0000-008Z7 XPEBWT-U1-0000-008Z7
P2 67.2 XPEBWT-P1-0000-007Z7 XPEBWT-U1-0000-007Z7
Note:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
45
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
Note:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
46
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 10 for
order codes of XLamp XP-E2 color LEDs that could serve as alternatives for the order codes set forth below.
Note:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
* Calculated Photosynthetic Photon Flux (PPF) and Far-Red Photon Flux (PFFR) values are for reference only.
47
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 11 for
order codes of XLamp XP-E2 color LEDs that could serve as alternatives for the order codes set forth below.
Note:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
* Calculated Photosynthetic Photon Flux (PPF) and Far-Red Photon Flux (PFFR) values are for reference only.
48
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 12 -
page 13 for order codes of XLamp XP-E2 color LEDs that could serve as alternatives for the order codes set forth below.
Note:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
* Calculated Photosynthetic Photon Flux (PPF) and Far-Red Photon Flux (PFFR) values are for reference only.
49
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20
XLAMP ® XP-E2 LED
The following order codes are active and valid order codes, but higher performance options are also available. Please see page 13 for
order codes of XLamp XP-E2 color LEDs that could serve as alternatives for the order codes set forth below.
Note:
• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 36).
* Calculated Photosynthetic Photon Flux (PPF) and Far-Red Photon Flux (PFFR) values are for reference only.
50
© 2012-2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, and XLamp®, and the Cree LED logo CLD-DS56
are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. REV 20