Professional Documents
Culture Documents
11 - Geberit Mapress CuNiFe
11 - Geberit Mapress CuNiFe
299
Geberit MapressCuNiFe
Pipes Fittings
Application purposes Operating temperature Maximum operating pressure
CuNiFe CuNiFe
Liquid media
For cooling water without antifreeze agent 0–70 °C 13 bar / 1300 kPa ü ü
For cooling water with antifreeze agent -30 – +40 °C 13 bar / 1300 kPa ü ü
For service water 0–100 °C 13 bar / 1300 kPa ü ü
For grey and black water with pH value > 6.0 0–100 °C 13 bar / 1300 kPa ü ü
For salt water 0–100 °C 13 bar / 1300 kPa ü ü
For extinguishing water (wet) 0–70 °C 13 bar / 1300 kPa ü ü
For sprinklers (wet) 0–70 °C 13 bar / 1300 kPa ü ü
For mineral oils Upon request Upon request ü ü
For fuels Upon request Upon request ü ü
Gaseous media
For compressed air (oil purity class 0–3) 0–100 °C 10 bar / 1000 kPa ü ü
For compressed air (oil purity class 0–X) 0–100 °C 10 bar / 1000 kPa ü ü
For negative pressure 0–40 °C Abs. ≥ 0.2 bar / 20 kPa ü ü
For inert gases (e.g. nitrogen) 0–100 °C 10 bar / 1000 kPa ü ü
ü Application generally approved if the defined additional requirements are met in accordance with the footnotes
1)
Only use approved antifreeze agents
2)
After Geberit approval
3)
Oil purity class in accordance with ISO 8573-1:2010E; for details on moisture and particles, see technical information "Geberit Piping Systems for Compressed Air Installations"
300
Geberit MapressCuNiFe
CIIR, black FKM, blue EPDM, black FPM, green Centellen® R 3825 Centellen® 3822
ü ü ü
ü 1)
ü ü
ü 2)
ü 2)
ü2)
ü ü ü
ü ü ü
ü ü ü
ü ü ü
ü ü ü
ü 2)
ü 2)
ü2)
ü3) ü
ü 3)
ü 3)
ü
ü ü ü
ü ü ü
301
Geberit MapressCuNiFe
Geberit MapressCuNiFe System pipes 2.1972
d d
Geberit MapressCuNiFe system pipe
L d Z
di s L
Application purposes
• For industry and shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300
Application purposes
• For industry and shipbuilding Characteristics
• Application overview: Geberit MapressCuNiFe → p. 300 • Pressing indicator
• Leaky if unpressed
Characteristics • Seal ring made of CIIR, black
• Seamlessly drawn • Pressing socket with transparent protection plug
• Pipe end with black protective cap
Technical data
Technical data Material CuNi10Fe1.6Mn, material no. 2.1972.11
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Thermal expansion 0.017 mm/(m*K) Art. no. DN d, ø L Z
[mm] [cm] [cm]
Thermal conductivity, pipe 50 W/(m*K)
67002 12 15 4.8 0.8
67004 20 22 5 0.8
Art. no. DN d, ø di, ø s L
[mm] [mm] [mm] [m] 67005 25 28 5.4 0.8
56319 12 15 13 1 6 67006 32 35 6.2 1
56321 20 22 20 1 6 67007 40 42 7.1 1.1
56326 20 22 19 1.5 6 67008 50 54 8.3 1.3
56322 25 28 25 1.5 6 67009 65 76.1 14.1 3.5
56323 32 35 32 1.5 6 67010 80 88.9 16.2 4.2
56324 40 42 39 1.5 6 67011 100 108 19.4 4.4
56325 50 54 51 1.5 6
56327 65 76.1 72.1 2 6
56328 80 88.9 84.9 2 6 Geberit MapressCuNiFe slip coupling
56329 100 108 104 2.5 6
d d
E Z E
L
Application purposes
• For industry and shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300
Characteristics
• Pressing indicator
• Leaky if unpressed
• Seal ring made of CIIR, black
• Pressing socket with transparent protection plug
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Art. no. DN d, ø E L Z
[mm] [cm] [cm] [cm]
67102 12 15 2.5 8 3
67104 20 22 2.5 8.4 3.4
67105 25 28 3 9.1 3.1
67106 32 35 3 10.2 4.2
67107 40 42 4 12 4
67108 50 54 4 14 6
67109 65 76.1 6 23 11
67110 80 88.9 7 26 12
67111 100 108 8 31 15
302
Geberit MapressCuNiFe
Reducers Geberit MapressCuNiFe
Application purposes
• For industry and shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300
Characteristics
• Pressing indicator
• Leaky if unpressed
• Seal ring made of CIIR, black
• Pressing socket with transparent protection plug
303
Geberit MapressCuNiFe
Geberit MapressCuNiFe Bends
Application purposes
Geberit MapressCuNiFe bend 60°
• For industry and shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300
L
Characteristics Z
d
• Pressing indicator
• Leaky if unpressed
Z
• Seal ring made of CIIR, black L
• Pressing socket with transparent protection plug
d
Technical data
Application purposes
Material CuNi10Fe1.6Mn, material no. 2.1972.11
• For industry and shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300
Art. no. DN d, ø L Z
[mm] [cm] [cm] Characteristics
67602 12 15 3.6 1.6 • Pressing indicator
• Leaky if unpressed
67604 20 22 3.2 1.1
• Seal ring made of CIIR, black
67605 25 28 3.7 1.4
• Pressing socket with transparent protection plug
67606 32 35 4.3 1.7
67607 40 42 5.1 2.1 Technical data
67608 50 54 6.2 2.7 Material CuNi10Fe1.6Mn, material no. 2.1972.11
Art. no. DN d, ø H L Z
Characteristics
[mm] [cm] [cm] [cm] • Pressing indicator
67702 12 15 4.5 3.6 1.6
• Leaky if unpressed
• Seal ring made of CIIR, black
67704 20 22 4.4 3.2 1.1
• Pressing socket with transparent protection plug
67705 25 28 5 3.7 1.4
67706 32 35 5.2 4.3 1.7 Technical data
67707 40 42 6.1 5.1 2.1 Material CuNi10Fe1.6Mn, material no. 2.1972.11
304
Geberit MapressCuNiFe
T-pieces Geberit MapressCuNiFe
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Geberit MapressCuNiFe bend 90° with plain end
Art. no. DN d, ø H H1 K K1
d [mm] [cm] [cm] [cm] [cm]
67402 12 15 7 12 2.2 7.2
H
67404 20 22 7 12 0.9 5.9
67405 25 28 8 12 0.7 4.7
d
Z 67406 32 35 12 20 3 11
L 67407 40 42 15 25 4.4 14.4
Characteristics
• Pressing indicator 11.1.5 T-pieces
• Leaky if unpressed
• Seal ring made of CIIR, black Geberit MapressCuNiFe T-piece, equal
• Pressing socket with transparent protection plug
d
Technical data
L1
Material CuNi10Fe1.6Mn, material no. 2.1972.11 Z1
d d
Art. no. DN d, ø H L Z Z Z
[mm] [cm] [cm] [cm] l l
68302 12 15 5.1 3.8 1.8 L
68304 20 22 6 4.7 2.6
Application purposes
68305 25 28 6.6 5.7 3.4 • For industry and shipbuilding
68306 32 35 7.7 6.8 4.2 • Application overview: Geberit MapressCuNiFe → p. 300
68307 40 42 9 8 5
Characteristics
68308 50 54 11.1 10 6.5
• Pressing indicator
68309 65 76.1 16.6 15.7 10.4
• Leaky if unpressed
68310 80 88.9 19.4 18.4 12.4 • Seal ring made of CIIR, black
68311 100 108 24 22.6 15.1 • Pressing socket with transparent protection plug
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Art. no. DN d, ø L L1 l Z Z1
[mm] [cm] [cm] [cm] [cm] [cm]
68002 12 15 6.4 4 3.2 1.2 2
68004 20 22 7.4 4.5 3.7 1.6 2.4
68005 25 28 8.4 5.1 4.2 1.9 2.8
68006 32 35 10 5.9 5 2.4 3.3
68007 40 42 11.4 6.6 5.7 2.7 3.6
68008 50 54 13.8 7.2 6.9 3.4 3.7
68009 65 76.1 23 11 11.5 6.2 5.7
68010 80 88.9 26 12.8 13 7 6.8
68011 100 108 31 15.3 15.5 8 7.8
305
Geberit MapressCuNiFe
Geberit MapressCuNiFe T-pieces
L1
Z1
d d2
Z Z2
l l2
L
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
306
Geberit MapressCuNiFe
T-pieces Geberit MapressCuNiFe
L1
Z1
d d1
Z Z2
l l2
L
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
307
Geberit MapressCuNiFe
Geberit MapressCuNiFe Adapters, permanent
H
Application purposes
L
• For industry and shipbuilding
Application purposes • Application overview: Geberit MapressCuNiFe → p. 300
• For industry and shipbuilding
Characteristics
• Application overview: Geberit MapressCuNiFe → p. 300
• Pressing indicator
Characteristics • Leaky if unpressed
• Pressing indicator • Seal ring made of CIIR, black
• Leaky if unpressed • Pressing socket with transparent protection plug
• Seal ring made of CIIR, black
Technical data
• Pressing socket with transparent protection plug
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11 Art. no. DN d, ø Rp L Z
[mm] ["] [cm] [cm]
Application purposes
• For industry and shipbuilding Application purposes
• Application overview: Geberit MapressCuNiFe → p. 300 • For industry and shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300
Characteristics
• Pressing indicator Characteristics
• Leaky if unpressed • Pressing indicator
• Seal ring made of CIIR, black • Leaky if unpressed
• Pressing socket with transparent protection plug • Seal ring made of CIIR, black
• Pressing socket with transparent protection plug
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Art. no. DN d, ø R H L
[mm] ["] [cm] [cm] Art. no. DN d, ø R H L Z
68833 12 / 15 15 1/2 NPT 4.1 6.1 [mm] ["] [cm] [cm] [cm]
68837 20 22 3/4 NPT 4.2 6.3 67515 12 / 15 15 1/2 7.5 3.8 1.8
68839 32 35 1 1/4 NPT 5.2 7.8 67517 20 22 3/4 8.8 4.7 2.6
308
Geberit MapressCuNiFe
Adapters and connections, detachable Geberit MapressCuNiFe
Geberit MapressCuNiFe bend adapter 90° with 11.1.7 Adapters and connections,
female thread detachable
Rp Geberit MapressCuNiFe adapter union with
Z
L male thread
d
d R
Z1
L1 G
H
Application purposes L
• For industry and shipbuilding
Application purposes
• Application overview: Geberit MapressCuNiFe → p. 300
• For industry and shipbuilding
Characteristics • Application overview: Geberit MapressCuNiFe → p. 300
• Pressing indicator
Characteristics
• Leaky if unpressed
• Pressing indicator
• Seal ring made of CIIR, black
• Leaky if unpressed
• Pressing socket with transparent protection plug
• Union nut made of brass
Technical data • Seal ring made of CIIR, black
Material CuNi10Fe1.6Mn, material no. 2.1972.11
• Flat gasket made of EPDM
• Pressing socket with transparent protection plug
309
Geberit MapressCuNiFe
Geberit MapressCuNiFe Adapters and connections, detachable
di d
H m
Z k
L D
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Accessories
• Geberit flange gasket PN 6 → p. 214
• Geberit bolt set for flange connection, made of CrNi steel → p. 214
di d
H m
Z k
L D
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Accessories
• Geberit flange gasket PN 10/16 → p. 214
• Geberit bolt set for flange connection, made of CrNi steel → p. 214
310
Geberit MapressCuNiFe
Feed-throughs Geberit MapressCuNiFe
h To order additionally
H • Loose flange
Application purposes
Accessories
• For industry and shipbuilding
• Geberit flange gasket PN 10/16 → p. 214
• Application overview: Geberit MapressCuNiFe → p. 300
• Geberit bolt set for flange connection, made of CrNi steel
Characteristics → p. 214
• Suitable for loose flange, in accordance with EN 1092-1,
flange type 02
Technical data
11.1.8 Feed-throughs
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Geberit MapressCuNiFe bulkhead and deck
passing with two plain ends
Art. no. DN d, ø da di, ø D H h PN
[mm] [mm] [mm] [cm] [cm] [cm] [bar] l l
D
68756 20 22 27 19 5 13.5 0.6 6
68757 25 28 32 25 6 13.5 0.6 6 d d
Application purposes
• For industry and shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300
Characteristics
• Suitable for loose flange, in accordance with EN 1092-1,
flange type 02
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
311
Geberit MapressCuNiFe
Geberit MapressCuNiFe, FKM, blue System pipes 2.1972
L
D
11.2.1 System pipes 2.1972
Z
d
Geberit MapressCuNiFe system pipe (FKM, blue)
L1
L d
Application purposes di s
• For industry and shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300
Characteristics
• Pressing indicator Application purposes
• Leaky if unpressed • For shipbuilding
• Protective tube for welding • Application overview: Geberit MapressCuNiFe → p. 300
• Protective tube made of steel 1.0039, coated
Characteristics
• Seal ring made of CIIR, black
• Seamlessly drawn
• Pressing socket with transparent protection plug
• Pipe end with black protective cap
Technical data
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Thermal expansion 0.017 mm/(m*K)
Art. no. DN d, ø D L L1 l1 l2 l3 Z
Thermal conductivity, pipe 50 W/(m*K)
[mm] [cm] [cm] [cm] [cm] [cm] [cm] [cm]
92094 25 28 3.8 5.7 23.4 5 7.9 10.5 3.4
Art. no. DN d, ø di, ø s L
[mm] [mm] [mm] [m]
56319 12 15 13 1 6
Geberit MapressCuNiFe bulkhead and deck 56321 20 22 20 1 6
passing with plain end and T-piece 56326 20 22 19 1.5 6
l1 l2 l3 56322 25 28 25 1.5 6
d D 56323 32 35 32 1.5 6
l 56324 40 42 39 1.5 6
Z d
L
Z 56325 50 54 51 1.5 6
l
56327 65 76.1 72.1 2 6
L1 56328 80 88.9 84.9 2 6
Technical data K
H1
Material CuNi10Fe1.6Mn, material no. 2.1972.11 K1
d
Art. no. DN d, ø D L L1 l l1 l2 l3 Z H
[mm] [cm] [cm] [cm] [cm] [cm] [cm] [cm] [cm] Application purposes
92093 25 28 3.8 8.4 20 4.2 3 12 5 1.9 • For shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300
Technical data
Material CuNi10Fe1.6Mn, material no. 2.1972.11
Art. no. DN d, ø H H1 K K1
[mm] [cm] [cm] [cm] [cm]
67402 12 15 7 12 2.2 7.2
67404 20 22 7 12 0.9 5.9
67405 25 28 8 12 0.7 4.7
312
Geberit MapressCuNiFe
Adapters and connections, detachable Geberit MapressCuNiFe, FKM, blue
To order additionally
h • Loose flange
H
Accessories
Application purposes • Geberit flange gasket PN 10/16 → p. 214
• For shipbuilding • Geberit bolt set for flange connection, made of CrNi steel
• Application overview: Geberit MapressCuNiFe → p. 300 → p. 214
Characteristics
• Suitable for loose flange, in accordance with EN 1092-1, flange
type 02
11.2.4 Feed-throughs
Technical data
Geberit MapressCuNiFe bulkhead and deck
passing with two plain ends (FKM, blue)
Material CuNi10Fe1.6Mn, material no. 2.1972.11
l D l
end, for loose flange PN 1016 (FKM, blue) 92085 40 42 5.4 45 16.5
92086 50 54 7 45 16.5
92087 65 76.1 8.9 45 16.5
h
H
Application purposes
• For shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300
313
Geberit MapressCuNiFe
Accessories for Geberit MapressCuNiFe System seals
Characteristics Characteristics
• LABS-free • LABS-free
Geberit Mapress flat gasket, EPDM, black Geberit Mapress flat gasket, FPM, green
G di D G di D
Z Z
314
Geberit MapressCuNiFe
Sets of bolts for flange connections Accessories for Geberit MapressCuNiFe
Application purposes M m
• For technical building systems, industry and shipbuilding
• Application overview: Geberit MapressCuNiFe → p. 300 L
Technical data
Application purposes
Operating temperature -30 - +180 °C • For flanges made of stainless steel, gunmetal and brass
Material Centellen® HD 3822
Characteristics
• Strength class 8.8, EN 20898-2
Art. no. DN di, ø D Z PN
[mm] [cm] [cm] [bar]
Technical data
91041 15 20 4.4 0.2 6
Material CrNi steel 1.4301 (EN 10088)
91042 20 25 5.4 0.2 6
91043 25 30 6.4 0.2 6 Scope of delivery
91044 32 38 7.6 0.2 6 • Bolt
• 2 washers
91045 40 45 8.6 0.2 6
• Nut
91046 50 57 9.6 0.2 6
91047 65 76 11.6 0.2 6 Art. no. M m L lK
91048 80 89 13.2 0.2 6 [mm] [cm] [cm] [cm]
Technical data
Operating temperature -30 - +180 °C
Material Centellen® HD 3822
315