You are on page 1of 16

K 5.

700

Operating Instructions

Before first use of the unit


Please read these Operat-
ing Instructions and act in
accordance with them

R
e
w gis
w
w. te
ka r a
er n
ch d
er w
.c
omin
! 59639050 (11/10)
More user manuals on ManualsBase.com
2
More user manuals on ManualsBase.com
3
More user manuals on ManualsBase.com
4
More user manuals on ManualsBase.com
Contents

General information . . .6
Proper Use . . .6
Environmental protection . . .6
Warranty . . .6
Symbols in the operating
instructions . . .6
Symbols on the machine . . .6

Safety instructions . . .6

Operation . . .8
Scope of delivery . . .8
Description of the Appliance . . .8
Before Startup . . .9
Water supply . . 10
Start up . . 11
High pressure operation . . 12
Working with detergent . . 12
Interrupting operation . . 12
Finish operation . . 12

Transport . . 13
When transporting by hand . . 13
When transporting in vehicles . . 13

Storage . . 13
Storing the Appliance . . 13
Frost protection . . 14

Maintenance and care . . 14


Maintenance . . 14
Care . . 14
Spare parts . . 14

Troubleshooting . . 15

Technical specifications . . 16

–5
More user manuals on ManualsBase.com
General information
Dear Customer,
Warranty
Please read and comply with
these original instructions prior The warranty terms published by the rele-
to the initial operation of your appliance and vant sales company are applicable in each
store them for later use or subsequent own- country. We will repair potential failures of
ers. your appliance within the warranty period
free of charge, provided that such failure is
Proper Use
caused by faulty material or defects in man-
This high-pressure cleaner is designed for ufacturing. In the event of a warranty claim
domestic use only: please contact your dealer or the nearest
– to clean machines, vehicles, buildings, authorized Customer Service centre.
tools, facades, terraces, garden equip- Please submit the proof of purchase.
ment etc. using a high-pressure water (See address on the reverse)
jet (and detergents if required).
Symbols in the operating
– with accessories, replacement parts
instructions
and detergents approved by
KÄRCHER. Observe the instructions  Danger
provided with these detergents. Immediate danger that can cause severe
Environmental protection injury or even death.
몇 Warning
The packaging material can be recy-
Possible hazardous situation that could
cled. Please do not place the packag-
lead to severe injury or even death.
ing into the ordinary refuse for disposal, but
arrange for the proper recycling. Caution
Old appliances contain valuable ma- Possible hazardous situation that could
terials that can be recycled. Please lead to mild injury to persons or damage to
arrange for the proper recycling of old property.
appliances. Please dispose your old appli- Symbols on the machine
ances using appropriate collection sys-
tems. – High-pressure jets can be
Notes about the ingredients (REACH) dangerous if improperly
You will find current information about the used. The jet must not be
ingredients at: directed at persons, ani-
http://www.karcher.de/de/unternehmen/ mals, live electrical equipment or at the
umweltschutz/REACH.htm appliance itself.
– Frost can destroy the not completely
drained appliance. Store the appliance
in a frost resistant room during winter.

–6
More user manuals on ManualsBase.com
Safety instructions
 Danger or undiluted acids and solvents! This in-
 Never touch the mains plug and the cludes petrol, paint thinner and heating
socket with wet hands. oil. The spray mist thus generated is
 The appliance must not be used if the highly inflammable, explosive and poi-
power cord or important parts of the ap- sonous. Do not use acetone, undiluted
pliance, e.g. high-pressure hoses, trig- acids and solvents as they are damag-
ger gun or safety devices are damaged. ing to the materials from which the ap-
pliance is made.
 Check the power cord and mains plug
for damage before every use. If the 몇 Warning
power cord is damaged, please arrange  The mains plug and the coupling of an
for it to be replaced immediately by an extension cable must be watertight and
authorised repair agent or a skilled must never lay in the water.
electrician  Unsuitable extension cables can be
 Check the high-pressure hose for dam- hazardous. Only use extension cables
age before every use. Please arrange outdoors which have been approved for
for the immediate replacement of a this purpose and labelled with a suffi-
damaged high-pressure hose. cient cable cross-section: 1 - 10 m: 1.5
 The appliance may not be used in areas mm2; 10 - 30 m: 2.5 mm2
where a risk of explosion is present.  Always fully unroll electrical cables from
 If the appliance is used in hazardous ar- the cable drum.
eas (e.g. filling stations) the corre-  High-pressure hoses, fixtures and cou-
sponding safety provisions must be plings are important for the safety of the
observed. appliance. Only use high-pressure hos-
 High-pressure jets can be dangerous if es, fixtures and couplings recommend-
improperly used. The jet must not be di- ed by the manufacturer.
rected at persons, animals, live electri-  This appliance is not intended for use
cal equipment or at the appliance itself. by persons with reduced physical, sen-
 The high-pressure jet must not be di- sory or mental capabilities.
rected at other persons or directed by The appliance must not be operated by
the user at him/herself to clean clothing children or persons who have not been
or footwear. instructed accordingly.
 Never use the appliance to clean ob- Children should be supervised to pre-
jects containing hazardous substances vent them from playing with the appli-
(e.g. asbestos). ance.
 Vehicle tyres or tyre valves are suscep- Keep packaging film away from children
tible to damage from the high-pressure - risk of suffocation!
jet and may burst. The first indication of  The operator must use the appliance
this is a discolouration of the tyre. Dam- correctly. When working with the appli-
aged vehicle tyres/tyre valves are high- ance, he must consider the local condi-
ly dangerous. Ensure that a distance of tions and pay due care and attention to
at least 30 cm is observed when clean- other persons, in particular children,
ing with the jet! who are nearby.
 Risk of explosion!  Do not use the appliance when there
Do not spray flammable liquids. are other persons around unless they
Never draw in fluids containing solvents are also wearing safety equipment.

–7
More user manuals on ManualsBase.com
 Wear protective clothing and safety
Safety Devices
goggles to protect against splash back
containing water or dirt. Caution
Caution Safety devices protect the user and must
 In case of extended downtimes, switch not be modified or bypassed.
the appliance off at the main switch / ap- Power switch
pliance switch or remove the mains The appliance switch prevents unintention-
plug. al operation of the appliance.
 Do not operate the appliance at temper- Lock trigger gun
atures below 0 °C. This lock locks the lever of the trigger gun
 Observe a distance of at least 30 cm and prevents the inadvertent start of the ap-
when using the jet to clean painted sur- pliance.
faces to avoid damaging paintwork.
Overflow valve with pressure switch
 Never leave the appliance unattended
The overflow valve prevents the permissi-
when it is in operation.
ble working pressure from being exceeded.
 Make sure that the power cable or ex- If the lever on the trigger gun is released
tension cables are not damaged by run- the pressure switch turns off the pump, the
ning over, pinching, dragging or similar. high-pressure jet is stopped. If the lever is
Protect the power cable from heat, oil, pulled the pump is turned on again.
and sharp edges.
 All current-conducting parts in the work- Prerequisites for the appliance's
ing area must be protected against jet stability
water.
Caution
 The appliance may only be connected
Create stability for the appliance prior to all
to an electrical supply which has been
work on or with the appliance to prevent ac-
installed in accordance with IEC 60364.
cidents or damage.
 The appliance may only be connected
– The stability of the appliance is warrant-
to alternating current. The voltage must
ed when it is placed onto an even sur-
correspond with the type plate on the
face.
appliance.
 For safety reasons, we recommend that
you operate the appliance only via a
earth-leakage circuit breaker (max.
30 mA).
 Cleaning operations which produce oily
waste water, e.g. engine washes, un-
derbody washes, may only be carried
out using washing stations equipped
with an oil separator.
 This appliance was designed to be
used with detergents which are sup-
plied or recommended by the manufac-
turer. The use of other detergents or
chemicals may compromise the safety
of the appliance.

–8
More user manuals on ManualsBase.com
Operation
Scope of delivery Before Startup
The scope of delivery of your appliance is il- Mount loose parts delivered with appliance
lustrated on the packaging. Check the con- prior to start-up.
tents of the appliance for completeness Install wheels
when unpacking.  Illustration
In the event of missing accessories or any Push the wheels into the intake and se-
transport damage, please contact your cure them with the plugs. Align the plug
dealer. properly.
Description of the Appliance Install the storage for hand-spray gun
Illustrations on fold-out page!  Illustration
1 Coupling element for water Place the bottom holder into the recess-
connection es and push forward until it audibly
2 Water connection with integrated sieve locks in.
3 Appliance switch "0/OFF“/ „I/ON“ Insert the top holder and push down all
4 High pressure hose the way.
5 Dosage regulator for detergent Install the storage hook for the mains
6 Storage for trigger gun connection cable
7 High-pressure hose drum  Illustration
8 Transport handle Press in the storage hook and lock it
9 Hand crank for hose drum into the top position.
10 Storage of detergent reservoir with de- Install the transport handle
tergent connection You will need the 2 included screws as well
11 Storage for accessories as a Philips screwdriver PH 2.
12 Storage hook for mains connection ca-  Illustration
ble Slide the transport handle into the guide
13 Mains cable with mains plug and secure it with 2 screws.
14 Detergent reservoir with locking lid Install the dosage regulator for detergent
15 Wheels You will need the 2 included screws as well
16 Trigger gun as a Philips screwdriver PH 2.
17 Lock trigger gun  Illustration
18 Key to detach the high pressure hose Insert both detergent hoses onto the
from the trigger gun hose fittings.
19 Spray lance with pressure regulation Install the dosage regulator and con-
(Vario Power) nect using 2 screws.
20 Spray lance with Dirtblaster Note: During installation you must
Special accessories make sure that the tongues of the dos-
Special accessories expand the possibili- age regulator match up with the intend-
ties of using your appliance. Please contact ed recesses in the casing.
your KÄRCHER dealer for further informa-
tion.

–9
More user manuals on ManualsBase.com
Install the high pressure hose drum Water supply from mains
 Illustration Observe regulations of water supplier.
Slide the free end of the coiled high For connection values, see type plate/tech-
pressure hose through the recesses on nical data.
the dosage regulator.  Use a fibre-reinforced water hose (not
Insert the hose drum into the intakes on included) with a standard coupling.
the transport handle. (Minimum diameter 1/2 inch (13 mm),
Insert the axle of the hand crank into the minimum length 7.5 m).
guides.  Illustration
Install the fixating plate and secure it Screw the supplied coupling element to
using 2 screws. the water connection on the appliance.
Press the connecting fitting from the Push the water supply hose onto the
short high pressure hose into the brass coupling unit, then connect it to the wa-
intake, secure with clamps. ter supply.
Note: Make sure the connection nipple How to draw water from a bucket when
is aligned correctly. using a KÄRCHER Pressure Cleaner
Connect the high pressure hose to the KÄRCHER recommends using the suction
hand spray gun hose accessory (sold separately) Order no.
 Illustration 9.505-779.0.
Push the high pressure hose into the STEP 1:
trigger gun until it locks audibly.  Connect the suction hose to the water
inlet on the pressure cleaner and drop
Note: Make sure the connection nipple
the other end into a bucket.
is aligned correctly.
Tip: If you are not using this accessory, coil
Check the secure connection by pulling
a hose into the bucket and ensure that you
on the high pressure hose.
only use a standard hose clamp to connect
Water supply to the pressure washer.
CLICK FITTINGS MUST NOT BE USED!
몇 Warning
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water
flowing through a system separator is con-
sidered non-drinkable. STEP 2:
Caution  Fill up your bucket with water.
Always connect the system separator to
the water supply, never directly to the appli-
ance!
Note: Impurities in the water can damage
the high-pressure pump and accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.

– 10
More user manuals on ManualsBase.com
STEP 3: Note: If the hand crank is in its secured
 Connect the KÄRCHER power cord to position, fold it up first.
an electricity source and turn on at pow-  Completely open the water tap.
erpoint. Make sure the high pressure  Insert the mains plug into the socket.
nozzle is not connected and turn the  Turn on the appliance “I/ON”.
unit on at the ON/OFF switch. Press the
trigger on the gun - the unit is ready for High pressure operation
use once there is a constant water sys- 몇 Danger
tem.
The trigger gun is subjected to a recoil force
when the water jet is discharged. Make
sure that you have a firm footing and are
also holding the trigger gun and spray lance
firmly.
Caution
Prior to cleaning, make sure that the high
pressure is placed safely on level ground.
Wear protective goggles and protective
STEP 4: clothing during the cleaning process.
 Connect the high pressure nozzle and  Unlock the lever on the trigger gun.
press the hand trigger to begin clean-  Pull on the lever of the trigger gun; the
ing. device will switch on.
Note: Release the lever of the trigger gun;
the device will switch off again. High pres-
sure remains in the system.
Spray lance with pressure regulation
Carrying out the most common cleaning
tasks. The work pressure can be stageless-
ly regulated between "Min" and "Max".
 Release the lever on the trigger gun.
 Turn the spray lance to the desired po-
sition.
Start up
Note: Suitable for working with detergent;
Caution for this, turn the spray lance to the "Mix" po-
Dry runs lasting longer than two minutes sition.
lead to damages to the high pressure Spray lance with Dirtblaster
pump. If the appliance does not build up For particularly dirty items or areas.
pressure within two minutes, switch it off Caution
and proceed as instructed in the Chapter
Car tyres, paint or sensitive surfaces such
"Troubleshooting".
as wood should not be cleaned with the dirt
 Illustration
blaster, as there is a risk of damage.
Push the spray lance into the trigger
– Not suitable for use with detergents.
gun and fasten it by turning it through
90°.
 Illustration
Unwind the high pressure hose from the
hose drum. Hold on to the transport
handle during this procedure.
– 11
More user manuals on ManualsBase.com
Working with detergent Finish operation
Please use exclusively KÄRCHER deter- Caution
gents and care products to carry out the re- Only separate the high-pressure hose from
spective cleaning task, as these were the trigger gun or the appliance while there
specifically developed for your appliance. is no pressure in the system.
The use of other detergents and care prod-  Remove the detergent reservoir from
ucts may lead to premature wear and can the intake and close it with the lid. To
invalidate your warranty claims. Please ob- store, place into the intake rotated by
tain information at your local dealer or re- 180°.
quest information directly from KÄRCHER.  Release the lever on the trigger gun.
Notes regarding the detergent: The most
 Turn off the appliance "0/OFF".
commonly use detergents can be pur-
 Turn off tap.
chased ready to use in their detergent res-
ervoirs with locking lids. This will make the  Detach the appliance from the water
pesky refilling and filling processes redun- supply.
dant. Caution: When disconnecting the sup-
 Illustration ply or high pressure hose, warm water
Remove the lid from the detergent res- may leak from the connections after op-
ervoir and press the detergent reservoir eration.
into the detergent connection with the  Press the lever on the trigger gun to re-
opening facing down. lease any remaining pressure in the
 Illustration system.
Adjust the suction volume of the deter-  Lock the lever on the trigger gun.
gent solution by means of the dosage  Pull out the mains plug.
regulator for detergents.
 Use spray lance with pressure regula- Transport
tion (Vario Power).
 Turn the spray lance to "Mix" position. Caution
Note: This will mix the detergent with In order to prevent accidents or injuries,
the water stream. keep in mind the weight of the appliance
Note: If required, the washing brushes can during transport (see Specifications).
be used to work with detergent. When transporting by hand
Recommended cleaning method
 Lift appliance by the carrying handle
 Spray the detergent sparingly on the and carry it.
dry surface and allow it to react, but not
 Pull the appliance by its transport han-
to dry.
dle.
 Spray off loosened dirt with the high-
pressure jet. When transporting in vehicles
Interrupting operation  Prior to horizontal transport: Remove
the detergent reservoir from the intake
 Release the lever on the trigger gun. and close it with the lid.
 Lock the lever on the trigger gun.  Secure the appliance against shifting
 During longer breaks (more than 5 min- and tipping over.
utes), also turn the appliance off using
the "0/OFF" switch.
 Insert the trigger gun in its holder.

– 12
More user manuals on ManualsBase.com
Storage Maintenance and care
Caution  Danger
In order to prevent accidents or injuries, Turn off the appliance and remove the
keep in mind the weight of the appliance mains plug prior to any care and mainte-
when selecting a storage location for it (see nance work.
Specifications).
Maintenance
Storing the Appliance
The appliance is maintenance-free.
 Park the machine on an even surface.
Care
 Illustration
Wind the entire high pressure hose onto Prior to longer periods of storage, e.g. in
the hose drum by rotating the hand the winter:
crank counter-clockwise.  Completely drain all water from the ap-
 Insert the hand spray gun with the spray pliance:
lance into the holder for the hand spray (for a description, see section on "Frost
gun. protection")
 Stow away the mains cable and acces-  Illustration
sory at the machine. Store the appli- Pull out the sieve in the water connec-
ance in a dry room. tion using flat-nose pliers and clean un-
der running water.
Frost protection
Spare parts
Caution
Use only original KÄRCHER spare parts.
Protect the appliance and its accessories
You will find a list of spare parts at the end
against frost.
of these operating instructions.
The appliance and its accessories can get
destroyed through frost if there are any wa-
ter residues in them. To avoid damage to
them:
Completely drain all water from the appli-
ance:
 Detach the appliance from the water
supply.
 Detach spray lance from the trigger
gun.
 Switch the appliance on ("I/ON“), press
the trigger gun lever until no further wa-
ter is discharged (approx. 1 min).
 Turn off the appliance.
 Store the appliance and the entire ac-
cessories in a frost-safe room.

– 13
More user manuals on ManualsBase.com
 Check water flow quantity.
Troubleshooting
Appliance is leaking
You can rectify minor faults yourself with  Slight leakage from the appliance pump
the help of the following overview. is normal. If the leakage increases con-
If in doubt, please consult the authorized tact the authorized customer service.
customer service.
No detergent infeed
 Danger
 Use spray lance with pressure regula-
Turn off the appliance and remove the tion (Vario Power).
mains plug prior to any care and mainte-
Turn the spray lance to "Mix" position.
nance work.
 Check the settings at the dosage regu-
Repair works may only be performed by the
lator for detergent.
authorized customer service.
 Check the detergent suction hose for
Appliance is not running kinks.
 Pull on the lever of the trigger gun; the
device will switch on.
 Check whether the voltage indicated on Technical specifications
the type plate corresponds to the volt-
age of the mains supply.
Power connection
 Check the mains connection cable for
damages. Voltage 240 V
1~50 Hz
Pressure does not build up in the appliance
Connected load 2,1 kW
 Check setting at the spray lance.
 Remove air from appliance before oper- Mains fuse (slow-blow) 10 A
ation. Protective class I
Switch on the appliance without con- Protection class IP X5
nection the HP hose (max. 2 minutes) Water connection
and run it until the water discharging
from the HP outlet is free of bubbles. Max. feed temperature 40 °C
Switch off appliance and reconnect HP Min. feed volume 10 I/min
hose. Max. feed pressure 0,8 MPa
 Check the water supply. Max. Suction height 0,5 m
 Pull out the sieve in the water connec-
Performance data
tion using flat-nose pliers and clean un-
der running water. Working pressure 12,5 MPa
Appliance does not start, motor hums Max. permissible pressure 14 MPa
Cause: Voltage reduction due to weak 2030 PSI
mains supply or when using an extension Water flow rate 7,5 I/min
cable.
Detergent flow rate 0 - 0,3 I/min
 When switching on, first pull the lever of
the trigger gun and then switch the ap- Subject to technical modifications!
pliance switch to "I/ON".
Strong pressure fluctuations
 Clean high-pressure nozzle: Remove
dirt and debris from the nozzle bore, us-
ing a needle and rinse through with wa-
ter from the front.

– 14
More user manuals on ManualsBase.com
More user manuals on ManualsBase.com
A FIN N SGP
Alfred Kärcher Ges.m.b.H. Kärcher OY Kärcher AS Karcher Asia Pacific Pte. Ltd.
Lichtblaustraße 7 Yrittäjäntie 17 Stanseveien 31 5 Toh Guan Road East
1220 Wien 01800 Klaukkala 0976 Oslo #01-00 Freight Links
☎ (01) 250 600 ☎ 0207 413 600 ☎ 24 17 77 00 Express Distripark
Singapore 608831
AUS GB NL ☎ 6897-1811
Kärcher Pty. Ltd. Kärcher(UK) Limited Kärcher BV
40 Koornang Road Kärcher House Postbus 474 SK
Scoresby VIC 3179 Beaumont Road 4870 AL Etten-Leur Kärcher Slovakia, s.r.o.
☎ (03) 9765 - 2300 Banbury ☎ 0900-33 444 33 Beniakova 2
Oxon, OX16 1TB 94901 Nitra
B / LUX ☎ 01295 752 200 NZ ☎ 037 6555 798
Kärcher N.V. Karcher Limited
Industrieweg 12 GR 12 Ron Driver Place TR
2320 Hoogstraten Kärcher Cleaning Systems A.E. East Tamaki, Auckland Kärcher Servis Ticaret A.S.
☎ B: 0900 10027 31-33, Nikitara str. & ☎ (09) 274-4603 9 Eylül Mahallesi
LUX: 0032 900 10027 Konstantinoupoleos str. 307 Sokak No. 6
13671 Acharnes P Gaziemir / Izmir
BR ☎ 210 - 2316 153 Neoparts - Com. e Ind. Automóvel, S.A. ☎ (0232) 252-0708
Kärcher Indústria e Comércio Ltda. Av. Infante D. Henrique, Lote 35
Av. Prof. Benedicto Montenegro 419 H 1800-218 Lisboa TWN
CEP 13.140-000 - Paulínia - SP Kärcher Hungária Kft ☎ 21 8558300 Karcher Limited
☎ 0800 176 111 Tormásrét ut 2. 5F/6. No.7
2051 Biatorbágy PL Wu-Chuan 1st Rd
CDN ☎ (023) 530 640 Kärcher Sp. z o.o. Wu-Ku Industrial Zone
Kärcher Canada Inc. Ul. Stawowa 140 Taipei County
6975 Creditview Road Unit #2 HK 31-346 Kraków ☎ (02) 2299-9626
Mississauga, Ontario L5N 8E9 Kärcher Limited ☎ (012) 6397-222
☎ 1-800-465-4980 Unit 10, 17/F. UA
APEC Plaza PRC Kärcher Ukraine
CH 49 Hoi Yuen Road Kärcher Cleaning Systems Co., Ltd. Kilzeva doroga, 9
Kärcher AG Kwun Tong, Kowloon Part B, Building 30, 03191, Kyiv
Industriestraße 16 ☎ (02) 357-5863 No. 390 Ai Du Road ☎ (044) 594 75 75
8108 Dällikon Shanghai Waigaoquiao 200131
☎ 0844 850 863 I ☎ (021) 5046-3579 UAE
Kärcher S.p.A. Karcher FZE
CZ Via A.Vespucci 19 RO Jebel Ali Free Zone
Kärcher spol s r.o. 21013 Gallarate (VA) Karcher Romania s.r.l. RA 8, XB 1, Jebel Ali, Dubai
Modletice č.p. 141 ☎ 848 - 99 88 77 Sos. Odaii Nr. 439 ☎ (04) 8836-776
251 01 Říčany u Prahy 013606 Bucureşti
☎ 0323 606 014 IRL ☎ 0372 709 001 USA
Karcher Limited Alfred Karcher, Inc
D 12 Willow Business Park RUS 2170 Satellite Blvd
Alfred Kärcher GmbH & Co. KG Nangor Road OOO«epxep» Suite 350
Service-Center Gissigheim Clondalkin Dublin 12 109147,Moca Duluth, GA 30097
Im Gewerbegebiet 2 ☎ (01) 409 77 77 y.Taaca , .34,c p.3 ☎ 678-935-4545; 877-527-2437
97953 Königheim-Gissigheim ☎ +7 495 228 39 45
☎ (07195) 903 2065 KOR ZA
Karcher Co. Ltd. (South Korea) S Kärcher (Pty.) Limited
DK Youngjae B/D, 50-1, 51-1 Kärcher AB 144 Kuschke Street
Kärcher Rengøringssystemer A/S Sansoo-dong, Mapo-ku Tagenevägen 31 Meadowdale
Gejlhavegård 5 Seoul 121-060 42502 Hisings-Kärra Edenvale 1614
6000 Kolding ☎ 032-465-8000 ☎ (031) 577-300 ☎ (011) 574-5360
☎ 70 206 667
MAL
E Karcher Cleaning Systems Sdn. Bhd.
Kärcher S.A. No. 8, Jalan Serindit 2
Pol. Industrial Font del Radium Bandar Puchong Jaya
Calle Doctor Trueta 6-7 47100 Puchong, Selangor
08400 Granollers (Barcelona) ☎ (03) 5882 1148
☎ 902 170 068
MEX
F Karcher México, SA de CV
Kärcher S.A.S. Av. Gustavo Baz No. 29-C
5 Avenue des Coquelicots Col. Naucalpan Centro
Z.A. des Petits Carreaux Naucalpan, Edo. de México
94865 Bonneuil-sur-Marne C.P. 53000 México
☎ (01) 43 996 770 ☎ 01 800 024 13 13 08/2009

You might also like