Professional Documents
Culture Documents
NX-01 1000 A English
NX-01 1000 A English
„Admiral“
3 mm 1.8 mm
3 mm
1.8 mm
Navigationlights
11. Install the LED’s into the warp nacelles. After that you can build the model kit ready.
Tips and General Regulations:
→ The general security standards have to be followed. We cannot be hold responsable for damages
caused by improper usage or handling.
→ During the assembling of the model the delievered manual of the manufacturer has to be respected
with priority. The manual for the installation of the illumination only gives instructions to install the
illumination parts.
→ Basically the order of the single steps to install the illumination and to assemble the single parts can
be chosen freely.
→ All of the glued spots should be closed and filled properly to avoid light leaks. For that purpose you
can buy special body filler, but it is also possible to achive the same effect with wood glue.
→ It is recommendable to put bubble wrap behind the clear-sighted parts of the model. This will avoid
that the LEDS will be visible while switched off and will break the light when switched on. You can also
mist up the clear-sighted parts in order to achive the same effect.
→ The LEDs and the wiring should be checked frequently on their functioning during the assembling.
Especially before you have glued and definitely closed the parts.
→ If you use DC you have to bear in mind that the resistances of the LEDs have to be soldered to the
same base to guarantee the functionality of all the LEDs. You also have to consider the + and the –
poles when wiring the LEDs.
→ The illumination set is designed for a 9 – 12 voltage. Every standard power supply unit can be
used.
→ The installation of the position lights and the shuttle illumination is optional.
→ The single parts can vary in form and color from the pictures shown in the manual.
All pictures and descriptions are property of Brainstorm Creative Arts. Duplicating, selling or
dissemination to a third party needs the prior permission of Brainstorm Creative Arts.
If you have any further questions or any problems with our product do not hesitate to contact us
directly at kontakt@bc-arts.de and we will see to your concern as quickly as possible.