Professional Documents
Culture Documents
01 Introduction 009
01 Introduction 009
Introduction
Content
Introduction 1
General ............................................................................................................... 2
Documentation structure ..................................................................................... 3
General
This is the Object description for CEMAT V8.2. It is part of the Reference Manual and it
should support you in performing the work required to configure your plant.
The Reference Manual is part of a comprehensive CEMAT V8.2 documentation which
consists of the volumes below:
Engineering
Manual
Reference Manuals
After the installation of CEMAT V8.2 the CEMAT documentation is available as PDL in
directory D:\CEMAT_CS\Docu
On the following pages you will find the content of each manual.
Documentation structure
The manuals contain the following chapters:
Engineering Manual
1 Introduction
2 Preparations
3 Installation of a PCS 7 Project
4 Assignments
5 Engineering Examples
6 PLC Engineering
7 AS-AS Coupling
8 OS Engineering
9. Engineering Tools
10 Engineering Check List
11 Project Administration
12 free
13 Graphic Templates
14 Tips&Tricks
15 Update Information
Reference - System
1 Introduction
2 Cemat System Architecture
3
4
5
6
Reference - Glossary
1 Introduction
2 Definitions and Instructions
Reference - Objects
1 Introduction
2 General
3 Unidirectional Drive
4 Bi-Directional Drive
5 Damper
6 Valve
7 Adapt
8 Annunciation Module
9. Annunciation Module with 7 Alarms
10 Measuring Value
11 Measured Value Integrator
12 Storage
13 Storage Multichamber
14 Silopilot
15 Group Module
16 Route Module
17 Selection
18 Interlock with 8 inputs
19 Interlock with 4 inputs
20 Interlock
21 Interlock 5
22 Object Data Acquisition
23 PID Controller
24 PID Controller with 3 Parameter sets
25 Polygon 3
26 CNT-Module
27 RT-Module
28 Related Objects
29 Analog Value Selection
30