Professional Documents
Culture Documents
Line Categ JD
Line Categ JD
sales@jiangdong-group.com
www.jiangdong-group.com
CATALOGUE
LINE SYSTEM
Contents
Spacer 03
EIGHT-BUNDLE SPACER DAMPER 04
Vibration Damper 10
BOLTED VIBRATION DAMPER FOR CONDUCTOR 11
Splicing Fittings 15
MID-SPAN JOINT SLEEVE 16
REPAIR ROD 20
REPAIR SLEEVES 21
Protective Fittings 23
ARCING HORN 24
ARCING RING 25
ARMOUR ROD 26
COUNTER WEIGHT 27
GRADING RING 28
www.jiangdong-group.com 02
SHIELDING RING 30
Link Fittings 31
ADJUSTER PLATE 32
BALL EYE 33
CHAIN LINK 35
CLEVISES 36
CLEVISES TONGUE 37
EXTENSION ROD 38
EYE LINK 40
SHACKLE 41
SOCKET CLEVIS 42
STRAPS 43
TURNBUCKLET 44
U BOLT 45
YOKE PLATE 46
Tension clamp 48
BOLTED TENSION CLAMP 49
Suspension Clamp 53
ARMOUR GRIP SUSPENSION CLAMP FOR
54
CONDUCTOR
TRUNNION SUSPENSION CLAMP 55
www.jiangdong-group.com 03
ENVELOPE TYPE SUSPENSION CLAMP 56
Insulator 58
COMPOSITE LONG ROD INSULATOR 59
GLASS INSULATOR 69
Arrester 71
HIGH VOLTAGE LINE WITH GAP ARRESTER 72
Conductor 74
CONDUCTOR 75
www.jiangdong-group.com 04
LINE SYSTEM
Spacer
www.jiangdong-group.com 05
LINE SYSTEM SPACER
Products
Eight-Bundle Spacer Damper
Eight-Bundle Spacer Dampers are to control
aeolian vibration and sub-span oscillation. Also
to maintain conductor spacing and restore con-
ductor spacing after a short circuit occurs.
Technical features:
1. Spacer Dampers are available for
eight bundle conductor arrangement
and are suitable for use on all kinds of
conductors constructions including
high temperature conductors;
2. The shape of the clamps has been
Product advantages:
1. We have supplied forged spacer dampers for transmission lines;
2. Computer simulation software TIII , which can do vibration study for installation
scheme of bundle spacer, or the combination of spacer and vibration dampers;
3. We can design the spacer damper according to the special requirements and differ-
ent standards.
Dimensions (mm)
Catalog No. Suitable Conductor (mm)
L D
Remark: *L1, *L2, *C, *M, please refer to related product drawings.
www.jiangdong-group.com 06
LINE SYSTEM SPACER
Technical features:
1. Spacer Dampers are available for six
bundle conductor arrangement and are
suitable for use on all kinds of conduc-
tors constructions including high tem-
perature conductors;
2. The shape of the clamps has been de-
Product advantages:
1. We have supplied forged spacer dampers for transmission lines;
2. Computer simulation software TIII , which can do vibration study for installation
scheme of bundle spacer, or the combination of spacer and vibration dampers;
3. We can design the spacer damper according to the special requirements and differ-
ent standards.
Dimensions (mm)
Catalog No. Suitable Conductor (mm)
L D
www.jiangdong-group.com 07
LINE SYSTEM SPACER
Technical features:
1. Spacer Dampers are available for
quad bundle conductor arrangement
and are suitable for use on all kinds of
conductors constructions including
high temperature conductors;
2. The shape of the clamps has been
designed to be corona free even at the highest voltages;
3. The Material for the frame and the clamps are Al.alloy (Casting or Forging).
Product advantages:
1. We have supplied forged spacer dampers for transmission lines;
2. Computer simulation software TIII , which can do vibration study for installation
scheme of bundle spacer, or the combination of spacer and vibration dampers;
3. We can design the spacer damper according to the special requirements and differ-
ent standards.
Dimensions (mm)
Catalog No. Suitable Conductor (mm)
L1 D
www.jiangdong-group.com 08
LINE SYSTEM SPACER
Technical features:
1. Spacer Dampers are available for triple
bundle conductor arrangement and are
suitable for use on all kinds of conduc-
tors constructions including high tem-
perature conductors;
2. The shape of the clamps has been de-
signed to be corona free even at the highest voltages;
3. The Material for the frame and the clamps are Al.alloy (Casting or Forging).
Product advantages:
1. We have supplied forged spacer dampers for transmission lines;
2. Computer simulation software TIII , which can do vibration study for installation
scheme of bundle spacer, or the combination of spacer and vibration dampers;
3. We can design the spacer damper according to the special requirements and differ-
ent standards.
Dimensions (mm)
Catalog No. Suitable Conductor (mm)
L1 D
www.jiangdong-group.com 09
LINE SYSTEM SPACER
Technical features:
1. Spacer Dampers are available for twin bundle conductor arrangement and are suitable
for use on all kinds of conductors constructions including high temperature conductors;
2. The shape of the clamps has been designed to be corona free even at the highest volt-
ages;
3. The Material for the frame and the clamps are Al.alloy (Casting or Forging).
Product advantages:
1. We have supplied forged spacer dampers for transmission lines;
2. Computer simulation software TIII, which can do vibration study for installation
scheme of bundle spacer, or the combination of spacer and vibration dampers;
3. We can design the spacer damper according to the special requirements and differ-
ent standards.
Dimensions (mm)
Catalog No. Suitable Conductor (mm)
L D
www.jiangdong-group.com 10
LINE SYSTEM SPACER
Dimensions (mm)
Catalog No. Suitable Conductor (mm)
L D
www.jiangdong-group.com 11
LINE SYSTEM
Vibration Damper
www.jiangdong-group.com 12
LINE SYSTEM VIBRATION DAMPER
Products
Bolted Vibration Damper
for conductor
The vibration damper has been designed
to provide the best possible protection
from aeolian vibration for conductors and
earth wires (including OPGW) used for elec-
tric power transmission and distribution.
Technical features:
1. Vibration dampers are designed to dis-
sipate the maximum amount of vibration
energy to prevent fatigue damage to the
strands of the conductors;
2. Vibration damper has an asymmetric de-
sign that features 4 resonant frequencies.
Product advantages:
1. Computer simulation software TIII. This computer model identifies the optimum
damper placement on the span. Of which the development has been verified by
decades of testing and field measurements.
2. We have own test lab which has CNAS certificate(IEC 17025). We can do all type
tests for vibration damper according to IEC 61897, AS 1154.1, etc. Even damper effec-
tiveness evaluation test for large span.
3. We also can provide breakaway bolt for this vibration dampers as per requirements.
Remark: *L, *D, *h, *α, please refer to related product drawings.
www.jiangdong-group.com 13
LINE SYSTEM VIBRATION DAMPER
Technical features:
1. Vibration dampers are to dissipate the
maximum amount of vibration ener-
gy to prevent fatigue damage to the
strands of the conductors;
2. Vibration damper has an asymmetric
design that features 4 resonant fre-
quencies.
Product advantages:
1. Computer simulation software TIII. This computer model identifies the optimum
damper placement on the span whose development has been verified by decades of
testing and field measurements.
2. We have own test lab which has CNAS certificate(IEC 17025). We can do all type
tests for vibration damper according to IEC 61897, AS 1154.1, etc. test standards, even
damper effectiveness evaluation test for large span.
3. This design can avoid stress concentration and it is suitable for stress sensitive con-
ductors.
Dimensions (mm)
Applicable Volt-
Catalog No. age L L1 H L2 D
Dimensions (mm)
Applicable Volt-
Catalog No. age L L1 H L2 D
500/45
FRYJ-4/6 630/45 570 60 90 1020 4
630/55
Remark: *L, *L1, *H, *L2, *D, please refer to related product drawings.
Technical features:
1. Vibration dampers do not dissipate
energy, but control vibration to disrupt
vibration build up, by impacting on the
cable or the conductor;
2. Preformed design can hold the cable
tightly without affecting the attenuation
of the fibers in the cable.
Product advantages:
1. For ADSS used in the transmission lines with voltage higher than 110kV, we can provide
anti-E corrosion type;
2. Using a high impact strength, UV resistant plastic. They are suitable for use in all envi-
ronments, and may be used for conductor temperatures up to 75℃;
3. It is easy to install on the cable.
Dimensions
Catalogue number
Range diameter (mm)
Resistance to (mm)
Normal type L1 L2
E-corrosion type
FLP-10 FLN-10 10.39~11.70 300 1050
www.jiangdong-group.com 15
LINE SYSTEM VIBRATION DAMPER
Dimensions
Catalogue number
Range diameter (mm)
Resistance to (mm)
Normal type L1 L2
E-corrosion type
FLP-11 FLN-11 11.71~13.0 300 1050
Remark: *L, *D, *h, *α, please refer to related product drawings.
www.jiangdong-group.com 16
LINE SYSTEM
Splicing Fittings
www.jiangdong-group.com 17
LINE SYSTEM SPLICING FITTINGS
Products
Mid-span Joint Sleeve
1. There should be a good contact surface between the splicing fitting and the conduc-
tor wire or ground wires;
2. The splicing fitting should not reduce the conductivity of the wire;
3. The resistance between the compression type splicing fittings and the two ends of
the wire connection should not be greater than the resistance of the same length
wire, and for the non-compression type splicing fittings, it should not be greater than
1.1 times the resistance of the same length wire.
Product advantages:
1. The hydraulic Mid-span Joint Sleeve has sufficient mechanical strength and good
electrical contact performance;
2. It has advantages such as Uniform pressure and material saving.
www.jiangdong-group.com 18
LINE SYSTEM SPLICING FITTINGS
Remark: *D, *D1, *L, *L1, please refer to related product drawings.
www.jiangdong-group.com 19
LINE SYSTEM SPLICING FITTINGS
Technical features:
The fastening pressure of the bolt will be fixed on the upper and lower grooves with the
connecting wire of the bolt, which is made of board and aluminum alloy material.
Product advantages:
1. The surface is smooth and flat without burrs;
2. High-quality aluminum alloy material, strong corrosion resistance, not easy to rust
and age;
3. The product type is different, can apply to multiple cross section cables;
4. It is to connect two kinds of cables that approximate the outside diameter.
www.jiangdong-group.com 20
LINE SYSTEM SPLICING FITTINGS
Technical features:
1. There should be a good contact surface between the splicing fitting and the con-
ductor wire or ground wires;
2. The splicing fitting should not reduce the conductivity of the wire.
Product advantages:
1. It has electrical contact performance;
2. With advantages such as uniform pressure and material saving;
3. Can effectively protect the wires and easy to install.
www.jiangdong-group.com 21
LINE SYSTEM SPLICING FITTINGS
Dimensions (mm)
Catalog No. Suitable Conductor
D d L
Repair Rod
The Repair Rod is primarily used to join kinds
of bare conductors and ground wires. It bears
the same electric load as conductors.
Technical features:
1. There should be a good contact surface
between the Repair Rod and the con-
ductor wire or ground wires;
2. The splicing fitting should not reduce
the conductivity of the wire.
Product advantages:
1. The repair rod has electrical contact performance;
2. It has advantages such as uniform pressure and material saving;
3. The repair rod can effectively protect the wires and easy to install.
Dimensions (mm)
Catalog No. Suitable Conductor
L D
FYB-120/20 140mm² 3.5 1500
www.jiangdong-group.com 22
LINE SYSTEM SPLICING FITTINGS
Dimensions (mm)
Catalog No. Suitable Conductor
L D
FYB-150/25 175mm² 3.5 1500
Repair Sleeves
The splicing fitting is primarily used to join kinds
of bare conductors and ground wires. Re-
pair Sleeves bear the same electric load as
conductors.
Technical features:
1. There should be a good contact surface
between the splicing fitting and the
conductor wire or ground wires;
2. The splicing fitting should not reduce
the conductivity of the wire;
3. The resistance between the compression type splicing fittings and the two ends of the
wire connection should not be greater than the resistance of the same length wire, and
for the non-compression type splicing fittings, it should not be greater than 1.1 times the
resistance of the same length wire.
Product advantages:
1. The Repair Sleeves have electrical contact performance;
2. It has advantages such as Uniform pressure and material saving.
www.jiangdong-group.com 23
LINE SYSTEM SPLICING FITTINGS
Dimensions (mm)
Catalog No. Suitable Conductor
D L R
www.jiangdong-group.com 24
LINE SYSTEM
Protective Fittings
www.jiangdong-group.com 25
LINE SYSTEM PROTECTIVE FITTINGS
Products
Arcing Horn
Technical features:
The lightning impulse discharge of the Arcing Horn should be lower than the impulse
intensity of the insulator string, and its power frequency discharge voltage should be
higher than the operating over-voltage of the system.
Product advantages:
1. The surface is polished, smooth without burrs;
2. The Arcing Horn can effectively protect the wires and easy to install.
Dimensions (mm)
Catalog No.
Fig.No. L H Ф1 Ф2 M
Remark: *L, *H, *ΦФ1, *ΦФ2, *M, please refer to related product drawings.
www.jiangdong-group.com 26
LINE SYSTEM PROTECTIVE FITTINGS
Arcing Ring
Technical features:
The lightning impulse discharge of the Arcing Ring should be lower than the impulse
intensity of the insulator string, and its power frequency discharge voltage should be
higher than the operating over-voltage of the system.
Product advantages:
1. The surface is polished, smooth without burrs;
2. The Arcing Ring can effectively protect the wires and easy to install.
Dimensions (mm)
Catalog No.
Fig.No. L L1 H D L2 M
Remark: *L, *L1, *H, *D, *L2, *M, please refer to related product drawings.
www.jiangdong-group.com 27
LINE SYSTEM PROTECTIVE FITTINGS
Armour Rod
Armour Rod is a spiral wound on the wire to
increase the stiffness and vibration resist-
ance of the wire at the winding location.
Technical features:
Rounded head or duckbill at the end of the
guard line.
Product advantages:
1. Less wear on the wire;
2. Good corrosion resistance;
3. The Armour Rod can effectively protect the wires and easy to install.
www.jiangdong-group.com 28
LINE SYSTEM PROTECTIVE FITTINGS
Counter Weight
Technical features:
Painted or hot-dip galvanized grey iron.
www.jiangdong-group.com 29
LINE SYSTEM PROTECTIVE FITTINGS
Product advantages:
Low cost and environmental protection.
Dimensions (mm)
Catalog No.
L L1 B1 H H1 B D
Remark: L, *L1, *B1, *H, *H1,*B, *D, please refer to related product drawings.
Grading Ring
www.jiangdong-group.com 30
LINE SYSTEM PROTECTIVE FITTINGS
Technical features:
The high voltage can be evenly distributed around the object to ensure that there is
no potential difference between various parts of the ring. So as to achieve the effect of
voltage equalization.
Product advantages:
1. The surface is polished, smooth without burrs;
2. High mechanical strength, no loosening or fatigue damage caused by wind vibration.
Dimensions (mm)
Catalog No.
Fig.No. L L1 L2 H D S M
Remark: *L, *L1, *L2,*H, *D, *S *M, please refer to related product drawings.
www.jiangdong-group.com 31
LINE SYSTEM PROTECTIVE FITTINGS
Shielding Ring
Technical features:
The high voltage can be evenly distributed around the object to ensure that there is
no potential difference between various parts of the ring, so as to achieve the effect of
voltage equalization.
Product advantages:
1. The surface is polished, smooth without burrs;
2. High mechanical strength, no loosening or fatigue damage caused by wind vibration.
Dimensions (mm)
Catalog No.
Fig.No. L L1 H D S M
FJP-300XL 1 600 800 220 32 80 16
Remark: *L, *L1, *H, *D, *S, *M, please refer to related product drawings.
www.jiangdong-group.com 32
LINE SYSTEM
Link Fittings
www.jiangdong-group.com 33
LINE SYSTEM LINK FITTINGS
Products
Adjuster Plate
Adjuster Plate is a connection fit-
ting with adjustable length.
Technical features:
The adjuster plate is generally used on
the tension insulator string to adjust the
string length.
Product advantages:
1. The adjuster plate uses hot-dip galvanizing to prevent corrosion;
2. The mechanical strength of the adjuster plate is high.
PT-7 45 30 45 16 18 16 18 225-345 70
PT-10 50 40 50 18 20 16 20 250-390 100
PT-12 60 75 60 22 24 16 24 315-495 120
PT-16 65 50 65 24 26 18 26 325-505 160
PT-21 70 90 70 27 30 26 30 370-580 210
PT-25 80 90 80 30 33 30 34 420-660 250
PT-30 85 100 85 36 39 32 38 455-710 300
PT-50 70 80 100 42 45 38 40 740-1280 500
PT-60 90 80 100 48 51 42 44 820-1390 600
PT-21370-580 70 80 70 24 26 20 24 370-580 210
PT-25420-660 80 90 80 27 30 24 28 420-660 250
www.jiangdong-group.com 34
LINE SYSTEM LINK FITTINGS
Remark: *L0, *L1, *L2, *M, *d, *b, *C, *L, please refer to related product drawings.
Ball Eye
Technical features:
1. The ball eye is integrally forged from round steel and bears mechanical load;
www.jiangdong-group.com 35
LINE SYSTEM LINK FITTINGS
Product advantages:
1. The surface is polished, smooth without burrs;
2. High mechanical strength, no loosening or fatigue damage caused by wind vibration.
Q-7 33.3 17 50 22 16 70 16
QP-7 33.3 17 50 20 16 70 16
Remark: *Ф, *D, *h, *d, *b, please refer to related product drawings.
www.jiangdong-group.com 36
LINE SYSTEM LINK FITTINGS
Chain Link
Chain Link is used for the connection of
ring fittings to lengthen the connection size
or change the connection direction.
Technical features:
The chain link is integrally forged from
round steel and bears mechanical load.
Product advantages:
1. The surface is smooth and free of burrs;
2. The chain link uses hot-dip galvanizing to prevent corrosion;
3. The mechanical strength of the chain link is high.
www.jiangdong-group.com 37
LINE SYSTEM LINK FITTINGS
Clevises
Clevises is a steering connection fitting
that changes the connection direction.
Technical features:
Since the connecting directions of the
clevises are at right angles to each other,
they are flexible and adaptable.
Product advantages:
1. The surface is smooth and free of burrs;
2. The clevises uses hot-dip galvanizing to prevent corrosion;
3. The mechanical strength of the clevises is high.
Remark: *C1, *C2, *M1, *M2, *h, please refer to related product drawings.
Clevises Tongue
Clevises Tongue is a steering connection fit-
ting that changes the connection direction.
Technical features:
Since the connecting directions of the clev-
ises tongue are at right angles to each other,
they are flexible and adaptable.
Product advantages:
1. The surface is smooth and free of burrs;
2. The clevises tongue uses hot-dip galvanizing to prevent corrosion;
3. The mechanical strength of the clevises tongue is high.
www.jiangdong-group.com 39
LINE SYSTEM LINK FITTINGS
Remark: *C, *b, *M, *d, *h, please refer to related product drawings.
Extension Rod
Extension Rod is used for the connection of fittings
to extend the connection distance. The earrings at
both ends of the rod form a 90 angle, and they can
also be used to switch the connection direction.
Technical features:
The extension rod is integrally forged from
round steel and bears a mechanical load.
It can stagger the tension clamps of the
upper and lower conductors of the vertical-
ly arranged split conductors, avoiding the
www.jiangdong-group.com 40
LINE SYSTEM LINK FITTINGS
tension clamps of the upper and lower conductors from colliding or keeping the dis-
tance between the four conductors of the jumper.
Product advantages:
1. The surface is smooth and free of burrs;
2. It uses hot-dip galvanizing to prevent corrosion;
3. The mechanical strength is high.
Remark: *D, *d, *b, *L, please refer to related product drawings.
www.jiangdong-group.com 41
LINE SYSTEM LINK FITTINGS
Eye Link
The eye link is the fitting used for the connection
of ring fittings to change the connection direction.
Technical features:
1. The Eye link is integrally forged from
round steel and bears mechanical load;
2. It use hot-dip galvanizing to prevent
corrosion.
Product advantages:
1. The structure is simple;
2. It has high failing load;
3. It can be flexibly rotated without being restricted by direction.
ZH-4 12 12.5 18 14 38 70 40
ZH-7 16 16 24 20 57 100 70
ZH-10 18 16 24 20 57 100 100
ZH-12 18 16 22 24 65 115 120
ZH-16 22 18 26 26 75 135 160
ZH-21 24 26 32 30 75 150 210
Remark: *D, *b, *C, *d, *h1, *h, please refer to related product drawings.
www.jiangdong-group.com 42
LINE SYSTEM LINK FITTINGS
Shackle
U shackle is the fitting usually used for installing
insulator strings to the cross arm of a pole or tower.
Technical features:
1. The U shackle is integrally forged from
round steel;
2. It has a wide range of uses.
Product advantages:
1. The structure is simple;
2. It has high failing load;
3. It can be flexibly rotated without being restricted by direction.
www.jiangdong-group.com 43
LINE SYSTEM LINK FITTINGS
Remark: *C, *M, *D, *h, *R, please refer to related product drawings.
Socket Clevis
Socket Clevis is the fitting used for connec-
tion with the ball & socket insulator.
Technical features:
1. It uses hot-dip galvanizing to prevent cor-
rosion;
2. It has a high failing load.
Product advantages:
1. It has no direction and can be turned;
2. It is easy to load and unload.
www.jiangdong-group.com 44
LINE SYSTEM LINK FITTINGS
W-16TG 23 80 22 18 160 20
W-21TG 23 80 22 18 210 20
Remark: *C, *M, *D, *h, *R, please refer to related product drawings.
Straps
The strap is the fitting used for the connec-
tion of the fittings with the clevis. The straps can
be used to change the string length. It can not
be used to change the connection direction.
Technical features:
It is cut from a steel plate and bears a me-
chanical load.
Product advantages:
1. The surface is smooth and free of burrs;
2. It use hot-dip galvanizing to prevent corrosion;
3. It has high failing load.
www.jiangdong-group.com 45
LINE SYSTEM LINK FITTINGS
Remark: *d, *b, *S, *L, please refer to related product drawings.
Turnbucklet
A connection fitting with adjustable length.
Technical features:
The turnbuckle is generally used on the
tension insulator string to adjust the string
length.
www.jiangdong-group.com 46
LINE SYSTEM LINK FITTINGS
Product advantages:
1. The surface is smooth and free of burrs;
2. The turnbuckle uses hot-dip galvanizing to prevent corrosion;
3. The mechanical strength of the turnbuckle is high.
Dimensions (mm)
Type Rated Failure Load (kN)
d L L1 D b
Remark: *d, *L, *L1, *D, *b, please refer to related product drawings.
U Bolt
A connection fitting is used for installing insula-
tor strings to the cross arm of the pole or tower.
Technical features:
Bears mechanical load.
Product advantages:
1. The surface is smooth and free of burrs;
2. The U bolt uses hot-dip galvanizing to prevent corrosion;
3. The mechanical strength of the U bolt is high.
www.jiangdong-group.com 47
LINE SYSTEM LINK FITTINGS
Dimensions (mm)
Catalog No.
C M D h h1
UJ-1880 80 18 18 105 50
UJ-2080 80 20 20 120 60
UJ-2280 80 22 22 126 65
U-1650 50 16 16 100 80
U-1670 70 16 16 122 80
U-1680 80 16 16 122 80
U-1690 90 16 16 140 80
U-1870 70 18 18 122 85
U-1880 80 18 18 122 80
U-2070 70 20 20 135 95
U-2080 80 20 20 130 90
U-2090 90 20 20 145 90
U-2280 80 22 22 118 90
Remark: *C, *M, *D, *h, *h1, please refer to related product drawings.
Yoke Plate
www.jiangdong-group.com 48
LINE SYSTEM LINK FITTINGS
Technical features:
It is cut from a steel plate and bears a mechanical load.
Product advantages:
1. The surface is smooth and free of burrs;
2. The yoke plate uses hot-dip galvanizing to prevent corrosion;
3. The mechanical strength of the yoke plate is high.
Dimensions (mm)
Type Rated Failure Load (kN)
b h d1 d2 L
Remark: *b, *h, *d1, *d2, *L, please refer to related product drawings.
www.jiangdong-group.com 49
LINE SYSTEM
Tension clamp
www.jiangdong-group.com 50
LINE SYSTEM TENSION CLAMP
Products
Bolted Tension Clamp
Bolted Tension Clamp is used for fixing the ter-
minal of the conductor and ground wire on the
tension tower. They can bear all or part of the
tension of the conductor and ground wire.
Technical features:
There is no need to cut the wire, and it is fixed
with several U-shaped screws, but the grip
strength is not as good as the compression
type.
Product advantages:
1. Installation is easy, there is no need hydraulic equipment;
2. Each type is applicable to a wide range of conductors.
Remark:
1. *L1, *L2, *C, *M, please refer to related product drawings.
2. When the cable diameter range overlaps, it is preferable to use small type.
www.jiangdong-group.com 51
LINE SYSTEM TENSION CLAMP
Technical features:
Compression type is generally divided into hydraulic pressure and explosion pressure,
and its connection types is ring connection and clevis connection.
Product advantages:
1. The grip strength is high enough, and can bear all the tension of the conductor and
ground wire at most;
2. Steel anchor has high mechanical strength and strong corrosion resistance;
3. The direction of the jumper clamp can be flexibly adjusted according to customer
requirements.
www.jiangdong-group.com 52
LINE SYSTEM TENSION CLAMP
Remark: *D1, *D2, *D3, *L1, *L2, *L3, *R, please refer to related product drawings.
Technical features:
Due to its internal wedge-shaped struc-
ture, it can be pulled more and more
tightly in the line. Thus can meet the re-
quirement of standard holding strength of
95% RTS of the conductor.
www.jiangdong-group.com 53
LINE SYSTEM
Product advantages:
1. The construction is convenient without special tools and instruments, one wrench
can complete the installation;
2. Free maintence of bolt looseness and heating of the jumper plate. Free maintence of
the looseness of the jumper plate during long-term operation.
Remark: *L1, *L2, *C, *M, please refer to related product drawings.
www.jiangdong-group.com 54
LINE SYSTEM
Suspension Clamp
www.jiangdong-group.com 55
LINE SYSTEM SUSPENSION CLAMP
Products
Armour Grip Suspension
Clamp For Conductor
Armour Grip Suspension Clamp is primarily used
to fix conductors to insulator strings or hang light-
ning conductors on straight-line towers. Moreo-
ver, it also can be used for transposition towers to
support transposition conductors and for tension
towers or angle poles to fix the jumper wires.
Technical features:
1. The rubber wraps the conductor to form an elastic buffer, which avoids the rigid con-
tact between the suspension clamp and the conductor, ensures the grip strength of
the clamp and effectively eliminates the harmful centripetal pressure;
2. The ARMOR-GRIP Suspension is superior to bolted alternative combinations for
3. protecting conductors from bending, compression stress and abrasion.
Product advantages:
1. The material of clamp is forged aluminum alloy,has high mechanical strength and
strong corrosion resistance;
2. Simple structure, convenient installation, no special tools and maintenance free;
3. Minimal heat transferred to mating hardware and insulators.
www.jiangdong-group.com 56
LINE SYSTEM SUSPENSION CLAMP
Remark:
1. *C, *M, *H, please refer to related product drawings;
2. ****: Section of conductor
(AAAC add “LH”; AAC add “L”; ACSR section of AL/STEEL ; ACAR section of AL/AL alloy)
For example: AAAC Flint: Aluminum-Alloy wire 37/3.59 : CL-375LH;
AAC Carnation:Aluminum wire 61/3.891: CL-725L;
ACSR Olive:Aluminum wire -Steel wire 54/3.5-7/3.5: CL-520/67;
ACAR 1024.5MCM-30/7:Aluminum-Alloy Wire-Aluminum Wire 30/4.227-7/4.227: CL-410/100
Technical features:
The rotating shaft of the clamp and con-
ductor are on the same axis, the rotation
is flexible.
Product advantages:
1. It has the characteristics of large grip force and flexible rotation;
2. It has the characteristics of high strength, light weight;
3. The surface is polished, smooth without burrs.
www.jiangdong-group.com 57
LINE SYSTEM SUSPENSION CLAMP
Remark:
1. *H, *L, *R, *C, *M, please refer to related product drawings;
2. Suitable Dia=Conductor Dia+2*Armour Rods Dia;
3. Usually, armour rods should be used in Suspension String, jumper String is unnecessary to use;
4. Armour Rods Dia will be customized for different conductor.
Technical features:
The body and keeper are made of aluminum alloy, the hanging point is located above
the conductor axis.
Product advantages:
1. It has the characteristics of high strength, light weight;
2. It has the characteristics of simple structure, convenient installation;
3. The surface is polished, smooth without burrs.
www.jiangdong-group.com 58
LINE SYSTEM SUSPENSION CLAMP
Remark:
1. *H, *L, *R, *C, *M, please refer to related product drawings;
2. Suitable Dia=Conductor Dia+2*Armour Rods Dia;
3. Usually, armor rods be used in Suspension String, unnecessary be used in Jumper String;
4. Armour Rods Dia will be customized for different conductor.
www.jiangdong-group.com 59
LINE SYSTEM
Insulator
www.jiangdong-group.com 60
LINE SYSTEM INSULATOR
Products
Composite Long Rod Insulator
Composite Long Rod Insulator is composed
of end fittings and composite insulating ma-
terials. It plays the role of electrical insulation
and mechanical fixing. Moreover, it is an im-
portant component of the power system
Technical features:
The creepage distance is provided through
the combined and arranged extended insu-
lating rubber shed. Of which has good insu-
lation performance. It has good mechanical
performance through the crimping of excel-
lent rod materials and fittings.
Product advantages:
1. The connection of the fittings is protected by a zinc layer, ultrasonic monitoring,
computer-controlled coaxial pressure crimping process. The crimping after crimping
is bright as new, and the effect is stable and reliable;
2. The aerodynamically designed silicone rubber shed is applied with the integral
shaping technology of the sheath. Thus to ensure that all creepage distances are ef-
fective under any climate and pollution conditions. And to improve the self-cleaning
ability of the synthetic insulator in the air;
3. The use of ECR high temperature reinforced acid-resistant mandrel;
4. The connection between the fitting and the rod adopts a labyrinth-type waterproof
design. Also adopts an outsourcing glue technology, which greatly improves the
waterproof and anti-seepage performance of the product.
www.jiangdong-group.com 61
LINE SYSTEM INSULATOR
www.jiangdong-group.com 67
LINE SYSTEM INSULATOR
www.jiangdong-group.com 68
LINE SYSTEM INSULATOR
www.jiangdong-group.com 69
LINE SYSTEM INSULATOR
www.jiangdong-group.com 70
LINE SYSTEM
Glass Insulator
Glass Insulator is a device used to support
and insulate wires. Its main material is glass.
Technical features:
It is made of tempered glass and pro-
vides creepage distance by extending
the shed. Other main components are
steel caps and pins.
Product advantages:
1. Glass insulator has good electron-mechanical performance;
2. It has the characteristics of zero value self explosion, which can reduce a large num-
ber of zero value detection and other operation and maintenance work;
3. Its service life cycle is long.
Lighting Impulse Withstand
Size of Coupling
Diameter *D
(10kV,1MHz)
Spacing *H
Voltage
www.jiangdong-group.com 71
LINE SYSTEM INSULATOR
Size of Coupling
Diameter *D
(10kV,1MHz)
Spacing *H
Voltage
U160B/155 280 155 450 20 160 80 75 45 110 130 ≤50 18/22
U210B/170 280 170 460 20 210 105 85 45 125 130 ≤50 18/22
U210B/170 280 170 400 20 210 105 75 45 110 130 ≤50 18/22
U240B/170 280 170 400 24 240 120 75 45 110 130 ≤50 18/22
U240B/170 280 170 460 24 240 120 85 50 110 130 ≤50 18/22
U300B/195 320 195 485 24 300 150 85 50 130 130 ≤50 18/22
U420/205 360 205 550 28 420 210 90 55 140 130 ≤50 18/22
www.jiangdong-group.com 72
LINE SYSTEM
Arrester
www.jiangdong-group.com 73
LINE SYSTEM ARRESTER
Products
High Voltage Line with Gap Arrester
Surge arrester is also called over-voltage pro-
tector and over-voltage limiter. It is connect-
ed in parallel to the front end of the protected
equipment to protect other electrical equip-
ment. In case they are damaged from lightning
over-voltage, operating over-voltage, and pow-
er frequency transient over-voltage impact.
Technical features:
High Voltage Line With Gap Arrester is mainly composed of insulating housing (compos-
ite or ceramic material), resistor, end accessories, and composite insulator gap.
Product advantages:
1. The resistors are manufactured with high-quality raw materials and strict process-
es. The comprehensive performance of the resistors has reached China’s advanced
level. Especially the current capacity, high current impact and residual voltage ratio
performance have reached China’s leading level.
2. The use of duration encapsulating materials or epoxy composite casing fundamen-
tally solves the problem of product failure caused by moisture intrusion. Even in a
high temperature environment with a humidity of more than 90%, there will not be
any failures.
3. Silicone rubber material is highly hydrophobic, it can prevent rainwater from form-
ing continuous channels and prevent any pollutants from accumulating during use.
Make the product corrosion resistant and cut off the leakage current path. Moreover,
the flame retardant and self-extinguishing properties of the material can realize the
product cleaning-free function.
www.jiangdong-group.com 74
LINE SYSTEM ARRESTER
YH20CX-396/1050
YH20CX-396/1050
YH10CX-204/592
YH10CX-288/775
YH10CX-108/320
YH10CX-102/296
YH10CX-192/560
Type
Electric pa-
Rated voltage UR (kV) 102 108 192 204 288 396
rameters
Electric pa- Square wave impulse 500/ 500/ 600/ 600/ 800/ 1200/
rameters withstand Current (A) 600 600 800 800 1200 1800
Structural
Overall height H (mm) 1256 1256 3783 3783 4757 6971
parameters
Structural
Shed diameter Φ (mm) 195 195 195 195 252 252
parameters
www.jiangdong-group.com 75
LINE SYSTEM
Conductor
Conductor Type:
• AAC-All Aluminum Conductors
• AAAC -All Aluminum Alloy Conductors
• ACSR- Aluminum Conductors Steel Reinforced
• ACSR/AW -Aluminum Conductors
Aluminum Clad Steel Reinforced
• ACAR-All Aluminum Conductor Alloy Reinforced
• AACSR-Aluminum Alloy Conductors Steel Reinforced
• GSW-Zinc-Coated (Galvanized) Steel
Overhead Ground Wire Strand
• ACS-aluminum-clad steel conductors
www.jiangdong-group.com 76
LINE SYSTEM CONDUCTOR
Products
Conductor
Technical details:
Invar Conductor made is a kind of special overhead conductor stranded with high-
strength aluminum-clad invar core and super thermal resistant aluminum alloy wire. It
takes advantage of the low linear expansion coefficient of invar material to make “low
sag” and uses a thermal resistant aluminum alloy to have “ large-capacity”, making full
use of original transmission line and tower resources and saving space. It has the feature
of doubling capacity with the same diameter and the same sag, which can ensure power
transmission at peak season.
Characteristics:
• 2 times current carrying capacity without increasing sag.
• More economical for fittings.
• Easier installation than ACCC Conductor.
• More reliable operation experience.
• In compliance with or exceeding the industry’s most stringent requirements, including:
• IEC 62004
• IEC 61089
• IEC 62219
• Q/320623-AP25
www.jiangdong-group.com 77
LINE SYSTEM
DC
Structure Current capacity
Diam- Breaking resis-
Areas Weight
eter load tance at
Code
Al Steel 20ºC TACIR ZTACIR
160/40 18/3.37 7/2.65 199.16 17.04 65.06 0.1759 730 771 957
200/45 17/3.87 7/2.85 244.62 18.87 76.87 0.1412 883 890 1105
200/50 17/3.87 7/2.95 247.81 19.01 80.39 0.1409 906 892 1110
250/45 18/4.20 7/2.85 294.04 20.64 82.64 0.1141 1019 1017 1268
250/40 18/4.13 7/2.75 290.96 20.51 81.12 0.1143 996 1014 1264
240/55 18/4.13 7/3.20 297.43 20.82 93.12 0.1169 1083 1007 1138
240/50 18/4.71 7/3.00 290.62 20.55 88.13 0.1157 1032 1000 1131
315/55 18/4.71 7/3.20 396.92 23.15 104.06 0.0907 1266 1182 1479
315/50 18/4.71 7/3.00 363.10 22.91 97.20 0.0910 1232 1176 1471
330/60 18/4.81 7/3.30 386.95 23.68 109.70 0.0869 1329 1216 1522
350/55 20/4.71 7/3.20 404.77 24.19 109.33 0.0819 1379 1262 1580
Overseas References
www.jiangdong-group.com 78