Professional Documents
Culture Documents
Datasheet MCFB4x
Datasheet MCFB4x
Specifications Description
Monitored Voltage: 100-120V, 200-240V, The digitally controlled MCFB4x is for use in applications that require a very fast response,
380-415V, 440-460V, precision monitoring of the frequency. Ideal for systems for regulation and control of the
480VAC, 40-70Hz frequency on generators, motors and inverters.
(Fuse 0,5A)
Related information:
The MCFB4x series are also available for panel mounting as
MPFE series.
Norway
Denmark
United Kingdom Page: 1 of 2
REF: Datasheet.MCFB4x - REV: 2.02/07.2022
www.megacon.com © All rights reserved to Megacon
ELECTRONIC CONTROL AND INSTRUMENTATION Megacon reserves the right to make any changes to the information at any time
FREQUENCY TRANSDUCER MCFB4x
Connection Diagram Analogue Output
Connection Diagram without optional slave instrument The output signals are proportional to the meter reading (see page
L1 1 for an overview of models and functions).
L2
L3
The signal is specifically intended as an input to a control system
for monitoring or control.
N ~
+ ~
-
Separate
Monitored AC or DC Add suffix from table below to type designation to specify output
Voltage
(*Note)
Aux.Supply
(Optional)
required:
1 2 3 4 26 27 5 6 7 8 9 10
Outputs 1 Outputs 2
O/P1 0 - 10mA O/P11 0 - 10mA
MCFB4x O/P2 0 - 20mA O/P12 0 - 20mA
O/P3 4 - 20mA O/P13 4 - 20mA
O/P4 N/A O/P14 N/A
12 13 14 15 28 29 16 17 18 19 20 21 22 23 24 O/P5 N/A O/P15 N/A
O/P6 N/A O/P16 N/A
O/P7 N/A O/P17 N/A
+ -
Analogue
+ -
Analogue
O/P8 0 - 10V O/P18 0 - 10V
output 1 output 2 O/P9 0,2 - 10V O/P19 0,2 - 10V
(standard) (optional) O/P10 4,3 - 20mA O/P20 4,3 - 20mA
Connection Diagram with optional slave instrument
L1 Connection
L2
Terminal type : Terminal Clamp and Screw
Wire max. : T1-T4,
L3
T26-T27: AWG 24-14,
N ~
+ ~
- T5-T10: AWG 12,
Separate
Monitored AC or DC
other terminals: AWG 24-12
Voltage Aux.Supply Screw Torque : 0.5Nm
(*Note) (Optional)
1 2 3 4 26 27 5 6 7 8 9 10
Overload
Voltage : 1.2 x Un continuous
2 x Un for 10secs
MCFB4x
RJ12 plug cable
Com. cable to
+ - + - slave indicator
Analogue Analogue Hz 65
output 1 output 2 55
(standard) (optional)
Optional DIN96 POW ER
MEA SURING
slave indicator
T RA NSDU CER
45
MFI96E
*Note: The standard models takes the auxiliary supply voltage from the monitored voltage (terminal 1 & 2).
Dimensions
75mm
Mounting : 35mm Rail Mount EN 60715
Dimensions : 100mm x 75mm x 110mm
100mm
85mm Slave Indicator
A B C Panel cut-out
DIN96 96 x 96mm 92 x 92mm 64mm Maximum panel
thickness 10mm
Norway
Denmark
United Kingdom Page: 2 of 2