Professional Documents
Culture Documents
HM911245 HM911210 TaperedRollerBearings TS (TaperedSingle) Imperial
HM911245 HM911210 TaperedRollerBearings TS (TaperedSingle) Imperial
Specifications | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Specifications
Series HM911200
4.5 lb
Bearing Weight
2.1 Kg
Dimensions
11/25/2022 | Page 2 of 4
2 3/8 in
d - Bore
60.325 mm
5.125 in
D - Cup Outer Diameter
130.175 mm
1.3125 in
B - Cone Width
33.338 mm
0.9375 in
C - Cup Width
23.813 mm
1.4375 in
T - Bearing Width
36.513 mm
0.21 in
a - Effective Center Location3
5.3 mm
11/25/2022 | Page 3 of 4
41100 lbf
C0 - Static Radial Rating
183000 N
Factors
K - Factor7 0.71
on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
0.9375
0.20
1.3125
5.1250
2.3750
4.29
2.91
3.66
4.88
0.21
IMPERIAL UNITS
ISO Factor - e 0.82
ISO Factor - Y 0.73 HM911245 - HM911210
Bearing Weight 4.5 lb Tapered Roller Bearings - TS (Tapered Single)
Number of Rollers Per Row 15 Imperial
Effective Center Location 0.21 inch
K Factor 0.71
Dynamic Radial Rating - C90 11500 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 16200 lbf
NORTH CANTON, OHIO USA Static Radial Rating - C0 41100 lbf
Dynamic Radial Rating - C1 44400 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY