Professional Documents
Culture Documents
Mechanical Operations
Mechanical Operations
Since V avg to dia bhi avg Dv3 avg dia coz foung using mean volume so mean dia vol
Aim – to calc vol mean dia vol mean dia ke liye mean volume or mean volume se mean dia
Ni=no. of particles present in ith sample ,sum of particles in different fractions= total no. of particles
formula mentioned
Vpi me bhi for mass of one particle in ith fraction use v shape factor
N=
m/V= density
agr aprticles ka size deviate nhi karega jyada to we can use avg size analysis
agar dia har fraction ka barabar to noneed of dpi we can write avg dia
Dvsbar sauter mean dia cozmit represents an avg dia. avg size analysis hita to ye dia ban jati but ye
mixed size analysis h so sauter mean dia
Jab add karte hue fraction given to cumulativeand ultimately one ban jayegi
Hemisphere ka dis d given hone pe bhi dp nikala with equivalence from sphericity coz resemblance
sphere se nikalna hcumulative analysis more accurate coz assumption of equal size is not needed
assumption of equal particle size is not needed because eventually the previous data is added up with the next
data. Also , An approach where each sample mass fraction is first calculated and the data is added up with the
mass fraction of next sample.
Dpi is avg dia of particles I ith fraction which can be calculated by taking avg of smallest and largest particle
dia in that fraction
TSh- transport storage handling mohs scale- gives value of scale to different materials for
hardness
Jitni p hu machine ko dete h utni material ki=o nhi milti some part of it goes to overcoming
friction, sound , wear and tear, heat , etc to bht kam pahucti h solid object tak
Jab energy by machine overcome binding energy of solid to wo tut jata h
Jitni energy solid ko mili uska bhi bh kam part aage jata h like machine becoz of losse
Crushing-coarse
Impact fine
Grinders ultrafine
Crushing= size efficiency for this lecture
Itna stress ki uska strai n overcome karke tut jaye
Surface energy factor from solid theories
Eta m and eta c theretical value or given by manufacturer
Namse jyada unit imp in cal of this Wc