Professional Documents
Culture Documents
2 when cleaning interval time how days long take shutdown for cleaning.
7 assemblies attached at whit out let like suction pump or etc tools fitted.
13 if use manual process the what type, what chemical and how is density for same.
Safe to Inspect
PetroBot Robotic Tools ensures safety by eliminating human inspector's need for height, confined space entry, and exposure to
hazardous chemicals and gases using ATEX/PESO Certified Robots.
Faster to Deploy
PetroBot Robotic Tools is highly portable and requires minimal support systems for launch and recovery. Therefore avoids
disruptions in plant operations, keeping revenue constant
PetroBot Inspection Tools eliminates the high cost of tank shutdown loss and the need for storage/scaffolding setup using PetroBot
Robotic Tools.
hat's why we developed the PetroBot In-services Tank Inspection System (ITIS) Rover. This innovative robotic tool allows for the
inspection of bottom plates on live liquid-filled storage tanks without the need for shutdowns, draining, cleaning, degasification,
or ventilation.
Equipped with an array of UT Probes, the ITIS Rover is able to conduct bottom plate scanning and corrosion surveys while the tank
is in operation and filled. Plus, its inspection data acquisition and navigation module ensure safety and prevent unwanted
accidents.
With the PetroBot ITIS Rover, tank owners can conduct inspections quickly and efficiently, saving time and money while protecting
their tanks and the environment. Our ITIS Rover is ATEX and PESO certified, making it possible to inspect tanks on-stream
without any shutdown. This not only saves time and tank cleaning costs, but it also allows you to extend the service life of your tank
as per OISD STD 129/API STD 653.
01
Provide Details on the Asset to be Inspected
To begin the PetroBot Inspection Service, we need to know what kind of asset you would like to be inspected. We will collect and
analyze asset drawings and previous inspection reports in order to plan and identify specific areas of interest on the asset for
inspection. This will ensure that the inspection is thorough and accurate.
02
Site Visit to Support Analysis and Planning*
After conducting an analysis, we will conduct a site visit to gain a better understanding of the site and address any doubts we may
have. This site visit will help us plan the deployment of the inspection tool in a controlled and efficient manner.
*optional process
03
Deployment of Robotic Inspection OnSite
After conducting a thorough analysis of the asset, we will deploy our inspection tool on site to perform the inspection. This process
typically takes a few days, depending on the size and scope of the inspection. Our robotic inspection technology is fast and efficient,
and completes inspection more quickly than manual inspections. Of course, delays due to gate passes and work permits can impact
the timeline, but we will do our best to work efficiently and minimize any disruptions.
04
Inspection Report and Analysis
After completing the inspection, a detailed inspection report will be available for review. The amount of time it takes to generate the
report will depend on the scope of the inspection and the number of assets inspected. We are confident that our inspection reports are
clear and concise, providing valuable insights and information.
ITIS Rover
Bottom Plate
Tanks - External
MagRover
Externa
Boiler Tubes
MagRover
Boiler
Pipelines
MagRover
Pipelines
Pressure Vessel
MagRover
External
CASHE STUDY
We are so excited to announce that ATEX Certified ITIS Rover have successfully cleared all its testing and completed it's
Pigging is the method of choice for inspections covering great distances. Lines more than 1,000 miles long have
been inspected by the single pass of a pig.
Furthermore, traditional hydraulic pigging is still often preferred because one of its most significant benefits is that it
can clean a wide range of pipeline diameters of up to 95 inches.
z