Professional Documents
Culture Documents
Tuerca A194 2H 1 1.8 Black
Tuerca A194 2H 1 1.8 Black
,LTD
JIANGNAN ROAD 1498<16-6>, HI-TECH ZONE, NINGBO, ZHEJIANG PROVINCE, CHINA
TEL: 86-574-82660348 FAX: 86-574-82660649
Email: sales@fastener.com
Web: http//www.fastener.com
Chemical Analysis
Element C (0.40 min) Mn (1.00 max) P (0.040 max) S (0.050 max) Si (0.40 max)
% 0.45 0.60 0.009 0.003 0.22
Mechanical Properties
Test Item Standard Results Sample Pass
Core Hardness (HRC) 24-35 29,30,29,30,30 5 5
Apply the specified proof load of (138200)for the nut against 138200 5 5
the nut,the nut shall resist this load without stripping or
rupture,and shall be removable from the mandrel by the
Proof loading (lbf)
fingers after the load is released,such wrenching is
permissible provided that it is restricted to one half turn and
that the nut is then removable by the fingers.
Dimensions of Spec
Test Item Spec. Inspection Results Sampling Rej Remark
Width across flats 44.60-46.02 44.65-45.71 50 0 OK
Width across angle 50.85-53.16 50.94-52.34 50 0 OK
Height 27.41-28.93 27.48-28.65 50 0 OK
Go Gauge 2B 2B 50 0 OK
No-Go 2B 2B 50 0 OK
Tempering temperature 455℃ 535℃ OK
Appearance OK OK OK
Macro etch
Division Surface Condition Random Condition Center Segregation Spec. Of test method
Spec. S2 R2 C3 ASTM E381
Results S2 R2 C2
NOTE: After 24 hours tempering test the temperature is 540℃, we tested 2 pcs samples, the core hardness is 92
and 94 HRB, We hereby certify that all the above results are original from our actual testing, and the products have
Proved to comply with the relevant standards.
NINGBO HUIZONE FASTENER CO.,LTD
Date: SEP.29, 2022