Professional Documents
Culture Documents
EOD Pit Details
EOD Pit Details
Applies to Edge-of-Dock levelers manufactured beginning Fig. 1 Upper and lower flange must
March 2009 with the serial numbers 10263626 and higher. have 1/4" x 1" x 8" strap anchors
alternating every 10" with outboard
Mechanical EOD levelers straps on top flange
12" Dock floor
1. Use a minimum 12" x 14" pit recess with an additional 3”
of clearance per side of leveler. See Fig. 1.
8"
2. Follow the section that addresses your installation and min.
then continue to the GENERAL INSTALLATION section 13"
in the your User’s Manual included with your leveler.
14"
All anchors
1/4"
Dock Face
8"
min. SECTION A-A
40°
Outboard strap
on top
1-1/2"
1/4" A
4"
All anchors
1/4"
Dock Face
8"
min. SECTION A-A
40° Outboard strap
on top
Push-button
control box
3/4" conduit
located as required
Steel, ASTM A36
C8 X 11.5# min. per local codes
(by others)
1"