Professional Documents
Culture Documents
87 Machinery Equipment
87 Machinery Equipment
Exhaust Valve
Fuel Pump
Camshaft
Scavenge
Ports
Air
Manifold Piston Rod
Gland
Crosshead
Guides
Charge
Air Cooler
Crankshaft
Bedplate
Water Jacket
Piston Rod
Glands
Camshaft
Guides
Piston Cooling
Recip. Pipes
Crankcase Frames
Relief Valve
Crankshaft
Webs
Bedplate
air
Air passes over the piston crown
and rises to form a loop within the
cylinder, expelling gas through exhaust
ports cut in the same side of the liner
above the scavenge ports.
Uniflow Scavenge : ext.
air air
Large Two-stroke Engine Pistons
Cooling of pistons is necessary to remove excess heat
from combustion and to limit thermal stressing. It also limits
thermal expansion to maintain correct clearances between
piston and liner and between ring grooves and rings. Cooling
may be carried out by circulating either water or oil.
Piston Rod
Forged Steel
Dowel
Crosshead
Four C.I.
Piston
Rings
Cast Iron
Skirt
Forged Steel
Piston Rod
Cooling Oil In
Exhaust Valves and Tappets
Valve Rocker
Tappet
Clearance
Springs
Valve
Cage Push-rod
Cooling
Water Space
Follower
Cooling
From
Cylinder
Cover
Exhaust Valve Camshaft
Anti-splashing Tape
for Ship's Engine Room
Судовой гидрофильтр
25A-100A 125A-400A
Unit Per Set
Flange
Nominal Total
Face to Bolt Weight
CODE Diam. Diam. Height
Face kgs
mm mm P.C.D. No. Diam. mm
mm mm mm
87 20 01 25 170 95 75 4 M10 180 5.80
02 32 190 115 90 4 M12 215 8.23
03 40 190 120 95 4 M12 215 8.43
04 50 200 130 105 4 M12 240 10.3
05 65 250 155 130 4 M12 305 18.5
87 20 06 80 270 180 145 4 M16 340 24.0
07 100 320 200 165 8 M16 400 35.7
08 125 400 235 200 8 M16 485 62.2
09 150 460 265 230 8 M16 575 88.6
10 200 550 320 280 8 M20 665 141
87 20 11 250 680 385 345 12 M20 825 246
12 300 760 430 390 12 M20 920 321
13 350 820 480 435 12 M22 1,030 428
14 400 880 540 495 16 M22 1,135 518
Filter Elements
for Marine Can Water Filter
Suitable for use with marine can water filter based on JIS
F-7121 specification.
Made of stainless steel with light weight and tough
structure.
Dimensions
Size mm Weight
DN D L1 L2 H1 H2 H3 H4 S kgs
15/20 70 150 105 155 -- 175 240 325 5
25 80 170 120 175 -- 200 260 360 7
32 100 195 145 215 -- 245 330 450 11
40 120 225 190 260 -- 295 390 550 16
50 155 270 225 280 -- 320 410 550 22
65 200 320 265 345 -- 395 530 750 45
80 200 340 265 380 -- 440 575 800 50
100 250 405 315 425 -- 495 630 925 75
125 285 390 365 615 475 700 850 1300 100
150 320 450 400 680 510 780 940 1450 130
200 350 500 -- 710 345 850 960 1610 160
250 425 600 -- 1000 555 1170 1280 2260 290
Remark : S denotes basket removal height.
Unit Per Pc.
Type of Max. Working Screen Area
Flow Rate
CODE DN Cover Pressure
(m 3/h) (cm2)
Locking at 80 (bar) Basket Ring Type
87 20 51 15 16 3 120 -
52 20 16 3 120 -
53 25 Locking 16 4.5 180 -
54 32 Clamp 16 7 270 -
55 40 16 12 420 -
56 50 16 18 500 -
87 20 57 65 10 30 1160 -
58 80 Fast 10 45 - 1870
59 100 Locking 6 70 - 2550
60 125 Lever 6 110 - 3740
61 150 4 160 - 5700
87 20 62 200 Studs 10 280 - 6770
63 250 & Nuts 10 440 - 10000
Remark : The flow rate figures correspond to an inlet flow velocity of
2.5 m/s and screen perforations 0.08 mm;for suction pipes
we recommend that the flow rate be halved.
Econosto Model No.: 1097
Cast lron Mud Boxes(DIN)
Basket Type, According to DIN 87151
Flat Faced Flanged Ends to DIN PN 10
Material Specification
Angle
Unit Per Pc.
Size mm Weight
CODE DN
A B₂ H₃ S kgs
87 20 75 40 150 242 238 125 16
76 50 165 268 253 135 20
77 65 185 296 288 150 27
78 80 200 326 318 175 34
79 100 220 394 369 195 51
87 20 80 125 250 442 407 220 71
81 150 285 512 489 270 103
82 175 315 558 532 300 122
83 200 340 558 550 300 134
85 250 395 680 660 - 249
87 20 86 300 445 680 660 - 254
Econosto Model No.: 1188
Level Gauges for Oil (DIN)
Reflex Type
with Push-Button, Spring to Close
According to SOLAS Requirements
Materials
Part Material according to DIN
Body Steel St.35
Cover Plate Stainless Steel X5CrNi18 10
How to order : 87 - 20 - 91
Level gauge for oil (DIN), reflex type,
according to SOLAS requirements,
with push-button, spring to close,
LENGTH H in mm,
TYPE of CLASSIFICATION SOCIETY
Air Vent Heads
Головки воздухопроводов
Automatic closing system by disk float, and applicable to
ballast tanks or oil tanks, etc. Main body is made of grey iron
casting (FC-200). Connection flanges specifications are based
on JIS 5 kgf/cm².
Application of IACS (International Association of
Classification Societies) unified requirements P3(1991), and
approved by NK, ABS, LRS, DNV and BV.
Please specify the flange size to be connected with type
of pipe head when ordering.
Model: 53B
A
B
H
h
JIS5K-FF
Model: 53B
Unit Per Pc.
Dimensions mm Wgt.
CODE Model
Φd A B H h kgs
87 23 21 53B - 200 200 493 377 406 290 63
22 53B - 250 250 523 537 409 290 95
23 53B - 300 300 613 633 466 334 130
24 53B - 350 350 669 699 499 352 158
25 53B - 400 400 719 745 531 379 180
87 23 26 53B - 450 450 853 903 635 447 255
Name of Mfr.: Niikura Corporation
"W" MARK OF
w1
WITH SCREEN
53C(W)-125
150 ONLY
h1
H
h2
JIS5K-FF
t
Model: 53C
Unit Per Pc.
Dimensions mm Wgt.
CODE Model
Φd H h1 h2 t W1 W2 W3 kgs
87 23 35 53C-100 100 364 284 140 16 202 118 116 20
36 53C-125 125 433 342 180 16 260 152 143 35
37 53C-150 150 502 390 195 18 302 164 175 51
Name of Mfr.: Niikura Corporation
h1
H
h2
JIS5K-FF
t
Model: 53P
Unit Per Pc.
Dimensions mm Wgt.
CODE Model
Φd H h1 h2 t W1 W2 W3 kgs
87 23 45 53P- 50 50 264 221 112 14 162 92 127 14
46 53P- 65 65 264 221 122 14 162 92 132 15
47 53P- 80 80 300 248 132 14 190 98 152 20
48 53P-100 100 366 286 152 16 202 118 162 25
49 53P-125 125 435 344 197 16 260 152 202 41
87 23 50 53P-150 150 502 392 222 18 302 164 242 60
51 53P-200 200 640 487 282 20 350 250 272 108
52 53P-250 250 767 589 342 22 450 310 332 182
Name of Mfr.: Niikura Corporation
Model: 53PW (with Screen)
Unit Per Pc.
Dimensions mm Wgt.
CODE Model
Φd H h1 h2 t W1 W2 W3 kgs
87 23 53 53PW- 50 50 264 221 112 14 162 92 127 14
54 53PW- 65 65 264 221 122 14 162 92 132 15
55 53PW- 80 80 300 248 132 14 190 98 152 20
56 53PW-100 100 366 286 152 16 202 118 162 25
57 53PW-125 125 435 344 197 16 260 152 202 41
87 23 58 53PW-150 150 502 392 222 18 302 164 242 60
59 53PW-200 200 640 487 282 20 350 250 272 108
60 53PW-250 250 767 589 342 22 450 310 332 182
Name of Mfr.: Niikura Corporation
Emergency Shut-off Valves
For marine use on tanks containing oil fuel, lub. oil and
other flammable oil which are required to have valves closed
from safe positions outside the space concerned.
Made of cast iron and available two types of style : Globe
type and Angle type, and also available two types of operation:
Pneumatic Control type and Wire Rope Pull type as shown
below, for flange specification, JIS type.
Shut-off Operation ;
The Pneumatic Control Type: Only open the compressed air
supply valve connected from
air reservoir. Air reservoir
should be kept certain pres
sure between 0.39 MPa and
0.89 MPa.
The Wire Rope Pull Type: Only pull the lever connected
with wire rope. For manual shut,
these valves are able to close
with handle wheel by rotating
in clockwise direction.
Reset after Shut-off
1. Rotate clockwise until a head of piston is set in the grooving
on spindle, and then rotate counterclockwise the handle to
set valve in full open condition.
2. For small size valves (Max. 3") under the low level of liquid
in tank (max. 5 mtr height), the valves can be reset with one
touch by lifting the handle upward.
* Regarding Pneumatic Control Type, 1 or 2 should be
applied after air supply valve is closed.
Клапаны аварийного
выключения
Straight
Angle
Material Specification
Component Material EN and/or DIN
Body Ductile Cast Iron GJS-400-18-LT
(GGG-40.3)
Bonnet Steel
Disc Stainless Steel -(X15Cr13)
Seat Stainless Steel -(X15Cr13)
Stem Stainless Steel -(X15Cr13)
Gland Packing FPM (Viton)
(O-ring)
Cylinder Brass
Spring Spring Steel
Retainer Block Brass
Handwheel Steel