Professional Documents
Culture Documents
Function Statement..................................................................................................................................................................................2
Main Parameters & Specifications........................................................................................................................................................ 2
Connection Diagram - Volvo 2011-2015 ...........................................................................................................................................3
Buttondescription- Volvo 2011-2015 Installation instructions ..........................................................................................................4
Installation instructions 1 - Volvo 2011-2014 .....................................................................................................................................5
Installation instructions 2- Touchscreen - Volvo 2011-2014 ...........................................................................................................6
Installation instructions 3- Touchscreen - Volvo 2011-2014 ...........................................................................................................6
Voice Settings 2011-2014.....................................................................................................................................................................6
Wireless
Apple Carplay & Android Auto Connection Diagram Volvo 2015-2018 ............................................................................................................................................7
ButtonFunctionVolvo 2015-2018.........................................................................................................................................................7
Installation instructions- Volvo 2015-2018 .......................................................................................................................................8
Before starting your project, first read the complete installation manual according your Volvo make and model.
Explicit, if applicable, the touchscreen installation steps!
Page 2-13
Disconnect Battery before working on electronic components and beware of static electricity discharge on display components!!
Connection Diagram - Volvo 2011-2014
Note:
Note:
Touch screen is The AUX plug of CarPlay needs to
optional be connected to the AUX interface
of the original car
Take out the CarPlay flat cable to connect the main
board of the screen and the PCB of CarPlay
WiFi antenna
Connect the screen Connect the screen of
of the original car Connect the head unit of the Connect the head unit
Page 3-13
the original car unplug
original car unplug power of the original car
plug
cord
Button description-Volvo2011-2015 Installation instructions 1 - Volvo 2011-2014
Tools
1. Remove Panel
Previous song / Next song
2. 1 T20 screwdriver
3. 1 T10 screwdriver(some car models need it to dis-assembly the glovebox)
4. Tape and towel-protect the trim and panel, collect harness
Wake up Siri (Mute button for the old Volvo)
Left and right knob function 1. Note that there are two screws on 2. Remove the air-conditional panels 3. Unscrew the screws on the center 4. Take out the control panel.(Note to 5. Unscrew the 2 screws on the head
the back of the center control panel and trim via plastic panel remover. (Note disconnect the connector behind the
control panel
CAM the old Volvo center control panel here is the CAM button or Confirm that need to be unscrewed to disconnect the connector behind the panel) unit
panel)
blank
Return
6. Take out the head unit and unplug 7. Remove the trim panel of the 8. Unscrew the screws on the 9. Take out the screen, unplug all the
Page 4-13
the main line behind the head unit screen screen plugs on the back of the screen
Installation instructions 2 - Volvo 2011-2014
16. Lead the CarPlay main line and 17. Connect the screen adapter 18. And connect the other end to the 19. Connect the main line 20. And connect the other end to 26. Connect CarPlay's Bluetooth 27. Note that the AUX plug of 28. After the installation is complete, 29. Enter the media interface of the 30. Long press the EXIT button on
LVDS line from the inside of the cable on the CarPlay main line original car's screen plug of CarPlay to the original car head unit the main line of the original car antenna, WiFi antenna and usb cable CarPlay needs to be connected to you can restore the original car original car system through the MEDIA the steering wheel to switch the
to the screen to the box; Connect the CarPlay LVDS the AUX interface of the original layout CarPlay system
screen to the passenger floor button, select AUX
cable and the white plug of the main car
cable to the box
Voice Setting
21. Take out the CarPlay touch screen, 22. Take out the PCB board of the touch 23. Connect the touch screen cable of 24. Connect the touch screen cable
tear off the protective film and stick it screen and connect the cable of the CarPlay to the PCB board to the box
on the original car screen touch screen to the PCB board (the chip
of the touch screen can be glued here)
1. The AUX plug of CarPlay needs to 2. Enter the media interface of the 3. Long press the EXIT button on 4. Enjoy wireless CarPlay after
be connected to the AUX interface of
the original car
original car system through the MEDIA
button,
the steering wheel to switch the
CarPlay system
connecting your phone.
Page 6-13
Connection Diagram Volvo 2015-2018
Note: ButtonFunctionVolvo2015-2018
Note:
Suitable for 5.8 inch
Touch screen is
optional, need to be small screen, suitable Previous song / Next song
purchased separately for large screen 7.0
inch
Connect the head unit of the original car Long press to switch
CarPlay / original car
system
Connect the USB cable
Connect the head unit of the
original car unplug power
cord
Video Output
Bluetooth antenna
Connect the microphone (support
the original car microphone, may Left and right knob function
not be connected)
Negative Terminal
Permanent 12 V Confirm
ACC Detection cable
Connect the USB port of the original car the head unit of the original car
Page 7-13
Installation instructions - Volvo2015-2018
The non-touch screen version of CarPlay does not require the following installation
Deze moet nog ergens staan Connect the touch screen cable of Connect the touch screen cable of
Tools
1. 1 Remove Panel
2. 1 T20 screwdriver
3. 1 T10 screwdriver(some car models need it to dis-assembly the glovebox)
4. Tape and towel-protect the trim and panel, collect harness
11. Put all harness through 21. Take out the CarPlay 22. Take out the PCB board of 23. CarPlay to the PCB board
3. Remove the whole console 4. There are 2 screws on 5. Remove the 48pin connector 12. Connect the power cable, LVDS 13. Insert the audio USB-AUX 14. The installation is finished, put
1. Remove the air-conditional 2. Unscrew the 2 screws at the 15. Choose iPod. (If original car 16. Long press EXIT button on the
control panel multimedia head unit, unscrew cable, Note: If there is FIBER cable, and USB cable with iSmart cable into car USB port.(if original back all panels. Enter the media
panels and trim via plastic panel corner have AUX, choose AUX; ) wheel to switch to carplay interface
them and take out the box cable on original 48pin connector, box car have AUX, omit this step) interface of the original car system.
remover. (Note to disconnect the
connector behind the panel) please remember to remove it.
17. You can check CarPlay's 18. Open the phone Bluetooth, 19. Pay attention to the
6. Remove the LVDS cable 7. Insert the iSmart box 48pin 8. Connect its another side with 9. Connect iSmart LVDS cable 10.Insert another side into 20. CarPlay Phone will ask youwhether to use
Bluetooth name and other and keep WIFI on; search and information in the pop-up
(normally blue one) connector into multimedia head original car 48pin connector with original car LVDS cable multimedia head unit carplay, please choose allow. Carplay
unit. Insert the original FIBER
cable into iSmart 48pins
information on the Bluetooth
interface of the CarPlay system
connect CarPlay Bluetooth window of the mobile phone,
click on pairing
connection successes Page 8-13
connector.
Wireless iPhone CarPlay Connection Method Wireless CarPlay Connection Method
1. iPhone
Click the 【Bluetooth】icon in the system main interface to enter the Bluetooth connection interface
Home Turn on the phone WLAN
Back
2. Search for bluetooth devices
Clear bluetooth list
3. Allow pairing device
CarPlay
Note: If the phone is connected to CarPlay, you need to iPhone Android Auto APP
Select the phone type as iPhone
turn on the phone and turn off the WiFi Before connecting to use Android Auto,you need to download and install Android Auto App on your phone in advance
Home
Back
1. Turn on the phone WiFi and keep it 2. Confirm the use of the Bluetooth
on, then enter the phone Bluetooth connection
interface, click and connect device
Bluetooth
Camera selection
3. Select "5.0 GHz Band" for the hotspot AP band; (If there is
Speech button Off Steering wheel voice button
no such option, check the “Show advanced options” first)
Then save the setting and turn on the "Personal Hotspot" switch switchRight camera switch
Page 12-13
iPhone / Android Phone Setting / i Ph on e /
CarPlay System - Setting - System - Factory mode (The password is 8818) - Factory setting
Android phone interconnection is off Apply - Sync, Reboot After the setting is complete, you need to click Apply-Sync, and then return to the
interface below, click Reboot to restart the system, and wait for the system to restart, the selected settings
will take effect
Carlife
CarLife interconnected
GooglePlay
GooglePlay interconnected
IPhone CarPlay
IPhone CarPlay interconnected is off