Professional Documents
Culture Documents
TRUE/FALSE
1. A single-handle lavatory faucet blends the hot and cold water with the use of one handle, and the spout
is located directly below the handle.
ANS: T
A single-handle faucet blends the hot and cold water with the use of one handle, and the spout is
located directly below the handle.
PTS: 1
2. The two-handle lavatory faucet design requires a user to operate both handles to achieve a desired
temperature.
ANS: T
The two-handle design requires a user to operate both handles to achieve a desired temperature
PTS: 1
3. Most codes dictate that a vacuum breaker must be installed when a handheld shower is installed if the
handheld could be submerged in water.
ANS: T PTS: 1
4. Many popular kitchen sink faucet designs have a pull-out spout that is also the spray unit, but this does
not eliminate ordering a four-hole sink.
ANS: F
Many popular kitchen sink faucet designs have a pull-out spout that is also the spray unit, which
eliminates ordering a four-hole sink.
PTS: 1
5. Most pull-out spout kitchen sink faucets are not manufactured with an integral check valve to
eliminate backflow.
ANS: F
Most pull-out spout kitchen sink faucets are manufactured with an integral check valve to eliminate
backflow
PTS: 1
ANS: F
Not all faucets are compatible with all sink designs.
PTS: 1
7. Many bidets require a backflow prevention device to be installed.
ANS: T PTS: 1
MULTIPLE CHOICE
1. A ____ is a removable threaded housing for a screen attached to a faucet spout, which creates a
uniform flow stream.
a. Port opening c. Aerator
b. Pop-up d. None of the above
ANS: C PTS: 1
2. A ____ is a drain assembly for lavatory sinks and bidets and is abbreviated as PO.
a. Port opening c. Aerator
b. Pop-up d. None of the above
ANS: B PTS: 1
3. A ____ is an opening in a fixture, such as a drain or overflow hole that receives drain assemblies, to
connect the fixture to the drain system.
a. Port opening c. Aerator
b. Pop-up d. None of the above
ANS: A PTS: 1
COMPLETION
1. The most common lavatory designs have a _____" spread between the hot and cold handles.
ANS: 4
PTS: 1
ANS: Escutcheon
PTS: 1
3. _______________ is the color or polish of a faucet, drain assembly or other fixture trim item.
ANS: Finish
PTS: 1
Test Bank for Residential Construction Academy Plumbing, 2nd Edition
ANS: Trim
PTS: 1
PTS: 1
6. ____________________ faucets are installed for large-capacity tubs, such as a garden (roman) tub or
whirlpool.
ANS: Deck-mounted
PTS: 1
7. The most common type of kitchen faucet requires a sink that has three faucet holes that are _____"
apart, or _____" from the hot and cold water supply connections to the faucet.
ANS: 4, 8
PTS: 1
8. Many faucet manufacturers offer unique designs that allow a spray unit to be installed without having
to install a four-hole sink by having the spray unit manufactured in the faucet
____________________.
PTS: 1
9. Most codes dictate that the largest size foreign object that can enter a drainage system be _____" in
diameter.
ANS: 1/2
PTS: 1
PTS: 1
11. _____________________ are available in 0.5 gallon per minute (gpm) style to adhere to water
conservation objectives.
ANS: Aerators
PTS: 1