Professional Documents
Culture Documents
A3 - Sil Screw Press
A3 - Sil Screw Press
SIL
SCREW PRESS by GS Agro Engineering Sdn Bhd
MOVING PLATE
1. Plate design is for optimum pressing and Tapper lock pulley Press Cage With Roller for easy
Split bearing housing maintenance
more efficient to cone Tapered Holes
2. No more cone
3. No more lengthening shaft P15
4. Easier for maintenance, screw or press cage
replacement, minimizing overhaul and downtime Capacity 14-17 tons FFB per hour
Dimension 90 mm width x 630 mm height x 4600 mm long
Weight 4600 kg
Power 30 KW, 40 HP, 4 Poles (electrim Power Motor)
Speed 9-13 rpm
Drive SEW Eurodrive M3PSF50SPD
WWW.SERUMPUNINDAH.COM WWW.SERUMPUNINDAH.COM
WWW.SERUMPUNINDAH.COM
SEPARATED/REPLACEABLE
Electrim Power Motor
Extra gap between
press body box & Worm screw
BEARING HOUSING
The best electric motor for PALM OIL MILL bearing section with 4 1/4 worm design
HYDRAULIC SYSTEM
DEVELOPMENT :
Weight 6500 kg
Power 45 KW, 60 HP, 4 Poles (electrim Power Motor)
Speed 8-10 rpm GS PRESS (P15) AND (P25) is developed from the best selection and successful marriage of technology,
Drive SEW Eurodrive M3PSF60KPD fabrication and operation experts:
1. Benchmarking robust & rugged rubber machinery
2. Engaging SKF Bearing Specialist
3. ‘Hands-On’ Hydraulic System Designer using Heavy Duty Components
Material used : Performance : P15 P25
4. Working closely with experience Palm Oil Mill engineers
Press body : M.S/S.S Oil loss on Non Oil Solid 6,5 % - 7,5 % 6,5 % - 7,5 % 5. Using Disciplined, well skilled fabricators
Worm screw : Cast Steel / Chrome molly (NOS) - - 6. Pressing Section has common dimensions wear components. This will not put the users to a
Press cage : M.S Oil loss in wet methods 4% 4% disadvantage in the use of the press
Strainer : S.S Nut and Kernel Breakage 7% - 8% 7% - 8% GS PRESS (P15) AND (P25) Is indeed very robust for reliable operation capable of high oil recovery
Main shaft : EN24 Working Ampere 40 – 45 Amp 49 – 51 Amp efficiency.
Spur gear : EN9 The designs overcome failures on drive shafts/key/keyway fracture; broken tie-rods; premature bearings
failures, bearings contamination; screwworms; press casing distortion.
GS PRESS (P15) AND (P25) PRESS DESIGN is now being patented.
WWW.SERUMPUNINDAH.COM WWW.SERUMPUNINDAH.COM