You are on page 1of 1

Class 10- physics test

1. An electronic iron draws a current of 0.5 A when voltage is 200 V . Calculate the amount of charge
flowing through it in one hour.. (p1house. (1/3)

2. A 4 ohm wire is double on it. Calculate the new resistance of wire.(3/1)

3. A metal wire of resistivity 64 × 10-⁸ ohm -cm.The length of wire is 198cm has the resistance 7 ohm.
Calculate the radius of wire. (3/5)

4. Three resistors of 6 ohm,2 ohm and x are connected into series to a cell of emf 1.5 V. The current
registered is (1/6)A. Calculate the value of x. (10/9)

5. An electronic bulb of resistance 400 ohm. Drawn a current of 0.5 A. Calculate the power of bulb and
The potential difference in the end of wire. (15/5)

6. A wire is drawn such that its radius change from r to 2r. Find its new resistance.(37/11)

7. Why are filament of incandescent lamps made of tungsten WIRE? (32/3)

8. Two lamps, one rated 100 W at 220 volt and the other 60 Watt at 220 volt, are connected in parallel
to the electric main supply. What current is drawn from the line if the supply voltage is 220V? (24/15)

9. A Copper wire has a diameter of 0.5 mm and a resistivity of 1.6 ×10-6 ohm cm. how much of this wire
would be required to make a 10 ohm coil. how much does the resistance change if the diameter is
double? (21/6)

10. A bulb is rated at 200 volt- 100 watt. What is its resistance? find such bulb burn for 4 hours. What is
the electrical energy consume? Calculate the cost if the rate is rupees 4.60 per unit.

You might also like