Professional Documents
Culture Documents
Brocade Icx 7250 Ds
Brocade Icx 7250 Ds
1
Support on the Brocade ICX 7150 to be available in a future release.
2
Organizations also can use hot-insertion/
removal of stack members to avoid
interrupting service when adding a switch
to increase the capacity of a stack or
replacing a switch that needs servicing.
Figure 2: Brocade Campus Fabric technology. Brocade ICX 7250 Switches also offer
an external power supply for failover
resiliency, as well as increased PoE/PoE+
Brocade ICX switches support a flexibility. The Brocade ICX 7250-24P port availability.
Distributed Chassis deployment model provides 370 watts and can deliver PoE
that uses standards-based optics and power to all 24 ports, while the Brocade
cabling interface connections to help ICX 7250-48P provides 740 watts and
BROCADE CAMPUS FABRIC
ensure maximum distance between can deliver PoE+ power for up to 12 or 24
TECHNOLOGY
campus switches—up to 80 km—and ports. Both switches can provide PoE and
Brocade Campus Fabric technology
minimum cabling costs—up to 50 percent PoE+ (30 watts) power to all ports when
brings campus networks into the modern
less than incumbent solutions. This gives an external power supply is deployed. era to better support seamless wireless
organizations the flexibility to deliver ports mobility, security, and ease of application
The optional Brocade ICX-EPS 4000
wherever they are needed on campus deployment. This innovative technology
is an external power supply source that
at a fraction of the cost. The Distributed collapses multiple network layers into a
delivers additional power for up to 16 single logical switch, flattening the network
Chassis design future-proofs campus
Brocade ICX 7250 Switches (see Figures and eliminating deployment complexity
networks by allowing networks to easily
3 and 4). It can be used for system power while simplifying network management and
and cost-effectively expand in scale and reducing operating costs.
redundancy and an increased PoE/PoE+
capabilities.
power budget to enable additional ports. Brocade Campus Fabric technology
enables organizations to build networks
Full Layer 3 Capabilities EEE Power Savings that deliver:
Brocade ICX 7250 Switches offer an
The Brocade ICX 7250 Switch supports •• Consolidated management: Reduces
upgrade option to bring full Layer 3
the IEEE 802.3az standard for Energy unnecessary network layers to create
capabilities to the network edge, reducing
Efficient Ethernet (EEE), reducing power large management domains that
complexity and enhancing the reliability of eliminate individual switch touch points,
consumption during periods of low
enterprise networks. reducing maintenance time and costs.
utilization. Ports are placed into a low
power mode when no data is being •• Shared network services: Allows
Power to Spare premium and entry-level switches to
The Brocade ICX 7250 can deliver transmitted.
mesh together into a single logical
both power and data across network switch and share advanced Layer 2/3
Enterprise-Class Availability services, delivering lower price-per-port
connections, supporting Power over
When every second matters, Brocade ICX functionality without compromising
Ethernet (PoE/PoE+) standards and
7250 Switches help deliver continuous performance.
providing a single-cable solution for
availability to optimize the user experience. •• Scale-out networking: Integrates high-
edge devices, such as wireless access
Brocade stacking technology delivers performance, fixed form-factor switches
points, VoIP phones, video surveillance
high availability, performing real-time to create a single distributed logical
equipment, and VDI thin terminals. switch that is independent of physical
state synchronization across the stack and
Carrying data and power through a single location and allows organizations to add
enabling instantaneous hitless failover to
Ethernet wire reduces the number of ports whenever and wherever needed
a standby controller in the unlikely event
power receptacles and power adapters across the campus without adding
of a failure of the master stack controller. complexity.
while increasing reliability and wiring
3
SDN-Enabled Programmatic
Control of the Network
Software-Defined Networking (SDN)
is a powerful new network paradigm
designed for the world’s most demanding
networking environments and promises
Figure 3: Brocade ICX-EPS 4000 for the Brocade ICX 7250, shown with four AC power supplies. breakthrough levels of customization,
scale, and efficiency. The Brocade ICX
7250 enables SDN by supporting
the OpenFlow 1.3 protocol, which
allows communication between an
OpenFlow controller and an OpenFlow-
enabled switch. Using this approach,
organizations can control their networks
programmatically, transforming the
network into a platform for innovation
through new network applications
and services.
Figure 4: Rear view of the Brocade ICX-EPS 4000 connectivity. The Brocade ICX 7250 delivers
OpenFlow in true hybrid port mode, which
allows organizations to simultaneously
Simplified, Open-Standards- Simplified, Automated deploy traditional Layer 2/3 forwarding
based Management and Deployment with with OpenFlow on the same port. This
Auto-Provisioning unique capability provides a pragmatic
Monitoring
The Brocade ICX 7250 supports auto- path to SDN by enabling network
The Brocade ICX 7250 provides
provisioning, simplifying deployment administrators to progressively integrate
simplified, standards-based management
with a truly plug-and-play experience. OpenFlow into existing networks, giving
capabilities that help organizations reduce
Organizations can use this feature them the programmatic control offered by
administrative time and effort while
to automate IP address and feature SDN for specific flows while the remaining
securing their networks.
configuration of the switches without traffic is forwarded as before. Brocade ICX
sFlow-based “Always-On” requiring a highly trained network engineer 7250 hardware support for OpenFlow
Network Monitoring onsite. When the switches power up, enables organizations to apply these
sFlow is a modern, standards-based they can automatically receive their capabilities at line rate.
network export protocol (RFC 3176) IP addresses and configuration files
that addresses many of the challenges from DHCP and Trivial File Transport Plug-and-Play Operations
that network managers face today. By Protocol (TFTP) servers. They also can for Powered Devices
automatically receive a software update to Brocade ICX switches support the
embedding sFlow hardware support into
be at the same code revision as currently IEEE 802.1AB Link Layer Discovery
the Brocade ICX 7250, Brocade delivers
installed switches. Protocol (LLDP) and ANSI TIA 1057
an “always-on” technology that operates
Link Layer Discovery Protocol-Media
with wire-speed performance. sFlow
Open-Standards Management Endpoint Discovery (LLDP-MED)
dramatically reduces implementation
The Brocade ICX 7250 includes an standards that enable organizations
costs compared to traditional network
industry-standard Command Line to deploy interoperable multivendor
monitoring solutions that rely on mirrored
Interface (CLI) and supports Secure solutions for Unified Communications
ports, probes, and line-tap technologies.
Shell (SSHv2), Secure Copy (SCP), (UC). Configuring IP endpoints such as
Moreover, sFlow gives organizations full,
and SNMPv3 to restrict and encrypt VoIP phones can be a complex task,
enterprise-wide monitoring capability for
management communications to the requiring manual and time-consuming
every port in the network.
system. In addition, support for Terminal configuration. LLDP and LLDP-MED
Access Controller Access Control System provide a standard, open method for
(TACACS/TACACS+) and RADIUS configuring, discovering, and managing
authentication helps ensure secure network infrastructure.
operator access.
4
Unified Wired/Wireless Affordable Acquisition
BROCADE ICX 7250 SWITCH AND
Network Management with CONTROLLER INTEROPERABILITY
Options
Brocade Network Advisor Brocade Capital Solutions helps
The Brocade ICX 7250 Switch operates
Managing enterprise campus networks organizations easily address their IT
seamlessly under the Brocade SDN
continues to become more complex due Controller. This controller is a quality- requirements by offering flexible network
to the growth in services that rely on wired assured edition of the OpenDaylight acquisition and support alternatives.
and wireless networks. Services such controller code supported by an established Organizations can select from purchase,
as Internet, e-mail, video conferencing, networking provider and its leaders within lease, Brocade Network Subscription,
the OpenDaylight community.
real-time collaboration, and distance and Brocade Subscription Plus options to
learning all have specific configuration align network acquisition with their unique
and management requirements. At the capital requirements and risk profiles. To
learn more, visit
same time, organizations face increasing Warranty
demand to provide uninterrupted services www.brocade.com/capitalsolutions.
Brocade ICX 7250 Switches are covered
for high-quality voice and UC, wireless by the Brocade Assurance® Limited
mobility, and multimedia applications.
Maximizing Investments
Lifetime Warranty. For details, visit To help optimize technology investments,
To reduce complexity and the time www.brocade.com/warranty. Brocade and its partners offer complete
spent managing these environments, solutions that include professional
the easy-to-use Brocade Network
Best-in-Class Support
services, technical support, and education.
The Brocade ICX 7250 Switch is
Advisor discovers, manages, and For more information, contact a Brocade
supported by next-business-day advance
deploys configurations to groups of IP sales partner or visit www.brocade.com.
replacement where available, as well as
devices. By using Brocade Network
software defect repairs and maintenance
Advisor, organizations can configure
updates. In an effort to further improve
Virtual LANs (VLANs) within the network,
service levels and operational efficiency,
manage wireless access points, and
Brocade includes three years of technical
execute commands on specific IP
support for Brocade ICX 7250 Switches,
devices or groups of IP devices. sFlow-
providing direct 24×7 access to the
based proactive monitoring is ideal for
Brocade Technical Assistance Center.
performing network-wide troubleshooting,
generating traffic reports, and gaining Brocade Global Services
visibility into network activity from the Brocade Global Services has the
edge to the core. Brocade Network expertise to help organizations build
Advisor centralizes management of the scalable, efficient cloud infrastructures.
entire family of Brocade wired products Leveraging 20 years of expertise in
and Ruckus wireless products. storage, networking, and virtualization,
Brocade Global Services delivers world-
Data Center ToR Server
class professional services, technical
Connectivity
support, network monitoring services,
The Brocade ICX 7250 is designed to fit
and education, enabling organizations
in server racks by consuming only one
to maximize their Brocade investments,
rack unit. In data center environments
accelerate new technology deployments,
where most servers are 1 GbE-capable,
and optimize the performance of
the Brocade ICX 7250 provides a
networking infrastructures.
compact and cost-effective 1 GbE Top-
of-Rack (ToR) switch by simply connecting
5
Brocade ICX 7250 Feature/Model Comparison
Switching capacity
128 Gbps 208 Gbps 256 Gbps 208 Gbps 256 Gbps
(data rate, full duplex)
Forwarding capacity (data rate, full duplex) 96 Mpps 154 Mpps 190 Mpps 154 Mpps 190 Mpps
PoE/PoE+ ports 24 48
Aggregated stacking bandwidth 480 Gbps 480 Gbps 480 Gbps 480 Gbps
Stacking density
12 12 12 12
(maximum switches in a stack)
Stacking ports
Up to 4×10 GbE SFP+ per switch
(maximum ports2 usable for stacking)
Power
Power supply rated maximum (AC) 135 W 135 W 135 W 525 W 880 W
6
Brocade ICX 7250 Feature/Model Comparison (Continued)
24 RJ-45 Ports 24 or 48 Ports Non-PoE 24 or 48 PoE+ Ports
Environment
48 port: 440 mm (17.323 in.), W×370 mm (14.56 in.), D×43.7 mm (1.720 in.), H — 1U
Dimensions
24 port: 440 mm (17.323 in.), W×280 mm (11.02 in.), D×43.7 mm (1.720 in.), H — 1U
12,000 (IPv4)
Maximum routes (in hardware) 2,048 (IPv6)
7000 (Next Hop Addresses)
7
Brocade ICX 7250 Specifications (Continued)
QoS Priority Queues 8 per port
8,192 (Layer 2)
Multicast Groups
8,192 (Layer 3)
Base Layer 3 IP routing •• IPv4 and IPv6 static routes •• Host routes
•• RIP v1/v2, RIPng •• Virtual interfaces
•• ECMP •• Routed interfaces
•• Port-based Access Control Lists •• Route-only support
•• Layer 3/Layer 4 ACLs •• Routing between directly connected subnets
Premium Layer 3 IP routing •• IPv4 and IPv6 dynamic routes •• Virtual Route Redundancy Protocol (VRRP)
•• OSPF v2, v3 •• VRRP-E (IPv4/IPv6)
•• PIM-SM, PIM-SSM, PIM-DM, PIM passive •• VRRP v3 (IPv6)
(IPv4/IPv6 multicast routing functionality) •• IPv6 over IPv4 tunnels
•• PBR •• VRF (IPv4 and IPv6)
Quality of Service (QoS) •• ACL Mapping and Marking of ToS/DSCP •• MAC Address Mapping to Priority Queue
•• ACL Mapping and Marking of 802.1p •• Priority Queue Management using Weighted Round
•• ACL Mapping to Priority Queue Robin (WRR), Strict Priority (SP), and a combination of
WRR and SP
•• Classifying and Limiting Flows Based on TCP Flags
•• Priority Flow Control
•• DiffServ Support
•• Honoring DSCP and 802.1p
Traffic management •• ACL-based inbound rate limiting and traffic policies •• Inbound rate limiting per port
•• Broadcast, multicast, and unknown unicast rate •• Outbound rate limiting per port and per queue
limiting
8
Brocade ICX 7250 Specifications (Continued)
Security •• 802.1X Accounting •• Protection against Denial of Service (DoS) attacks
•• MAC Authentication •• Authentication, Authorization, and Accounting (AAA)
•• Flexible authentication •• MAC Address Locking; MAC Port Security
•• Web authentication •• Advanced Encryption Standard (AES) with SSHv2
•• DHCP snooping •• RADIUS/TACACS/TACACS+
•• Dynamic ARP inspection •• Secure Copy (SCP)
•• ND Inspection (Neighbor Discovery) •• Secure Shell (SSHv2)
•• Bi-level Access Mode (Standard and EXEC Level) •• Username/Password
•• EAP pass-through support •• Change of Authorization (CoA) RFC 5176
•• IEEE 802.1X username export in sFlow
SDN features •• Support for OpenFlow v1.0 and v1.3 •• Operates seamlessly under the Brocade SDN
•• OpenFlow support with true hybrid port mode Controller
RFC standards compliance For a complete list of RFCs supported by the Brocade ICX 7000 product family, please
visit www.brocade.com/icx7rfc.
Traffic management •• ACL-based inbound rate limiting and traffic policies •• Inbound rate limiting per port
•• Broadcast, multicast, and unknown unicast rate •• Outbound rate limiting per port and per queue
limiting
High availability •• Layer 3 VRRP protocol redundancy •• Hot insertion and removal of stacked units
•• Real-time state synchronization across the stack •• Layer 2 VSRP switch redundancy
•• Hitless failover from master to standby stack controller •• In-Service Software Update (ISSU)
9
Brocade ICX 7250 Specifications (Continued)
Network and Device Management
Brocade Campus Fabric •• The Brocade ICX 7250 can operate in fabric Port
technology Extender (PE) mode
•• Up to 36 PEs per fabric
•• PE Cascade depth up to 6 units
Environment
Compliance/Certification
Electromagnetic emissions FCC Class A (Part 15); EN 55022/CISPR-22 Class A; VCCI Class A; ICES-003 Electromagnetic Emission;
AS/NZS 55022; EN 61000-3-2 Power Line Harmonics; EN 61000-3-3 Voltage Fluctuation and Flicker; EN
61000-6-3 Emission Standard (supersedes: EN 50081-1)
Safety CAN/CSA-C22.2 NO. 60950-1-07; UL 60950-1 Second Edition; IEC 60950-1 Second Edition; EN
60950-1:2006 Safety of Information Technology Equipment; EN 60825-1 Safety of Laser Products—Part
1: Equipment Classification, Requirements and User’s Guide; EN 60825-2 Safety of Laser Products—Part 2:
Safety of Optical Fibre Communication Systems
Immunity EN 61000-6-1 Generic Immunity and Susceptibility (supersedes EN 50082-1); EN 55024 Immunity
Characteristics (supersedes EN 61000-4-2 ESD); EN 61000-4-3 Radiated, Radio Frequency,
Electromagnetic Field; EN 61000-4-4 Electrical Fast Transient; EN 61000-4-5 Surge; EN 61000-4-6
Conducted Disturbances Induced by Radio-Frequency Fields; EN 61000-4-8 Power Frequency Magnetic
Field; EN 61000-4-11 Voltage Dips and Sags
10
Brocade ICX 7250 Ordering Information
Part Number Description
Brocade ICX 7250 Switch, 24×10/100/1000 ports, 4×1 GbE SFP uplink ports (non-upgradable), Layer 2 only,
ICX7250-24G
front-to-back airflow, no EPS connector
Brocade ICX 7250 Switch, 24×10/100/1000 ports, 8×1 GbE SFP upgradable to up to 8×10 GbE SFP+
ICX7250-24
uplink/stacking-ports with license, basic Layer 3 (static routing and RIP), side-to-back airflow
Brocade ICX 7250 Switch, 24×10/100/1000 PoE+ ports, 8×1 GbE SFP upgradable to up to 8×10 GbE SFP+
ICX7250-24P
uplink/stacking-ports with license, 370 W PoE budget, basic Layer 3 (static routing and RIP), side-to-back airflow
Brocade ICX 7250 Switch, 48×10/100/1000 ports, 8×1 GbE SFP upgradable to up to 8×10 GbE SFP+
ICX7250-48
uplink/stacking-ports with license, basic Layer 3 (static routing and RIP), side-to-back airflow
Brocade ICX 7250 Switch, 48×10/100/1000 PoE+ ports, 8×1 GbE SFP upgradable to up to 8×10 GbE SFP+
ICX7250-48P
uplink/stacking-ports with license, 740 W PoE budget, basic Layer 3 (static routing and RIP), side-to-back airflow
Brocade ICX 7250 Switch, 24×10/100/1000 ports, 6×1 GbE SFP and 2×10 GbE SFP+ uplink/stacking-ports
ICX7250-24-2X10G
upgradable to up to 8×10 GbE SFP+ with license, basic Layer 3 (static routing and RIP), side-to-back airflow
Brocade ICX 7250 Switch, 24×10/100/1000 PoE+ ports, 6×1 GbE SFP and 2×10 GbE SFP+ uplink/stacking-
ICX7250-24P-2X10G ports upgradable to up to 8×10 GbE SFP+ with license, 370 W PoE budget, basic Layer 3 (static routing and RIP),
side-to-back airflow
Brocade ICX 7250 Switch, 48×10/100/1000 ports, 6×1 GbE SFP and 2×10 GbE SFP+ uplink/stacking-ports
ICX7250-48-2X10G
upgradable to up to 8×10 GbE SFP+ with license, basic Layer 3 (static routing and RIP), side-to-back airflow
Brocade ICX 7250 Switch, 48×10/100/1000 PoE+ ports, 6×1 GbE SFP and 2×10 GbE SFP+ uplink/stacking-
ICX7250-48P-2X10G ports upgradable to up to 8×10 GbE SFP+ with license, 740 W PoE budget, basic Layer 3 (static routing and RIP),
side-to-back airflow
Brocade ICX-EPS 4000 External Power Supply Options for the Brocade ICX 7250 Switch
The Brocade ICX-EPS4000 supports up to four removable power supplies. Each power supply provides 920 W.
1U External Power Supply shelf (EPS) can support up to four 920 W removable power supplies
ICX-EPS4000-SHELF
(purchased separately).
License to upgrade any Brocade ICX 7250 (except ICX7250-24G) to Layer 3 Premium Features (OSPF, VRRP,
ICX7250-PREM-LIC
PIM, PBR, VRF), non-node lock license.
License to upgrade any Brocade ICX 7250 (except ICX7250-24G) from 8×1 GbE SFP to 6×1 GbE SFP and
ICX7250-2X10G-LIC-POD
2×10 GbE SFP+ uplink/stacking ports, node-lock license.
License to upgrade any Brocade ICX 7250 (except ICX7250-24G) from 6×1 GbE SFP and 2×10 GbE SFP+ to
ICX7250-8X10G-LIC-POD 8×10 GbE SFP+ uplink/stacking ports, node-lock license.
Only switches that already have 2×10 GbE ports can be upgraded to 8×10 GbE ports.
XBR-R000295 FRU, rack mount kit, four-post, 24 in. to 32 in. depth rack
Brocade Network Advisor IP management software license for up to 50 devices; required for initial purchase of IP-
BR-NTWADV-IP-BASE
only management; minimum of one year of support required
11
Brocade ICX 7250 Ordering Information (Continued)
1000BASE-BXD SFP optic SMF, transmits at 1,490 nm and receives at 1,310 nm, LC connector, single-strand
E1MG-BXD
SMF fiber. This optic should only be connected to an E1MG-BXU at the far end.
1000BASE-BXU SFP optic SMF, transmits at 1,310 nm and receives at 1,490 nm, LC connector, single-strand
E1MG-BXU
SMF fiber. This optic should only be connected to an E1MG-BXD at the far end.
E1MG-LHA-OM-T 1000BASE-LHA SFP optic, SMF, LC connector, optical monitoring-capable (70 km), industrial temperature
10G-SFPP-SR 10GBASE-SR, SFP+ optic (LC), target range 300 m over MMF
10G-SFPP-USR 10GE USR SFP+ optic (LC), target range 100 m over MMF, 1-pack
1000BASE-BXD SFP optic SMF, transmits at 1,490 nm and receives at 1,310 nm, LC connector, single-strand
E1MG-BXD
SMF fiber. This optic should only be connected to an E1MG-BXU at the far end.
1000BASE-BXU SFP optic SMF, transmits at 1,310 nm and receives at 1,490 nm, LC connector, single-strand
E1MG-BXU
SMF fiber. This optic should only be connected to an E1MG-BXD at the far end.
E1MG-LHA-OM-T 1000BASE-LHA SFP optic, SMF, LC connector, optical monitoring-capable (70 km), industrial temperature
For a list of cables and fiber optics approved for stacking, visit www.brocade.com/fastironstacking.
12
Ordering Instructions Legal Disclaimer
Customers have two options when Product features, functionality and
ordering a Brocade ICX 7250 Switch. specifications may change or be
They can order one of the five Brocade discontinued without notice. Nothing in
ICX 7250 Switch models with 1 GbE this document shall be deemed to create
uplink/stacking ports, or order a switch a warranty of any kind, either express or
preloaded with a PoD license for two implied, statutory or otherwise, including
10 GbE uplink/stacking ports. but not limited to, any implied warranties
of merchantability, fitness for a particular
The Brocade ICX 7250 (-24/-24P/-
purpose, non-infringement of third-party
48/-48P) can be upgraded to 2×10 GbE
rights or availability with respect to any
uplink/stacking ports by purchasing a PoD
products and services.
license (ICX7250-2X10G-LIC-POD).
Refer to www.brocade.com for the latest
A Brocade ICX 7250 Switch with
version of this document.
2×10 GbE uplink/stacking ports can be
upgraded to 8×10 GbE by purchasing
an additional PoD license (ICX7250-
8X10G-LIC-POD). Only switches that
already have 2×10 GbE can be upgraded
to 8×10 GbE.
© 2017 Brocade Communications Systems, Inc. All Rights Reserved. 03/17 GA-DS-1923-07
Brocade, the B-wing symbol, and MyBrocade are registered trademarks of Brocade Communications Systems, Inc., in the United
States and in other countries. Other brands, product names, or service names mentioned of Brocade Communications Systems, Inc.
are listed at www.brocade.com/en/legal/brocade-Legal-intellectual-property/brocade-legal-trademarks.html. Other marks may belong
to third parties.
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning
any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes
to this document at any time, without notice, and assumes no responsibility for its use. This informational document describes
features that may not be currently available. Contact a Brocade sales office for information on feature and product availability.
Export of technical data contained in this document may require an export license from the United States government.