”
ar
re
vier aieTRODUCTION
Thank you for choosing Duosat VORTEX , which will bring you a brand-new entertainment experience.
‘The Duosat VORTEX provides a variety of external interfaces, and can decode full High-Definition(HD) and
Standard-Definition(SD) contents,
This guide is for users who need instructions about how to install and set up full HD digital satellite
receiver, Antenna setting and Network setting
ACCESSORY
RCU Quick Guide HD Cable Power AdaptorBEFORE YOU BEGIN
* Side Panel * Front Panel
1. USB : Connect to the USB memory or external HDD
2. INDICATOR : Shows standby or operation modes
3, STANDBY : Switches between operation and standby modes
4B
* Rear Panel
1, DC 12V : Connect this to the AC/DC Power Adaptor
2, LNB A/B : Connect this to the satellite antenna
3. ETHERNET : Connect this to the nework with an Ethemet cable
4, DV OUT : Connect this to the TV using DV Out ConnectorSwitches between operation
and standby modes,
To select channels and
input of channel numbers
or characters.
Changes the video format : Switches between
Mutes or un-mutes the TV and Radio modes
audio temporarily
Adjusts the | Displays the 7 dow pages
audio volume "| on the menu and
APPS list TV/Radio List
Selects a menu or confirms igates the cursor
‘the selected operation on the menus
Returns to the Displays the channel and
Previous Channel program information
Displays the main menu Returns to the previous menu
Adjusts options
For Media player
Displays the subtitle Displays the audio list
language list r
Displays the Electronic Displays the favorite
Program Guide channel group listCeol eae ores ad las
+ Cabling to an High-Definition TV for Video and Audio
CONNECTING TO THE ANTENNA
You can select one of the following antenna connections depending on the equipment you have.
‘The product has two antenna modes according to antenna setting
1, Connecting to the an antenna with a dual LNB
LNBi
we
Connect the two antenna cables to a dual LNB to access two different channels at same time
even on the two different frequencies at same satelite.
This connection is useful watching a channel and recording on a different channel
independently at same time
2. Connecting to the two separate antennas
ANTENNA 1
ANTENNA 2
Connect the two antenna cables providing different broadcasting signals to your product.
You can configure LNB! and LNB? independently,EE £#§£+=-
* Satellite List
Satellite List allows you to set the selection of satellite,
i enon Cen ed
0058 fo 130
0059 Sallex6KU 1180
eerkL =FSErll (el
* Antenna Setup
Antenna Setup allows you to set the value of Satellite, LNB Frequency, Transponder,
Diseget.0, Diseqct.1, 22K and LNB Power,
* Ste
‘ABS 1 KU (75.08)
. Satellite : Select the required satellite using the OK or <> button and press the OK button,
. Tuner : Select the required tuner using the OK and > button and press the OK button,
. LNB Type : Select the required LNB Type using the OK or <> button and press the OK button,
. LNB Frequency : Select the required LNB frequency using the OK or <> button and press
the OK button,
Transponder : Select the required satellite using the OK or <> button and press the OK button,
}. 22KHz : Select On/Off/Auto using the OK or > button and press the OK button,
. LNB Power : Select On/Off using the OK or <> button and press the OK button,
. DISEqC Mode : Select the required DiSEgC input using the OK or <> button and press the
OK button,
DISEqC 1.0 : Select Port————)|)6FhCLlU
* Channel Search
Channel Search allows you to set various options for searching channels and
proceed to search.
%® ote
‘ABS 1 KU (75.08)
1, Polarization : Select polarity using using the OK or <> button and press the OK button.
2, Network Search : Select Yes/No using the OK or 4» button and press the OK button
3, Channel Type : Select Yes/No using the OK or «> button and press the OX button,
4, Scan Type : Select the mode of scan using the OK or > button and press the OK button,
5. Sort by Genre : Select on/off using the OK or <» button and press the OK button———— hESC rll
Network Setting allows you to configure the wired, wireless or 3G network connections
|. Link Type : Press the OK or 4» button. Select Wire / Wifi / 3G network using a¥ button and
press the OK button,
2, Config : Press OK button to select wifi network or to set static IP/DHCP,
Ping Test : Press the OK or <> button.
4, Preferred Storage : Select the preferred storage device.HIGHDE
FINTION
FOREVE
ORE
RYONE
VORTEX