Professional Documents
Culture Documents
Name :
Roll No :
Year/Dept :
Which of the following are typically made of sand, plaster, ceramics and similar
materials and generally are mixed with various binders?
a) Permanent molds
1
b) Expendable molds
c) Composite molds
d) Ceramic molds
Which of the following are made of metals that maintain their strength at high
temperatures?
a) Permanent molds
2
b) Expendable molds
c) Composite molds
d) Ceramic molds
Which of the following expandable molds are less heat conductors than metallic
molds?
a) metallic
3
b) nonmetallic
c) composite
d) ceramic
Which of the following are made of two or more different materials (combining the
advantages of each material)?
a) Permanent molds
4
b) Expendable molds
c) Composite molds
d) Ceramic molds
Which of the following casting process is used to make typical parts such as
gears, cams, valves, etc?
a) investment casting
12
b) ceramic-shell casting
c) evaporative-pattern casting
d) slush casting
In which of the following casting, two halves of a mold are made from materials
with high resistance?
a) investment casting
13
b) permanent-mold casting
c) evaporative-pattern casting
d) slush casting
To increase the life of permanent molds, the surfaces of the mold cavity usually
are coated with a ____________
a) refractory slurry
14
b) silver
c) aluminum
d) zinc
Hollow castings with thin walls can be made by permanent-mold casting using
___________
a) vacuum casting
16
b) slush casting
c) evaporative-pattern casting
d) investment casting
In which of the following casting technique, the molten metal is forced upward by
gas pressure into a graphite or metal mold?
a) vacuum casting
17
b) slush casting
c) pressure casting
d) investment casting
In which of the following casting technique, the metal is heated to just above its
solidus temperature and poured into a vessel to cool it down to the semisolid
state?
19 a) vacuum casting
b) rheo casting
c) pressure casting
d) investment casting
The advantages of semisolid metal forming over die casting are _____________
a) the structures developed are homogeneous, with uniform properties
20 b) casting as well as wrought alloys can be used
c) the lower superheat results in shorter cycle times
d) all of the mentioned