This document provides information about serial interface connections using RS232. It lists the pin assignments and meanings for 25-pin and 9-pin SUB-D connectors. Pin assignments include transmit data, receive data, request to send, clear to send, data set ready, signal ground, data carrier detect, ring indicator, and power supply voltage.
This document provides information about serial interface connections using RS232. It lists the pin assignments and meanings for 25-pin and 9-pin SUB-D connectors. Pin assignments include transmit data, receive data, request to send, clear to send, data set ready, signal ground, data carrier detect, ring indicator, and power supply voltage.
This document provides information about serial interface connections using RS232. It lists the pin assignments and meanings for 25-pin and 9-pin SUB-D connectors. Pin assignments include transmit data, receive data, request to send, clear to send, data set ready, signal ground, data carrier detect, ring indicator, and power supply voltage.
1 NC Not connected (nicht benutzt) 14 NC Not connected 2 TxD (SD) Send data 15 NC Not connected 3 RxD (RD) Receiving data 16 NC Not connected 4 RTS (RS) Sending request 17 NC Not connected 5 CTS (CS) Sending permitted 18 RCLD Receive data with ASR I/F (+) 6 DSR (DR) Data set ready 19 NC Not connected 7 GND (SG) Signal ground 20 DTR (ER) NC ready to operate 8 CD (DCD) Signal quality detection 21 NC Not connected 9 TCLR Send data with ASR I/F (+) 22 RING Calling 10 NC Not connected 23 NC Not connected 11 TCLD Send data with ASR I/F (-) 24 NC Not connected 12 NC Not connected 25 +24V Psuppl. Voltage for FANUC device 13 NC Not connected RCLR Receive data with ASR I/F (-)