Professional Documents
Culture Documents
Instructions Comos at VP
Instructions Comos at VP
1.) „C&I devices are always placed at the Location structure, except of field
devices.”
2.) “H&P devices are always placed at the Plant structure and are only
assigned to the Location structure. “
3.) „HW signals are always placed underneath a device request at the Plant
structure. “
4.) „The source is on the cabinet side, the target is on the field side, ergo from
inside to outside.”
6.) „Hand valves are placed inside a Pipe group; if it is controlled then the
hand valves are moved to an electrical loop.”
7.) „Even if a motor drives a mechanical element, the motor is not placed with
the mechanical equipment underneath the mechanical loop; but with the
control of the motor underneath the electrical loop.”
8.) “The Plant identification code follows a definition which never changes.
The definition is written down at the Norm VN1900.”
11.) „Own Plant and Location codes must be avoided. The codes must be
created through the “Context Menus”.”