‘QW - 483 PROCEDURE QUALIFICATION RECORDS (PQR)
(Record Actual Variables Used to Weld Test Coupon)
Company Name: M/s SANTI FIBRE INDUSTRIES (INDIA)
Procedure Qualification Record No: SF/PQR/GMAW-0001 (Org date 04/12/2022) Revision: 01 Date:
4/08/2023
WPS No. SFIWPS/01 (org date 05/12/2022) Revision: 01 Date: 4/05/2023
Welding Process (es) GMAW
Typesis) (Automatic, Manual machine or Semi Auto): Manual, Horzontal position
JOINTS (QW-402)
See Page No. 3 of 3 |
Fillet weld Joint Test Coupon
(For combination qualifications, the deposited weld metal thickness shall be recorded for each filler metal or process used)
|] BASE METALS (QW-403)_ | POSTWELD HEAT TREATMENT (QW-407)
h IS 513 CR2 (Part 1 2016) Temperature NA E |
7 ade UNS Number. A SSSSS™S~*dCTmgs NA -
‘Group Not = Other NA = =
st Coupon 1S mim TT
Test Coupon (OD) NA |
num Pass Thickness. = 3mm : 7 :
Orner NIL GAS (QW-408)
ercent Composition |
Gas(es) | (Muture) | Flow Rate
“FILLER METALS (QW-404):
_SFA Specification
‘Shielding
“railing
Current OC
Polarity: DCEP (Reverse Polarity)
‘Amps. 70-220 Amps. Volis 18
Tungsten Electrode type & size. _N/ |
Mode of Metal Transfer for GMAW. Shor Grea |
| Other NA a |
x
|] “Flux Type
“Flux Trade Name: 5
Weld metal Thickness
[TECHNIQUE (awa)
Tra BL
ositon of GroovelF it iF Filet horizontal position
trodes’ SINGLE ELECTRODE _
Travel Speed- (Range) 60-1
Weld Progression (Uphill/ Downhill Fat String or Weave Bead String For Rook Sting for Rost
Temperature: WA TA
Inier pais Temperatur
run nae or susequet runs i
Otner Nit L
——
|
QW-483 (Back)POR No. SFPORIGMAW-0007
Revision: 01 Dat
i 7 ____ Tensile Test (QW-150)
‘Specimen [Width Thickness Ultimate Ultimate | Type of,
No (enm) (mmm) Total Load | Unit Sess | Failure &
—(itPa)__| Location
pele
|] Bow eroken oxiste he wor
Toughness Tests (QWA7O NA
Specimen | Notch —] Specimen | Test Impact Valves Drop weight
No. Location | Size (mm) | Temp. % Shear | Mils (in) Break(Y/N)
t
Comments.
DYE PENETRATION TEST IN FILLET WELD & LAP WELD JOINT (QW-180): N.A.
Result - Satisfactory. Penetration into Parent Metal: NA
‘visual Tests - Acceptable
OTHER TESTS:
Type of Test MACRO TEST (Report No - TIMET-0054/23-24, ot-24/04/2023)
Witnessed by Mr. Chandan Majumder (SGS)
Welder's Name: Gopal Porel
Tests Conducted by : R Basu
Laboratory Test No: TC759723000001170F
Result SATISFACTORY
We certify that the statements in this record are correct and that the test welds were prepared. welded and
tested in accordance with the requirements of Section IX of ASME Boller and Pressure Vessel Code.
re
ALN
de ere
Date: 23/02/2023
Date 03.05.2023,{= Thickness of Plate = 5 mm
a) Groove Angle = 90° + 5°
t) Plate Thickness = 1.5 mm
[SANTI FIBRE INDUSTRIES, KOLKATA, Inspection Authority
Mr. Chandan Majumdar (SGS INDIA PVT. LTD.)
Page 3 of |