Professional Documents
Culture Documents
GMK4115L Product Guide Imperial
GMK4115L Product Guide Imperial
Product Guide
Features
• 100 t (115 USt) capacity
• MEGATRAK™ independent
hydro-pneumatic suspension
Features
MEGATRAK™
The MEGATRAK™ suspension system is the best
off road driveline available on the market today.
The system’s versatility and performance allows the
GMK4115L to operate as a true all-terrain crane.
The MEGATRAK™ independent suspension and
all-wheel steer system allows wheels to remain
on the ground at all times so stresses and weight
are not continually transferred between axles.
MEGATRAK™ provides true ground clearance where
others just raise the chassis.
Other benefits of the MEGATRAK™ system are:
• A reliable suspension system
• Excellent job site maneuverability with all-wheel
steering
• Commonality among almost all models
• A driveline that remains aligned at all times
EKS 5 Light
• A steering linkage system that is protected against
Monitoring the lifting
damage
condition of the crane
• Constant tire contact for equal tire wear
at all times EKS works
• Reduced maintenance
together with, but
independently of the
ECOS as a complete
command and control
system or separately as a
load moment indicator.
TWIN-LOCK™
Boom pinning mechanism automatically pins the
sections in position using two horizontal pins.
ECOS
Electronic Crane Operating
System - ECOS enables control
of the entire crane's principle
operations. Simple programming
eases lift planning and a supply of
essential information allows full
concentration on the lift itself.
Contents
Specifications 4
Dimensions 7
Weight proposals 8
Counterweight dimensions 9
Superstructure
Cab
Carrier continued
Electrical system
Dimensions
13 615 mm (44.7')
11 880 mm (39.0')
4035 mm (13.2')
A
D
F E
460 mm
2290 mm 1232 mm 1650 mm 2450 mm 1650 mm 1350 mm
1955 mm (1.5')
(7.5') (4.0') (5.4') (8.0') (5.4') (4.4')
(6.4')
10 750 mm (35.3')
13 040 mm (42.8')
8320 mm (27.3')
R 40.
25
Ra
(25.3') m
(28.0 m
0
bin
00 m
0m
m
10 35.
Ca ')
R 1 (34.
m
8
(
75 ' )
0 4 4')
R 852
Ra (29
jib
m
7
Ra 77
m
80
ng
90 .7')
ffi
mm
50
6000 mm (19.7')
Lu
m
m
4000 mm (13.1')
7000 mm (23.0')
5000 mm (16.4')
om
2750 m
B
(9.0')
Bo
R1
1
(38 700
Ra .4' ) mm
10
3
(34 75 m
498 mm
(16 0 mm
.0') m
(1.6 ft)
.3') m
)
.6'
0m
07
R5
376
(12
Ra
A A
*130 mm
B C D E F
(0.4')
Grove GMK4115L 7
Weight proposals
13 476 mm (44.2')
11 880 mm (39.0')
3890 mm (12.8')
769.5 mm
(2.5')
8500 mm (27.9')
2815 mm9 (.2')
685 mm
(2.2')
1372 mm
(4.5')
Basic Weights - kg (lb) Axles 1 and 2 Axles 3 and 4 2 Dolly axles Total
Mercedes-Benz power Tier IVi, 16.00 tires, 8x6x8 drive/steer, outrigger
pads stowed, auxiliary hoist, 56 ft hydraulic luffing swingaway
stowed, additional oil cooler, 3500 kg (7716 lb) counterweight slab 17 993 (39,666) 18 044 (39,779) 14 984 (33,034) 51 020 (112,478)
bolted to superstructure and 2590 kg (5710 lb) boom dolly, 16 USt of
extend boom boost with boom telescoped 9.8 ft.
Additions:
14.00R25 tires -240 (-529) -240 (-529) — — -480 (1058)
20.5R25 tires 168 (370) 168 (370) — — 336 (741)
8x8x8 drive/steer 261 (575) 69 (152) — — 330 (728)
Removals:
Hydraulic hose reel 15 (33) 5 (11) -189 (-417) -170 (-375)
Brackets for swingaway -17 (-37) -5 (-11) -63 (-139) -85 (-187)
10 m – 17 m (33 ft – 56 ft) swingaway -177 (-390) -55 (-121) -1098 (-2421) -1330 (-2932)
Front and rear outrigger floats -59 (-130) -61 (-134) — — -120 (-265)
8
Counterweight dimensions
In place of counterweight
or
auxiliary hoist 1
Bolted 2
Stackable 3
1108 mm
(3.6')
Stackable 4
Baseplate 5
2730 mm
(9.0')
1602 mm
(5.3')
1 2 3 4 5
600 3500 2200 4400 2200
(1300) (7700) (4850) (9700) (4850)
Counterweight
configuration kg
(lb)
4100 (9000) X X
6300 (13,800) X X X
8500 (18,700) X X X X
10 700 (23,500) X X X X
12 900 (28,400) X X X X X
15 100 (33,200) X X 2X X
17 300 (38,100) X X X 2X X
19 500 (42,900) X X 2X 2X X
21 700 (47,800) X X X 3X X
23 900 (52,600) X X 2X 3X X
26 100 (57,500) X X 3X 3X X
Grove GMK4115L 9
Working range
Main boom
196.9'
200 18.6
18.6
15.2
180
172.0'
26.8
10.2
26.8
23.2
160 6.6
15.8
145.3'
41.6
39.0
140 11.8
3.8
23.6
Height from the ground in feet
8.4
117.6'
15.0
120 69.0
2.2 55.0
34.4
11.4
5.4
92.7'
100 24.2
102.0
68.0
19.0
9.2 42.2
80
66.0'
13.8 30.0
3.8 136.0
7.6
81.0
60 12.6 53.0
21.0
38.2'
230.0*
40 38.0
82.0
20
°
82
0
160 140 120 100 80 60 40 20 0
Operating radius in feet from axis of rotation
Hook heights shown in the working range diagram do not consider loaded boom deflection.
Hook block H
70 USt, 5 sheave 3000 mm (9.8 ft)
40 USt, 3 sheave 2900 mm (9.5 ft)
20 USt, 1 sheave 2800 mm (9.2 ft)
8 USt, single line headache ball 2350 mm (7.7 ft)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
10 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts
Main boom
Feet 38.2 52.2 66.0 79.6 92.7 105.4 117.6 131.5 145.3 158.9 172.0 184.7 196.9
8.0 *230.0 – – – – – – – – – – – –
10.0 160.0 146.0 136.0 130.0 – – – – – – – – –
15.0 124.0 121.0 114.0 108.0 102.0 – – – – – – – –
20.0 99.0 100.0 95.0 93.0 87.0 84.0 69.0 53.0 – – – – –
25.0 82.0 84.0 81.0 79.0 77.0 74.0 69.0 53.0 41.6 – – – –
30.0 – 71.0 71.0 69.0 68.0 65.0 64.0 52.0 41.6 33.2 26.8 – –
35.0 – 61.0 62.0 60.0 59.0 55.0 55.0 48.0 41.2 33.2 26.8 22.0 –
40.0 – 52.0 53.0 50.0 49.0 48.0 46.0 43.4 39.0 33.0 26.8 22.0 18.6
45.0 – – 43.8 43.2 42.2 42.6 39.8 37.2 35.8 32.6 26.8 22.0 18.6
50.0 – – 38.0 38.4 36.4 37.0 34.4 32.2 31.0 30.4 26.6 22.0 18.6
55.0 – – – 33.0 32.8 32.6 30.2 30.2 27.0 26.6 25.6 22.0 18.6
60.0 – – – 28.8 30.0 28.8 26.6 27.2 23.6 23.4 23.2 21.8 18.6
65.0 – – – 25.2 26.6 25.6 24.2 24.2 20.8 20.6 20.6 20.8 18.6
70.0 – – – – 23.6 22.8 23.0 21.6 18.4 18.4 18.2 18.6 18.2
75.0 – – – – 21.0 20.2 21.4 19.4 16.4 17.2 16.8 17.2 17.0
80.0 – – – – – 18.6 19.0 17.6 15.0 16.2 15.8 16.2 15.2
85.0 – – – – – 17.8 17.0 15.8 13.8 15.4 14.6 15.0 13.8
90.0 – – – – – 16.2 15.4 14.2 12.8 14.6 13.4 13.6 12.4
95.0 – – – – – – 13.8 12.6 12.0 13.4 12.6 12.4 11.2
100.0 – – – – – – 12.6 11.2 11.4 12.2 11.8 11.2 10.2
105.0 – – – – – – – 10.0 10.8 11.0 11.0 10.2 9.2
110.0 – – – – – – – 9.2 10.2 10.0 10.0 9.4 8.2
115.0 – – – – – – – 8.0 9.8 9.2 9.2 8.4 7.4
120.0 – – – – – – – – 9.2 8.8 8.4 7.6 6.6
125.0 – – – – – – – – 8.4 8.2 7.4 6.8 5.8
130.0 – – – – – – – – 7.6 7.4 6.8 6.0 5.2
135.0 – – – – – – – – – 6.6 6.0 5.4 4.4
140.0 – – – – – – – – – 6.0 5.4 4.6 3.8
145.0 – – – – – – – – – – 4.8 4.2 3.2
150.0 – – – – – – – – – – 4.2 3.6 2.6
155.0 – – – – – – – – – – 3.8 3.0 2.2
160.0 – – – – – – – – – – – 2.6 –
165.0 – – – – – – – – – – – 2.2 –
*over rear with special equipment
Feet 38.2 52.2 66.0 79.6 92.7 105.4 117.6 131.5 145.3 158.9 172.0 184.7 196.9
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GMK4115L The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 11
Load charts
Main boom
Feet 38.2 52.2 66.0 79.6 92.7 105.4 117.6 131.5 145.3 158.9 172.0 184.7 196.9
Feet 38.2 52.2 66.0 79.6 92.7 105.4 117.6 131.5 145.3 158.9 172.0 184.7 196.9
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
12 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts
Main boom
Feet 38.2 52.2 66.0 79.6 92.7 105.4 117.6 131.5 145.3 158.9 172.0 184.7 196.9
Feet 38.2 52.2 66.0 79.6 92.7 105.4 117.6 131.5 145.3 158.9 172.0 184.7 196.9
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GMK4115L The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 13
Working range
Swingaway and extensions
197 ft main boom with hydraulic luffing 33 ft and 56 ft swingaway and 1x16 ft insert
280
+ 72.0'
4.6
4.6
+ 56.0'
260
4.6 6.8
6.8 0°
4.6 20°
6.8
240 40°
4.6
+ 33.0'
6.8
9.8
4.2 6.0 9.8
220 9.8
4.4
9.0 197.0'
1.8
200 6.2
2.4
1.6
3.6
180
Height from the ground in feet
1.6
160
140
120
100
80
60
40
20
°
82
0
180 160 140 120 100 80 60 40 20 0
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
14 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts
Hydraulic offsettable swingaway
Intermediate angle
30 – – – – – – – – –
35 9.8 – – – – – – – –
40 9.8 – – 6.8 – – – – –
45 9.8 – – 6.8 – – 4.6 – –
50 9.8 – – 6.8 – – 4.6 – –
55 9.8 9.2 – 6.8 – – 4.6 – –
60 9.8 9.2 8.8 6.8 – – 4.6 – –
65 9.8 9.2 8.8 6.8 – – 4.6 – –
70 9.8 9.2 8.8 6.8 6.2 – 4.6 – –
75 9.8 9.2 8.8 6.8 6.2 – 4.6 4.6 –
80 9.8 9.2 8.8 6.8 6.2 5.4 4.6 4.6 4.6
85 9.8 9.2 8.8 6.8 6.2 5.4 4.6 4.6 4.6
90 9.8 9.2 8.8 6.8 6.2 5.4 4.6 4.6 4.6
95 9.8 9.2 8.8 6.8 6.2 5.4 4.6 4.6 4.6
100 9.0 9.0 8.8 6.8 6.2 5.4 4.6 4.6 4.6
105 8.0 8.0 8.8 6.8 6.2 5.4 4.6 4.6 4.6
110 7.2 7.2 7.8 6.8 6.2 5.4 4.6 4.6 4.6
115 6.4 6.4 7.0 6.6 6.2 5.4 4.6 4.6 4.6
120 5.6 5.6 6.2 6.0 6.0 5.4 4.6 4.6 4.6
125 5.0 5.0 5.6 5.2 5.2 5.4 4.6 4.6 4.6
130 4.4 4.4 4.8 4.6 4.6 5.4 4.4 4.4 4.6
135 3.8 3.8 4.2 4.0 4.0 5.0 3.8 3.8 4.6
140 3.2 3.2 3.6 3.6 3.6 4.4 3.2 3.2 4.2
145 2.6 2.6 3.2 3.0 3.0 4.0 2.8 2.8 3.6
150 2.2 2.2 2.6 2.6 2.6 3.4 2.2 2.2 3.2
155 1.6 1.6 2.0 2.2 2.2 3.0 1.8 1.8 2.6
160 – – 1.6 1.8 1.8 2.4 – – 2.2
165 – – – – – 2.0 – – 1.8
170 – – – – – 1.6 – – –
50 – – – – – –
55 8.8 – – – – –
60 8.8 8.4 – – – –
65 8.8 8.4 – – – –
70 8.8 8.4 6.0 – – –
75 8.8 8.4 6.0 – 4.4 –
80 8.8 8.4 6.0 5.2 4.4 4.4
85 8.8 8.4 6.0 5.2 4.4 4.4
90 8.8 8.4 6.0 5.2 4.4 4.4
95 8.8 8.4 6.0 5.2 4.4 4.4
100 8.8 8.4 6.0 5.2 4.4 4.4
105 8.0 8.4 6.0 5.2 4.4 4.4
110 7.2 7.8 6.0 5.2 4.4 4.4
115 6.4 7.0 6.0 5.2 4.4 4.4
120 5.6 6.2 6.0 5.2 4.4 4.4
125 5.0 5.6 5.2 5.2 4.4 4.4
130 4.4 4.8 4.6 5.2 4.4 4.4
135 3.8 4.2 4.0 5.0 3.8 4.4
140 3.2 3.6 3.6 4.4 3.2 4.2
145 2.6 3.2 3.0 4.0 2.8 3.6
150 2.2 2.6 2.6 3.4 2.2 3.2
155 1.6 2.0 2.2 3.0 1.8 2.6
160 – 1.6 1.8 2.4 – 2.2
165 – – – 2.0 – 1.8
170 – – – 1.6 – –
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GMK4115L The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 15
Load charts
Hydraulic offsettable swingaway
Intermediate angle
Radius
Pounds x 1000
Boom Extension
30 – – – – – – – – –
35 9.8 – – – – – – – –
40 9.8 – – 6.8 – – – – –
45 9.8 – – 6.8 – – 4.6 – –
50 9.8 – – 6.8 – – 4.6 – –
55 9.8 9.2 – 6.8 – – 4.6 – –
60 9.8 9.2 8.8 6.8 – – 4.6 – –
65 9.8 9.2 8.8 6.8 – – 4.6 – –
70 9.8 9.2 8.8 6.8 6.2 – 4.6 – –
75 9.8 9.2 8.8 6.8 6.2 – 4.6 4.6 –
80 9.8 9.2 8.8 6.8 6.2 5.4 4.6 4.6 4.6
85 9.8 9.2 8.8 6.8 6.2 5.4 4.6 4.6 4.6
90 9.8 9.2 8.8 6.8 6.2 5.4 4.6 4.6 4.6
95 9.0 9.0 8.8 6.8 6.2 5.4 4.6 4.6 4.6
100 8.0 8.0 8.8 6.8 6.2 5.4 4.6 4.6 4.6
105 7.2 7.2 8.0 6.8 6.2 5.4 4.6 4.6 4.6
110 6.4 6.4 7.0 6.6 6.2 5.4 4.6 4.6 4.6
115 5.6 5.6 6.2 5.8 5.8 5.4 4.6 4.6 4.6
120 4.8 4.8 5.4 5.2 5.2 5.4 4.6 4.6 4.6
125 4.2 4.2 4.8 4.6 4.6 5.4 4.2 4.2 4.6
130 3.6 3.6 4.2 4.0 4.0 5.0 3.6 3.6 4.6
135 3.0 3.0 3.6 3.4 3.4 4.4 3.0 3.0 4.2
140 2.4 2.4 3.0 2.8 2.8 3.8 2.6 2.6 3.6
145 2.0 2.0 2.4 2.4 2.4 3.2 2.0 2.0 3.0
150 – – 2.0 2.0 2.0 2.8 1.6 1.6 2.6
155 – – – 1.4 1.4 2.2 – – 2.0
160 – – – – – 1.8 – – 1.6
50 – – – – – –
55 8.8 – – – – –
60 8.8 8.4 – – – –
65 8.8 8.4 – – – –
70 8.8 8.4 6.0 – – –
75 8.8 8.4 6.0 – 4.4 –
80 8.8 8.4 6.0 5.2 4.4 4.4
85 8.8 8.4 6.0 5.2 4.4 4.4
90 8.8 8.4 6.0 5.2 4.4 4.4
95 8.8 8.4 6.0 5.2 4.4 4.4
100 8.0 8.4 6.0 5.2 4.4 4.4
105 7.2 8.0 6.0 5.2 4.4 4.4
110 6.4 7.0 6.0 5.2 4.4 4.4
115 5.6 6.2 5.8 5.2 4.4 4.4
120 4.8 5.4 5.2 5.2 4.4 4.4
125 4.2 4.8 4.6 5.2 4.2 4.4
130 3.6 4.2 4.0 5.0 3.6 4.4
135 3.0 3.6 3.4 4.4 3.0 4.2
140 2.4 3.0 2.8 3.8 2.6 3.6
145 2.0 2.4 2.4 3.2 2.0 3.0
150 – 2.0 2.0 2.8 1.6 2.6
155 – – 1.4 2.2 – 2.0
160 – – – 1.8 – 1.6
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
16 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts
Manual offsettable swingaway
Fixed angle
30 – – – – – – – – –
35 9.8 – – – – – – – –
40 9.8 – – 6.8 – – – – –
45 9.8 – – 6.8 – – 4.6 – –
50 9.8 9.8 6.8 – – 4.6 – –
55 9.8 9.8 8.8 6.8 – – 4.6 – –
60 9.8 9.8 8.8 6.8 6.8 – 4.6 4.6 –
65 9.8 9.8 8.8 6.8 6.8 – 4.6 4.6 –
70 9.8 9.8 8.8 6.8 6.8 – 4.6 4.6 –
75 9.8 9.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
80 9.8 9.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
85 9.8 9.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
90 9.8 9.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
95 9.8 9.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
100 9.0 9.6 8.8 6.8 6.8 5.4 4.6 4.6 4.6
105 8.0 8.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
110 7.2 7.8 8.4 6.8 6.8 5.4 4.6 4.6 4.6
115 6.4 7.0 7.6 6.6 6.8 5.4 4.6 4.6 4.6
120 5.6 6.2 6.8 6.0 6.6 5.4 4.6 4.6 4.6
125 5.0 5.6 6.0 5.2 6.4 5.4 4.6 4.6 4.6
130 4.4 4.8 5.2 4.6 5.8 5.4 4.4 4.6 4.6
135 3.8 4.2 4.6 4.0 5.0 5.4 3.8 4.6 4.6
140 3.2 3.6 4.0 3.6 4.4 5.2 3.2 4.2 4.6
145 2.6 3.2 3.4 3.0 4.0 4.6 2.8 3.6 4.4
150 2.2 2.6 2.8 2.6 3.4 4.0 2.2 3.2 3.8
155 1.6 2.0 2.2 2.2 3.0 3.4 1.8 2.6 3.2
160 – 1.6 1.8 1.8 2.4 3.0 – 2.2 2.8
165 – – – – 2.0 2.4 – 1.8 2.2
170 – – – – 1.6 2.0 – – 1.8
175 – – – – – 1.6 – – –
Fixed angle
30 – – – – – – – – –
35 9.8 – – – – – – – –
40 9.8 – – 6.8 – – – – –
45 9.8 – – 6.8 – – 4.6 – –
50 9.8 9.8 – 6.8 – – 4.6 – –
55 9.8 9.8 8.8 6.8 – – 4.6 – –
60 9.8 9.8 8.8 6.8 6.8 – 4.6 4.6 –
65 9.8 9.8 8.8 6.8 6.8 – 4.6 4.6 –
70 9.8 9.8 8.8 6.8 6.8 – 4.6 4.6 –
75 9.8 9.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
80 9.8 9.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
85 9.8 9.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
90 9.8 9.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
95 9.0 9.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
100 8.0 8.8 8.8 6.8 6.8 5.4 4.6 4.6 4.6
105 7.2 8.0 8.6 6.8 6.8 5.4 4.6 4.6 4.6
110 6.4 7.0 7.6 6.6 6.8 5.4 4.6 4.6 4.6
115 5.6 6.2 6.8 5.8 6.8 5.4 4.6 4.6 4.6
120 4.8 5.4 6.0 5.2 6.4 5.4 4.6 4.6 4.6
125 4.2 4.8 5.2 4.6 5.6 5.4 4.2 4.6 4.6
130 3.6 4.2 4.4 4.0 5.0 5.4 3.6 4.6 4.6
135 3.0 3.6 3.8 3.4 4.4 5.2 3.0 4.2 4.6
140 2.4 3.0 3.2 2.8 3.8 4.4 2.6 3.6 4.4
145 2.0 2.4 2.8 2.4 3.2 3.8 2.0 3.0 3.8
150 – 2.0 2.2 2.0 2.8 3.4 1.6 2.6 3.2
155 – – 1.6 1.4 2.2 2.8 – 2.0 2.6
160 – – – – 1.8 2.4 – 1.6 2.2
165 – – – – – 1.8 – – 1.6
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GMK4115L The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 17
Working range
Integrated heavy duty jib
220
11.0
196.9'
200 12.6
12.6
17.6
180
172.0'
9.2 20.0
20.0
5.6
160 14.0
27.4
145.3'
32.8
Height from the ground in feet
3.0 10.2
23.0
140
1.8 7.4 13.8
41.0
117.6'
46.0
120 33.6
8.8
4.4 23.0
73.0
91.4'
100
58.0
16.2
6.6 36.0
80 11.2 73.0
64.9'
2.4 24.4 71.0
52.0
60
5.4 16.4
7.6 73.0 38.2'
32.4
40 14.6 55.0
42.6
20
°
82
24.2
0
160 140 120 100 80 60 40 20 0
Hook heights shown in the working range diagram do not consider loaded boom deflection.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
18 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts
Integrated heavy duty jib
Intermediate angle
Radius
Pounds x 1000
Boom Extension
Feet 38.2 + 10.8 64.9 + 10.8 91.4 + 10.8 117.6 + 10.8 145.3 + 10.8 172.0 + 10.8 196.9 + 10.8
0° <20° <40° 0° <20° <40° 0° <20° <40° 0° <20° <40° 0° <20° <40° 0° <20° <40° 0° <20° <40°
Radius
Pounds x 1000
Boom Extension
Feet 38.2 + 10.8 64.9 + 10.8 91.4 + 10.8 117.6 + 10.8 145.3 + 10.8 172.0 + 10.8 196.9 + 10.8
0° - 20° 20 - 40° 0° - 20° 20 - 40° 0° - 20° 20 - 40° 0° - 20° 20 - 40° 0° - 20° 20 - 40° 0° - 20° 20 - 40° 0° - 20° 20 - 40°
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GMK4115L The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 19
Load charts
Integrated heavy duty jib
Intermediate angle
Feet 38.2 + 10.8 64.9 + 10.8 91.4 + 10.8 117.6 + 10.8 145.3 + 10.8 172.0 + 10.8 196.9 + 10.8
0° <20° <40° 0° <20° <40° 0° <20° <40° 0° <20° <40° 0° <20° <40° 0° <20° <40° 0° <20° <40°
Radius
Pounds x 1000
Boom Extension
Feet 38.2 + 10.8 64.9 + 10.8 91.4 + 10.8 117.6 + 10.8 145.3 + 10.8 172.0 + 10.8 196.9 + 10.8
0° - 20° 20 - 40° 0° - 20° 20 - 40° 0° - 20° 20 - 40° 0° - 20° 20 - 40° 0° - 20° 20 - 40° 0° - 20° 20 - 40° 0° - 20° 20 - 40°
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
20 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Notes
Grove GMK4115L 21
Notes
22
Symbols glossary
Transmission
Grove GMK4115L 23
Manitowoc Cranes
Regional headquarters
Americas Europe, Middle East, Africa China Greater Asia-Pacific
Manitowoc, Wisconsin, USA Ecully, France Shanghai, China Singapore
Tel: +1 920 684 6621 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066 Tel: +65 6264 1188
Fax: +1 920 683 6277 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955 Fax: +65 6862 4040
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062
Regional offices
Americas
Brazil
China
Beijing
Factories This document is non-contractual. Constant improvement and engineering progress
make it necessary that we reserve the right to make specification, equipment, and
Brazil price changes without notice. Illustrations shown may include optional equipment
Alphaville Chengdu and accessories and may not include all standard equipment.
Passo Fundo
Mexico Guangzhou
China
Monterrey Xian
TaiAn
Chile
Zhangjiagang
Santiago Greater Asia-Pacific
France
Australia
Charlieu
Europe, Middle East, Brisbane
Moulins
Africa Melbourne
Germany
Czech Republic Sydney
Wilhelmshaven
Netvorice India
India
France Chennai
Pune
Baudemont Delhi
Italy
Cergy Hyderabad
Niella Tanaro
Decines Pune
Portugal
Germany Korea
Baltar
Langenfeld Seoul
Fânzeres
Hungary Philippines
Slovakia
Budapest Makati City
Saris
Italy Singapore
USA
Lainate
Manitowoc
Netherlands
Port Washington
Breda
Shady Grove
Poland
Warsaw
Portugal
Baltar
Russia
Moscow
South Africa
Johannesburg
U.A.E.
Dubai
U.K.
Buckingham
©2012 Manitowoc
Form No. GMK4115L PG
Part No. 08-014 /2M / 0612 PDF www.manitowoc.com