Professional Documents
Culture Documents
2 TDS Bostik Cerabest Profi
2 TDS Bostik Cerabest Profi
KEY FEATURES
- C2TES1 class
- Resistant to water and humidity
- Durable
- Plastic consistency, easy to apply
- Does not slip vertically
- Long working time
- Flexible
- High strength
- Grey & white color
PRODUCT DESSCRIPTION
Technical data determined at +20°C air temperature and 50% relative humidity according
to the standard in effect.
Foreign substances that prevent adhesion such as dust, dirt, form The following publication is available on request: Material Safety
oil, scoria, paint and other residues and wastes such as cement, Data Sheets (MSDS)
plaster and concrete should be removed from the surface of
application. The sub-surfaces that are not strong enough to bear The information given and recommendations made herein are based on
their own weight e.g. cracked plasters, weak surfaces, or residues Bostik’s research only and are not guaranteed to be accurate. The
of moss should be cleaned from the application surface. performance of the product, its shelf life, and application characteristics will
The floors that require repairing should be treated and levelled with depend on many variables, including the kind of materials to which the
self-levelling screeds minimum 3-4 days before adhesive product will be applied, the environment in which the product is stored or
application. Using primer is recommended on anhydrous and applied, and the equipment used for application. Any change in any of these
highly absorptive surfaces such as aerated and exposed concrete. variables can affect the product’s performance. It is the buyer’s obligation,
prior to using the product, to test the suitability of the product for an intended
APPLICATION use under the conditions that will exist at the time of the intended use. Bostik
does not warrant the product’s suitability for any particular application. The
Bostik CeraBest Profi Ceramic Adhesive should be mixed in low product is sold pursuant to Bostik’s Terms and Conditions of Sale that
cycle after pouring into a container filled with clean water at normal accompanies the product at the time of sale. Nothing contained herein shall
environment temperature until a smooth mixture is obtained. be construed to imply the nonexistence of any relevant patents or to
Mixing time should be minimum 5 minutes. The obtained mortar constitute permission, inducement, or recommendation to practice any
should rest for 3 minutes and mixed again for 2 minutes until it invention covered by any patent, without authority from the owner of the
becomes homogenous. patent.
The prepared mortar is spread on the surface with a toothed comb
having suitable tooth size.
Finishing materials (ceramic, tiles, etc) should be adhered on the SMART HELP
combed mortar within working time. If this period of time is
exceeded, the mortar should be scraped off from the plates and
fresh mortar should be spread. Please contact your local representative
The finishing materials should be adhered and fitted well with a
rubber beater by controlling the flatness of the
surface. For joint filler application, minimum after 24 hours from tile
adhesive application.
SUBSEQUENT WORK
COVERAGE
PACKAGING
STORAGE
Dry mortar bags should be protected from water, frost and adverse
air conditions. They should be kept dry and cool on wooden pallets
at between +10°C and +25°C in moisture free conditions. The torn
and opened products should be closed immediately and consumed
first. Maximum 8 bags should be stocked on each other.
Shelf life is maximum 12 months conditional to complying with the
abovementioned storage conditions.