Professional Documents
Culture Documents
Sep ED
Sep ED
ED Serisi
Tüplü Dalgýç Drenaj Pompalarý
ED Series
Submersible Propeller Pumps
Pompanın 20 m' den derinde çalıştırılması halinde Incase the pump is installed 20 mt depth, additional
ilave tedbirler gereklidir. construction features are necessary
- Boyutlarına göre tasarlanmış çelik veya beton tüp içersinde - They operate inside concrete rooms or in steel tubes design
özel olarak hazırlanmış sızdırmazlık yüzeyine kızaklar accoridng to their dimensions. The installation is made by
vasıtasıyla oturtularak çalıştırılırlar. means of slides and the pumps are located on a specially sealed
surface.
- Elektrik motorları IP 68 koruma ve standart olarak F izolasyon
istek üzerine H izolasyon sınıfında da üretilebilirler. - The protection class of the motors is IP 68 and the standart
insulation class is F. On demand H isolation class motors can be
- Motor bölmesi çift mekanik salmastra ile ayrılmıştır. Yağ manufactured.
haznesi içersinde çalışan mekanik salmastra bölmesi ile motor
bölmesi ayrı ayrı elektrot donanımları ile su kaçağına karşı - The motor side of the pumps are seperated from the pump side
izlenebilmektedir. by means of two mechanical seals which operate in oil bath.
Mechanical sela side and the motor side are both controled by
- İsteğe bağlı olarak rulmanlı yatak sıcaklıklarının izlemesi ve seperate water leakage sensor to make the system more
kontrolu ile stator sargı izolasyon kontrolu ve korumaları reliable.
uygulanabilmektedir.
With the ED Series pumps bearing overheating and widing
- Standart olarak 10m H07RN-f enerji + kontrol kablosu ve 5 m overheating sensors can be used optionally whereas different
askı zinciri ile üretilmektedirler. kinds of optional features can be applied.
Kodlama Codes
ED 400 ED 400
Daha fazla bilgi için lütfen firmamıza danışınız / For detailed information, please consult the company.
Performans Tablosu ve Malzeme Seçenekleri
Material Options and Performance Chart ED SERIES
15
Hm (mss)
ED Serisi / Series
10
9
8
7
1
0,05 0,06 0,08 0,1 0,15 0,2 (m3/sn) 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,5 2,0
G-X 6 CrNiMo 18 10 2
Açıklama / Explanation
X 5CrNiMo 18 10
X 2CrNiMo 18 10
G-X 6 CrNi 18 9
G-X 5 CrNi 13 4
G-CuSn 7 ZnPb
G-CuSn 5 ZnPb
GGG-NiCr 20 2
X 2 CrNi 19 11
GJS - 400 - 15
X 5 CrNi 18 9
G-Cu Sn 10
GP240 GH
Standart / Standard
GJL - 250
X 20Cr13
Opsiyonel / Optional
2.1050.01
2.1090.01
2.1096.01
0,6025
0,7040
0,7660
1,0619
1,4308
1,4313
1,4408
1,4021
1,4301
1,4306
1,4401
1,4404
Difüzör / Diffuser
Çark / Impeller
Mil / Shaft