You are on page 1of 4

Republic of the Philippines

Department of Education
Region III
Schools Division of Nueva Ecija
General Luna National High School
General Luna, Llanera, Nueva Ecija
FIRST QUARTER EXAMINATION
COMPUTER SYSTEM SERVICING 8

NAME: ________________________________________ SCORE: ___________


GRADE & SECTION: ____________________ DATE: ___________

Direction: Read and understand the statements or questions below and choose the best answer from the
choices given. USE ONLY CAPITAL LETTERS, small letters are considered wrong.

_____ 1. What is the primary purpose of a hand tool in the context of computers?
A. Enhancing keyboard input
B. Executing software commands
C. Performing manual tasks during hardware assembly and maintenance
D. Displaying information on the monitor
_____ 2. What is the purpose of an anti-static wrist strap when working with computer components?
A. It's a fashion accessory
B. It prevents electrostatic discharge
C. It enhances grip on tools
D. It measures resistance in circuits
_____ 3. What tool is used to test the integrity of circuits and the quality of electricity in computer
components?
A. Crimping tool B. Lan tester C. Anti-static wrist strap D. multi-tester
_____ 4. Which hand tool is commonly used to tighten or loosen screws in computer hardware?
A. Pliers C. Hammer
B. Screwdriver D. Wrench
_____ 5. What happened to screw, if you over-tighten them with a screwdriver?
A. not tighten firmly B. stuck C. exposed D. all of the above
_____ 6. What is the primary function of needle-nose pliers in computer assembly?
A. Cutting wires
B. Gripping and holding small objects
C. Turning screws
D. Measuring voltage
_____ 7. Which tool is used to clean different computer components without scratching or leaving debris?
A. Part Retriever B. Cable ties C. Lint-free Cloth D. Flat head screwdriver
_____ 8. What is the primary function of needle-nose pliers in computer assembly?
A. Cutting wires
B. Gripping and holding small objects
C. Turning screws
D. Measuring voltage
_____ 9. It is consider as the primary input device.
A. Mouse B. Touchpad C. Keyboard D. Microphone
_____ 10. If Powerpoint is for making Presentation, what does Excel makes?
A. Document B. Spreadsheet C. Publisher D. Word/sheet
_____11. It provides a displays result and converts information into readable form after the computer has
processed the input data that has been entered in the computer through an input device.
A. Software B. Application Software C. Output Device D. Input Device
_____12. Which of the following is the example of an input device?
A. Speaker B. Smart Board C. Keyboard D. Printer
_____13. Which input device is commonly used for pointing and selecting items on a computer screen?
A. Keyboard C. Scanner
B. Mouse D. Printer
_____14. What is the primary function of the CPU (Central Processing Unit) in a computer system?
A. Storing data
B. Executing instructions
C. Managing network connections
D. Generating graphics
_____15. On the middle of your internet surfing, what will you do if a web browser suddenly stops working?
A. Shutdown your computer to turn off your computer.
B. Connect your printer and power on the switch button.
C. Click the Refresh button of the browser to reload the current page.
D. None of the above.
_____16. Which component of a computer system is responsible for temporarily storing data that the CPU
needs to access quickly?
A. RAM (Random Access Memory) C. CPU Cache
B. Hard Drive D. SSD (Solid State Drive)
_____17. Which safety measure can help prevent overheating in a computer system?
A. Installing more software
B. Placing the computer in direct sunlight
C. Regularly cleaning dust from fans and vents
D. Running multiple applications simultaneously
_____18. It is the smallest unit of information in computer.
A. Bit C. kilobits B. Bytes D. kilobytes
_____19. What is a memory equal to one million bytes and a unit of storage capacity for computer data?
A. Bit B. Gigabytes C. Bytes D. Kilobytes
_____20. What is the purpose of an antivirus program in a computer system?
A. Creating backups
B. Enhancing system performance
C. Protecting against malicious software
D. Managing network connections
_____21. Represented by rectangle and it refers to an action in a business process.
A. Terminator B. Sub-process C. Process D. Decision
_____22. In a flowchart, what does a diamond shape usually indicate?
A. Input C. Decision point
B. Process D. Output
_____23. Which of the following flowchart symbols is used to represent a decision or branching point?
A. Rectangle C. Oval
B. Diamond D. Hexagon
_____24. What is the primary purpose of a flowchart in software development?
A. Generating random numbers
B. Representing the flow of control and data in a process
C. Creating graphical user interfaces
D. Debugging code
_____25. What does the oval symbol typically represent in a flowchart?
A. Decision point C. Process or operation
B. Input or output D. Start or end of the process
_____26. What is the correct sequence of flowchart symbols for a typical process flow?
A. Oval, Diamond, Rectangle, Arrow
B. Rectangle, Arrow, Oval, Diamond
C. Diamond, Rectangle, Arrow, Oval
D. Oval, Rectangle, Diamond, Arrow
_____27. In an electrical circuit diagram, what does a straight line typically represent?
A. Resistor C. Capacitor
B. Wire or conductor D. Inductor
_____29. What does the symbol "LED" stand for in the context of an electronic circuit?
A. Light Emitting Diode C. Linear Electrical Device
B. Low Energy Device D. Lithium Electrolytic Diode
_____30. Which type of circuit allows only one path for the flow of electric current?
A. Parallel circuit C. Combination circuit
B. Series circuit D. Complex circuit
_____31. What type of diagram is commonly used to represent the flow of information or processes within a
system?
A. Venn diagram C. Flowchart
B. Pie chart D. Bar graph
_____32. What is the purpose of a diode in an electronic circuit?
A. Amplifying signals C. Storing electrical energy
B. Controlling current flow in one direction D. Increasing resistance
_____33. What is a potential health hazard associated with prolonged sitting while using a computer?
A. Increased energy levels
B. Reduced risk of musculoskeletal disorders
C. Lifestyle-related issues such as obesity
D. Improved cardiovascular health
_____34. Which of the following is an example of a physical hazard in a computer environment?
A. Password theft C. Software bugs
B. Electrical shock from faulty wiring D. Data corruption
_____35. What is a common ergonomic hazard associated with computer use?
A. Software malfunction C. Network security breach
B. Eye strain and discomfort D. Printer paper jams
_____36. What is the primary use of a multimeter in computer repair?
A. Testing network speed
B. Measuring electrical current, voltage, and resistance
C. Analyzing hard drive performance
D. Detecting malware
_____37. What is the main purpose of a schematic diagram in electronics?
A. To represent physical appearance
B. To show connections and components in a circuit
C. To display numerical data
D. To depict three-dimensional structures
_____38. Which of the following is a characteristic of parallel circuits?
A. Single pathway for current
B. Total resistance increases with more components
C. Voltage across components is unequal
D. Current is the same across all components
_____39. In a parallel circuit, if one branch is broken (open), what happens to the other branches?
A. They become open as well.
B. They continue to function normally.
C. The current in the entire circuit stops.
D. The voltage across all branches increases.
_____40. What is the primary purpose of a schematic diagram in electronics?
A. A visual representation of physical components
B. A detailed blueprint for construction
C. A graphical depiction of voltage levels
D. A symbolic representation of electrical connections and components

II. COMPUTATION. Show your solution.


Convert the following:
TB
41.) 2 Gb to Kb
GB
42.) 110 KB to Mb
MB
43.) 8000 Gb to Tb
KB
44.) 1.35 Mb to Gb
B
45.) 157 Gb to Tb

Convert binary to decimal:


46.) 1 0 1 0 1 0 1 1
47.) 0 1 0 1 0 1 1 0
48.) 0 1 1 0 1 0 1 1
49.) 1 0 1 0 0 0 1 0
50.) 0 1 0 0 1 1 1 0

Convert decimal to binary:


51) 25
52) 100
53) 53
54) 62
55) 80

Prepared by:

ROCHELLE P. DE LEON
Subject Teacher

You might also like