Professional Documents
Culture Documents
PLB Sacs LTR en LR
PLB Sacs LTR en LR
Key Components
Modeling
• Precede Graphical Modeler
• Datagen Intelligent Editor
• Gap Elements
• Superelements
SACS ™
• Liquefaction Offshore Structure Ultimate and interactive graphics 3D post-processor, topsides wind
Offshore Structure Ultimate contains capabilities required loading, Combine, Gap, Tow, and LDF large deflection. The
• Wind Turbine Analysis for typical offshore jackets, wharfs, and dolphin structures. package also includes automatic model generation, beam and
• Dynpac Modal Analysis It includes the interactive graphics modeler with advanced finite element capability, steel code check and redesign, wind
3D capabilities, SACS IV solver and interactive graphics 3D and gravity load generation, inertia and moving load generation,
• Collapse post processor, Seastate, Joint Can, Pile, Combine, Gap, Tow, tension/compression nonlinear elements with initial gap, load
• Collapse Advanced and LDF large deflection. The package also includes automatic case combination, linear large deflection analysis, and full output
model generation, beam and finite element capability, steel report and plotting capabilities.
Design
code check and redesign, environmental load generation,
• Combine Solution Files tubular connection check, single pile/soil interaction, inertia Offshore Structure
• Post Offshore Code Design and moving load generation, tension/compression nonlinear Offshore Structure contains capabilities required for static
elements with initial gap, load case combination, linear structural analysis. It includes the interactive graphics
• Concrete Design
large deflection analysis, and full output report and plotting modeler with advanced 3D capabilities, SACS IV solver
• Postvue Graphical Redesign capabilities. The package also contains the multicore analysis and interactive graphics 3D post-processor, Combine, Gap,
• Joint Can capability allowing the user to conduct multiple analyses of Tow, and LDF large deflection. The package also includes
• Interactive Fatigue the same type in parallel, saving hours of runtime. automatic model generation, beam and finite element
capability, steel code check and redesign, inertia and
• Dynamic Fatigue
Offshore Structure Advanced moving load generation, tension/compression nonlinear
• Wave Fatigue Offshore Structure Advanced contains capabilities required elements with initial gap, load case combination, linear
for typical topside and deck analysis. It includes the interactive large deflection analysis, and full output report and
graphics modeler with advanced 3D capabilities, SACS IV solver plotting capabilities.
SACS
SACS-AutoPIPE Intraoperability
The SACS and AutoPIPE® interface integrates piping design, pipe
stress, and structural analysis. It allows users to automatically
transfer pipe support loads onto the structural model for analysis, and
structural model back to the piping model for visualization, engineering
coordination, and combined stiffness model for more accurate pipe
support loads. Workflows to add pipe loads to offshore structures Parametric study for the fatigue design of a wind turbine
removes the requirement for manual data entry. The interface provides transition piece.
realistically engineered designs, and avoids the manual transfer of Collapse
support loads between the piping and structural models. Plastic Nonlinear Add-on
Perform advanced plastic analysis using of the Offshore Structure,
Offshore Structure Advanced, or Offshore Structure Ultimate package.
Collapse Advanced
Plastic Nonlinear Add-on
Perform advanced nonlinear plastic analysis including pushover,
ship impact, dropped object, and blast analysis.
The Collapse Advanced program supports large deflections, large
rotations, arc length iterations, automatic sub-incrementations and
torsional buckling. It requires the use of Offshore Structure, Offshore
Structure Advanced, or Offshore Structure Ultimate package.
SACS – Combined piping and structural model (secondary steel in green)
Fatigue Advanced – Dynamic Response
Fatigue Package with Dynamic Response
SACS-MOSES Intraoperability
This package contains the modules required to determine the wind
SACS structural models can be imported into MOSES for offshore
fatigue damage of a dynamic system. This package contains DYNPAC,
installation analysis. Generating SACS TOW files from MOSES
Fatigue, Interactive Fatigue, and Dynamic Response. It requires the use
allows automatic generation of inertial based acceleration loading
of the Offshore Structure, Offshore Structure Advanced, or Offshore
and RAOs. Enhancing collaboration across structural and naval
Structure Ultimate package.
architectural teams improves efficiency, reduces rework and project
delays. For an improved 3D hydrodynamic response, users can run
Fatigue Advanced – Wave Response
a MOSES launch analysis directly from SACS Executive using SACS
Fatigue Package with Wave Response
input for a launch analysis.
This package contains the modules required to determine the fatigue
damage of a dynamic system subject to wave loads. This package
contains DYNPAC, Fatigue, Interactive Fatigue, and Wave Response.
It requires the use of the Offshore Structure, Offshore Structure
Advanced, or Offshore Structure Ultimate package.
Fatigue Ultimate
Fatigue Package with Wave Response
and Dynamic Response
This package contains the modules required to perform any dynamic
deterministic, time history, or spectral fatigue analysis. It requires
the use of the Offshore Structure, Offshore Structure Advanced,
or Offshore Structure Ultimate package.
Ship impact analysis.
Wind
The following add-on modules OpenWindPower ™ Fixed Foundation
can be combined with Offshore The OpenWindPower Fixed Foundation is comprised of the
Structure Ultimate for comprehensive following packages: Offshore Structure Ultimate, Pile Structure
offshore capabilities. Design, Collapse, and Fatigue Ultimate. The package also
contains the SACS interfaces to the GH Bladed and FAST wind
Pile Structure Design turbine aero-elastic modules.
Soil/Pile/Structure Interaction Analysis
This nonlinear add-on package permits nonlinear soil/pile/
structure interaction analysis of fixed offshore structures with
multiple fixed supports using the PSI program modules. It requires
the use of the Offshore Structure, Offshore Structure Advanced,
or Offshore Structure Ultimate package. Data interchange with MOSES for FPSO topsides analysis.
SACS
The following software modules extend the • Extensive plotting and reporting capabilities
functionality of any of the three offshore structure • Code check parameter generation including K-factors and
packages and are either included within those compression flange unbraced lengths
packages or available as add-on modules. Please
consult your Bentley representative for product • Allows SACS model files to be converted into 3D SAT file format
specifics relative to your needs. compatible with AutoCAD, and other CAD systems
• Allows the definition of sets comprised of joints, members,
SACS Executive plates, shells, and solid elements
Common Interface to Program Suite
• Allows views to be saved as models
• Controls and connects all elements of the SACS system
• Physical member support capabilities
• Launches all SACS interactive programs
• Professional and other ACIS-enabled CAD packages
• Executes all batch program analyses
• Supports full 3D geometry and section properties
• Allows access to all SACS system configuration settings,
including system file location and security key settings • Allows SACS model files to be ported directly to a PDMS macro
file, which creates the 3D model in PDMS
• Includes command line help and power buttons for the most
commonly executed tasks • Supports PDMS section libraries in addition to creating PDMS
• Specifies analysis options without changing data input file sections for sections defined in the SACS model
SACS has applications for all types of offshore structures and vessels
SACS
• Moving loads generation • API (including 21st edition), AISC, LRFD, Norsok, Eurocode 3,
Canadian, DNV, British Standards, and Danish DS449
• Diameter, Reynolds number, and wake encounter effects code check
dependent drag and inertia coefficients
• Plate panel checks in accordance to DNV-RP-C201
• Weight load cases
• Creates updated model with redesigned elements
• Forces on nonstructural bodies
• Modify code check parameters
• Deterministic and random wave modeling for dynamic response
• Load combination capabilities
• Member hydrodynamic modeling for static and dynamic analysis
• Supports codes from 1977 to present
• Corrosion modeling
• Detailed and summary reports
• Hydrostatic collapse analysis
• Span (multimember effects)
• ISO 19902
• Automatic extrication of SCFs from a finite element
analysis of a meshed joint
Joint Can
Tubular Joint Code Check and Redesign
• Present and past codes including latest API
21st edition, supplement 2, and LRFD, Norsok, DS449,
and Canadian
Graphical user interface for the design and automatic meshing • ISO 19902
of stiffened nontubular joints.
• Connection strength (50 percent) check
SACS IV Solver
• Overlapping joints analyzed
Static Beam and Finite Element Analysis
• Beam elements including tubulars, tees, wide flanges, • Minimum and extreme seismic analysis
channels, angles, cones, plate and box girders, stiffened
cylinders, and boxes Postvue
Interactive Graphics Post Processor
• Solid and plate elements (isotropic and stiffened) • Interactive member and tubular joint code check
• Discrete Kirchoff Theory (DKT) thin-plates and redesign, with the option to print code check
details for latest AISC, ASD and LRFD, API,
• Isoparametric 6-, 8-, and 9-node shell elements ISO 19902 codes
• Library of AISC, U.K., European, German, Chinese, and • Display shear and bending moment diagrams
Japanese cross sections, as well as user-defined libraries
• Display rendered deflected shapes for static
• Member, plate, and shell local and global offsets and dynamic analyses
• Beam and finite element thermal loads • Animate deflected and modal shapes
• Elastic supports defined in global or reference joint • Color plate stress contour plots
coordinate system
• Code check and redesign by individual or group
• Specified support joint displacements of elements
PSI:
• API P-Y / T-Z Soil • User Defined P-Y / T-Z Soil
• API Adhesion Soil • User Defined Adhesion Soil
• Color-coded results and unity check plots • Creates wave spectra from scatter diagram
• Creates updated input model file for re-analysis • Uses Paris equation to predict crack growth rate due to
cyclic stresses
• Labels UC ratio, stresses, and internal forces
on elements • Load path dependent joint classifications
• Includes wave spreading effects
Concrete
Reinforced Concrete Code Check • Reservoir (rain flow) cycle counting method
and Redesign • ISO 19902
• Rectangular, Circular, Tee, and L cross sections
• Beam, bi-axial beam-column, slab, and wall elements supported Interactive Fatigue
Interactive Fatigue Life Evaluation
• Multiple reinforcement patterns can be specified
• Shows the 3D view of the connection and allows braces to be
• Code check per ACI 318-89 (revised 1992) selected with the mouse
• Shear reinforcement check and redesign • Reads connection defaults when joint and/or brace is/are
• Reinforcement development length check selected, thus eliminating the need to calculate and display
SCFs before viewing capacity or modifying properties
• Deflection and creep calculation
• Recognizes all SCF and S-N options available in the batch program
• Second order/P-delta analysis capabilities
• Allows SCF theory to be changed for any type connection, including
Fatigue in-line connections and connections with user defined SCFs
Fatigue Life Evaluation and Redesign
• Reports have been expanded and reworked to make them
• Spectral, time history, and deterministic fatigue analysis
easier to read
• Cyclic stress range calculation procedures include wave search,
• Reports and plots can be displayed on the screen and/or
curve fit, and interpolation
saved to a file
• SCF calculations recommended by API (including 21st edition
• Automatic redesign
supplements), HSE, DNV, DS449, and Norsok Codes
• Automatic redesign GAP
• API (including 21st edition supplements), AWS, HSE, and Nonlinear Analysis with One-way Elements
Norsok thickness dependent recommended S-N curves • Accurate simulation of load out or transportation analysis using
one-way elements
• Multiple run damage accumulation
• Tension or compression gap elements with initial gap
• Pierson-Moskowitz, JONSWAP, Ochi-Hubble double peak,
simplified double peak, and user-defined spectra • General nonlinear elements
• Automated or user-specified connection details • Friction element
SACS
PSI Superelement
Nonlinear Soil, Pile, and Structure Interaction Automated Substructure Creation
• Beam column effects included and Application
• Nonuniform piles • Unlimited number of superelements
• P-Y and T-Z curves, axial adhesion and springs • Up to 1,000 interface joints per superelement
• API P-Y, T-Z, skin friction and adhesion data generated from soil • Translation and rotation of superelements
properties per API • User-defined stiffness matrices
• Full structural analysis and pile code check API, LRFD, Norsok, • Full stress recovery
HSE, DS449, Canadian, and DNV
• Superelements can contain other superelements
• Offset P-Y & T-Z curves for mudslides
• Translation and rotation of superelements
• Full plotting and graphical representation of soil data and results,
including stresses, P-Y, T-Z curves Dynamic Superelement
• Soil liquefaction effects • Can be based upon either Guyan or
Craig-Bampton methods
Pile • Uses Modal Assurance Criterion to check accuracy
Isolated 3D Pile Analysis
• User-defined output format
• Beam column and pile batter effects included
• Uses PSI soil data Combine
• Optional pile head springs Common Solution File Utility
• Combines dynamic and static results from one or multiple
• Specify force at or below pile head
solution files
• Specify pile head displacements
• Combines results from analyses having different member,
• Specified pile head forces or displacements plates, etc.
• Automatic generation of linear equivalent pile stubs for dynamic • Superimposes mode shapes
or static analysis
• “Worst-case” combination of dead loads with
• Soil liquefaction effects earthquake response
• Same plotting and code check features as PSI • Determine extreme wave loads from input spectra
SACS
• General periodic forces decomposed by Fourier analysis • Material list, cost estimate, and weight
control reports
• Ice dynamics analysis
• Weld volume requirements and cost
• Engine/compressor vibration analysis
• Required protective anodes and cost
• Response spectrum output at any joint
• Surface area calculations by elevation
• Equivalent static load and incremental load output
resulting from earthquake, ship impact, dropped object • Anode calculation in accordance to NACE SPO176-2007
and blast analysis. This loading can be used for (formerly RP0176-2003) and DNV-RP-B401
subsequent linear static analysis or for nonlinear
collapse analysis
• Ship impact analysis
• Dropped object analysis
Tow
Transportation Inertia Load Generator
• Input motion for six degrees of freedom
• Output location for selected points
• Automatic weight calculation
• User input member and joint weights
• Generates distributed member and plate loads
• Converts user defined loads into inertias
© 2020 Bentley Systems, Incorporated. Bentley, the Bentley logo, SACS, AutoPIPE, MOSES, Offshore Structure, Offshore Structure Advanced, Offshore Structure Ultimate,
OpenWindPower, OpenWindPower Fixed Foundation, ProSteel, and ProjectWise are either registered or unregistered trademarks or service marks of Bentley Systems,
Incorporated or one of its direct or indirect wholly owned subsidiaries. Other brands and product names are trademarks of their respective owners. 25482 07/20