Professional Documents
Culture Documents
Advantech Adam 4520 Isolated Rs 232 To Rs 422 Rs 485 Converter Adam 4520 D2e Data Sheet
Advantech Adam 4520 Isolated Rs 232 To Rs 422 Rs 485 Converter Adam 4520 D2e Data Sheet
10 bits
(default) ON
1 2
11 bits
ON
1 2
12 bits
ON
1 2
2
4
2
4
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10
2
4
2
1 2 4
3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10
2
4
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10
2
4
2
4
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9
ON
2
4
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 10
ON
2
4
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10
2
4
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10
2
4
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10
RS-422
ON
2
4
1 2 3 4 5 6 7 8 9 10
advise the use of thicker wire to limit the line voltage drop. RS-485 Device RS-485 Device
RS-422 Host
(G) DATA-
RS-422 Slave
(R) +Vs
ADAM Dimensions
-
Power Supply
+10~30 V
+
We advise that the following standard colors (as
Communication Wiring
We recommend that shielded-twisted-pair cables that
comply with the EIA RS-485 standard be used with the
ADAM network to reduce interference. Only one set of
twisted-pair cables is required to transmit both data and
RTS signals. We advise that the following standard colors
(as indicated on the modules) be used for the communica-
tion lines:
GND GND
DATA0 +
RS-422/ RS-422/ DATA1 +
RS-485
RS-485 RS-485 Communication RS-485
DATA0 - DATA DATA DATA1 -
Receiver/ Controller Receiver/
Rx0 + Tx1 +
Driver Driver
Rx0 - Tx1 -
RS-422
RS-422 Rx1 +
Tx0 + GND GND
Tx0 - Rx1 -
Direction
Control
Logic
ADAM-4510S Repeater
Data Format
Baud Rate Setting (SW1)
Setting (SW2)
ON 4.9152 MHz
OSC
GND GND
DATA0 +
RS-422/ RS-422/ DATA1 +
RS-485 RS-485 Communication RS-485 RS-485
DATA0 - DATA
DATA DATA DATA1 -
Receiver/ Controller Receiver/
Rx0 +
Driver Tx1 +
Rx0 -
Driver
Tx1 -
RS-422 RS-422
Tx0 + GND Opto-Coupled Rx1 +
GND
Tx0 - Isolation
Rx1 -
Direction
Control
Logic
+5 V GND
P.S.
TxD
RS-232 RS-422/ DATA1 +
RxD Communication RS-485 RS-485
RTS
Receiver/ DATA DATA DATA1 -
Driver Controller Receiver/
GND Tx1 +
Driver
Tx1 -
OPTO-Coupled RS-422
Rx1 +
Isolation
Rx1 -
Direction
Control
Logic
+5 V GND
P.S.