Professional Documents
Culture Documents
5. Media Sensor
UP Scroll up the menu list
11 DOWN Scroll down the menu list
6. Print head release lever
4 SELECT Enter/ Select cursor located option
7. Media sensor lock 5
8. Media guide bar 6 12 LCD
Display
9. Label roll guard 7
10. Label supply spindle LED Indicators
LED Status Indication Front Panel
11. Ribbon supply spindle Buttons
Off The printer power is turned off
12. Media Dampener POWER
On The printer power is turned on
13. Print head pressure adjustment knobs On The printer is ready
Ribbon
Supply
Ribbon
Sensor
1. Lift open the printer 2. Install the ribbon onto 3. Thread the ribbon 1. Lift open the printer 2. Slide the label roll guard 3. Lift the label roll guard
Media Door. Push the print the ribbon supply spindle. through the ribbon sensor, Media Door. Push the print horizontally to the end of vertically and push forward
head release lever to open and the open space between head release lever to open label spindle. Place the roll until the media fits gently
the print head mechanism. the print head and platen. the print head mechanism. of media on the label supply against the back wall of the
Tape the ribbon onto the spindle. printer.
rewind spindle.
Ribbon Removal
1. Break or cut the ribbon
between the ribbon guide
plate and the ribbon rewind
spindle.
2. Push the ribbon release
button inward to release the
tension on the ribbon.
4. Feed the media’s lead- 5. Adjust the paper guide to 6. Position the media
3. Slide of the ribbon off of ing edge forward over the match the width of the label. sensor eye, indicated by the
4. Turn the rewind spindle 5. Close the print head the ribbon rewind spindle
clockwise 3-5 rotations until mechanism by applying media guide bar, under the downward triangle, until
and discard. media dampener, through the triangle is in the midlle
the ribbon is smooth and downward pressure. The
has tension. printhead release levers will the media sensor placing of the label. Once in place,
‘click’ when locked in place. the label’s leading edge turn the media sensor lock
onto the platen roller. downward to hold it in
place.
4 5
Cub CB-1024i and CB-1034i Cub CB-1024i and CB-1034i
Quick Start Installation Guide Quick Start Installation Guide