Professional Documents
Culture Documents
2GPL113777 D01 Assembly Drawing To Print A SUPPORT D1
2GPL113777 D01 Assembly Drawing To Print A SUPPORT D1
SUPPORT 1HC0069724
720 720
APP.SUPPORT 1HC0069724 APP.SUPPORT 1HC0069724 APP.SUPPORT 1HC0069724
720 720
R7 R5
267
267
R3
R3
R3
BOLT M16*50 BOLT M16*60
NUT M16, WASHER M16 NUT M16, WASHER M16 P102
P102
1350
P116
TOP VIEW
FRONT VIEW
P116
t h i ng t o
EARTHING
Y
-
DETAIL
ol e s for ear
g h
D14 Crealegtionfsupport
38
every
a n i zi n g
d i p g a lv d plate
o t te or en
262
e f o r h
s footpla
BOLT M12*40 g h o l e
NUT M12, WASHER M12
R7 Creaetinmade in th
to b
D14
6255
6255
15
P116
X DETAIL
-
P116
NUT M30 - ISO 4032
SCOPE: civil contractor
SPECIAL WASHER - ABB TYPE 2
SCOPE: civil contractor
60mm
PRE-EMBEDDED ANCHOR
ROD M30 - DIN 976
SCOPE: civil contractor
CONCRETE SLAB
SCOPE: civil contractor
1 GENERAL MANUFACTURING NOTES
1.1 All steel parts have to be hot galvanized according to manufacturing request. 1.7 Dimensions tolerances for non-welded construction according to EN ISO 2768-mK.
Otherwise: 01-TMSS-01 REV 03
1.8 Material quality according to manufacturing request.
- Minimal layer for holes according to manufacturing request. Otherwise: EN 10025, EN 10219
2
Otherwise: 40 μm / 285 g/m
1.9 Material class according to manufacturing request.
- Minimal layer for other parts according to manufacturing request. Otherwise: S275JR
2
Otherwise: 86 μm / 610 g/m
1.10 The additional parts as fasteners, PTFE plates, rollers and etc (items in the bill of
1.2 Hot dip galvanized threads to be brushed prior to assembly. materials) have to be assembled by a supplier.
1.3 Welding to be continuous according to manufacturing request. 1.11 All bolts, nuts, washers and etc (except stainless steel) have to be hot galvanized
P116 Otherwise: EN ISO 3834-1/-2 according to manufacturing notes.
1.4 All welds shall be all around fillet welds unless otherwise noted. Otherwise: 01-TMSS-01 REV 03
60
APP.SUPPORT 1HC0069724
APP.SUPPORT 1HC0069724
R3
P116
APP.SUPPORT 1HC0069724
P116
BOLT M16*50
Ø40...5 - P102
R3
R3
P116
P116
R5
R7
P116