els el aad
Moulded neoprene-in-shear element with locking lip, housed in epoxy powder coated steel frame. Designed for
isolation of noise and high frequency mechanical vibration produced by suspended equipment, pipes, ducts.
Product Features
+ The hollow conical elements are designed so that loading
Of the rubber takes place in shear as well as compression
This permits higher deflection and ensures better isolation
performance than solid rubber elements.
+ Projecting bush of element prevents short-circuting, by i.
eliminating possible contact between frame and lower rod,
+ Exclusive locking-lip feature of bush centralises the
‘element and prevents its dislocation / toppling
+ Stee! load distribution plate embedded at top of element,
+ Hanger cage is designed to accommodate lower
‘suspension rod misalignment over a 30° arc.
—
+ Color coded to facilitate identification of capacity
+ Fully corrosion resistant construction - epoxy powder
coated frame, load plate completely moulded in rubber.
+ Available up to 900kg load-bearing capacity and rated
deflection from 8mm to 13mm, depending on size.
suoeron tact
Typical Applications
WHS series hangers are used in non-critical applications, to
isolate equipment operating at relatively high rotational speed
(generally above 24Hz-1450rpm) or pipes / ducts connected to
such equipment.
Application examples include : Fan Coil Units, small AHUs,
‘ans, first few pipe / duct support points adjacent to equipment
Selection Guidelines T
+ The calculated weight or published point-oad data of
equipment should ideally be increased by a safety factor of w
10 to 15% and the next higher hanger model selected.
+ In calculating the operating equipment weight, please
consider variables such as weight of water, attached pipe L
fittings / valves and air-ducts etc.
Gero ean ane een set
Isolator Color Rated Rated Dimensions (mm)
Model Code Load (kg) | Deflection [7 L Ww H F | a(Max)
WHS-AT Green 18
wris:A2 Red 35 8mm 58 50 n 38 mio
wis-aa Yellow 50
wHs-8t Green 100
was-62 Red 140 | 10mm 7 60 100 48 mz
wHs-63 Yellow 200
WHS-c1 Green 280
wus.c2 Res 350 | 10mm 94 80 145; mB m6
was-c3 Yellow 500
WHs-01 Green 600
was-02 Red 750 | 13mm 107 95 180 %0 M20
wHs-03 Yellow 900
‘Stockist ws 30500| Ry
a
MeoRY 180 9001:2000