Professional Documents
Culture Documents
Paper Spec
Paper Spec
定量 Grammage g/㎡ 目标 Target 227-233 247-252 267-272 297-303 345-355 395-410 445-460
耐破指数(强度)Burst Index* N.m/g 最小 Minimum 1.8 1.8 1.8 ---- ---- ---- ----
横向厚度差 Thickness
% 最大 Maximum 5.0
difference (CD)
横向定量差
% 最大 Maximum 5.0
Grammage difference (CD)
白度 Whiteness % 最小 Minimum 80.0
2
0.2-1.0 mm ≤10
2
尘埃度 Dust degree 个/㎡ 1.0-1.5mm ≤2
2
>1.5mm 0.0
横向耐折度
次 目标 Target ≥15
Foliding strength CD*
备注:
1.测试条件Conitiong of testing:温度(Tempernture):23±1℃ 相对湿度(Relative humidity):50±2%。
2.*为参考项目,不作等级判定依据,对横幅定量和厚度的偏差以复卷后小卷进行分区控制。* for reference items, no grading basis shall be used, and the
quantitative and thickness deviation of the banner shall be divided into small volumes after rewinding.
3.成品为平板纸或卷筒纸,尺寸偏差不超过+3/-1mm,卷筒纸线长偏差标准为±20m。The finished product is flat or reel, the size deviation shall not
exceed + 3/1mm, and the length deviation standard of reel line shall be ±20m.
4.使用卷筒印刷或覆膜、吸塑等特殊加工的需提前告知我司。The use of reel printing or film, blister, and other special processing should be informed
in advance.
5.本指标自2022年12月10日起执行,如有修改,我司将及时告知。This index will be implemented from Dec 10, 2022. If there is any modification, we
will inform you in time.
12/10/2022